• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.653-660
• /
• 1996

For oxygen PSA process development, adsorbed amount of oxygen and nitrogen on various adsorbents were measured corresponding Langmuir isotherm parameters were measured. A reasonable adsorbent for oxygen process was selected based on the effective adsorbed amount. The PSA process consists of adsorption, desorption, pressurization, purging and pressure equilization steps. Adsorption pressure was about 2 atm and desorption pressure was between 120 torr to 400torr. Cycle time of 2-bed PSA process was 80 seconds and that of 3-bed oxygen PSA process was 180 seconds. In order to compare and analyze operation characteristics and economic feasibilities of 2-bed and 3-bed oxygen PSA processes, productivity, oxygen concentration and recovery were compared and the effect of purge and pressurization steps on the performance of PSA processes were analyzed. For the commercial scale oxygen PSA process, capital and electricity cost were estimated. In the range of $O_2$ production less than $700Nm^3/hr$, the 2-bed process is conformed more feasible in economic view point.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.11C
• /
• pp.955-962
• /
• 2008

Multicast Strategy is one of the cost-saving methods in the large scale VOD environment. However, it does involve complicated problems to implement VCR-like interactions for user's convenience in the multicast streaming system under considering the limited-server and the network's bandwidth in the multicast-transmission system. Therefore, the proper solution of settling such a problem is necessary. Thus, this paper which revised P2Patching[l] proposes LGST(Level Group Streaming Technique) which supports the VCR's function through cooperation among peers with heterogeneous bandwidth under the environment of P2P. This strategy can reduce latency by improving the acceptance of server and using the bandwidth of network efficiently. And for evaluate the proposed scheme's performance, I simulated the performance of streaming delivery topology and streaming quality in comparison with P2Patching. In evaluation to service request refusal ratio and service quality according to bandwidth decrement, the result of simulation shows that proposed LGST improves about $11{\sim}18%$ of performance than P2Patching. In the test of latency recovery according to fault probability and influence of VCR function operation duration, it shows similar performance.

• Clean Technology
• /
• v.17 no.4
• /
• pp.406-411
• /
• 2011

A detailed database of waste heat is built to propose energy exchange networks to recover waste energy in Pohang Steel Industrial Complex. A visualized technique is used to figure out the status of waste heat energy and to suggest potential energy exchange networks. Several energy networks are proposed in terms of temperature level, the amount of available energy, distance, and construction cost. A simple economical assessment is applied to the energy exchange networks which have higher economic potential. Their average payback period is estimated to be 2.8 years. The total amount of energy saving by constructing the proposed energy exchange networks is 4,778 TOE per year. It corresponds to 11,160 ton $CO_2$ reduction with the assumption that the recycled waste energy replaces the use of LNG in energy-demanding companies.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.17 no.2
• /
• pp.131-140
• /
• 2004

It really needs fuzzy decision making of integrity assessment considering about both durability and load carrying capacity for maintenance and administration, such as repairing and reinforcing. This thesis shows efficient models about reinforced concrete structure using CART-ANFIS. It compares and analyzes decision trees parts of expert system, using the theory of fuzzy, and applying damage & diagnosis at reinforced concrete structure and decision trees of integrity assessment using established artificial neural. Decided the theory of reinforcement design for recovery of durability at damaged concrete ＆ the theory of reinforcement design for increasing load carrying capacity keep stability of damage and detection. It is more efficient maintenance and administration at reinforced concrete for using integrity assessment model of this study and can carry out predicting cost of life cycle.

• Journal of the Korea Society of Computer and Information
• /
• v.1 no.1
• /
• pp.105-128
• /
• 1996

The maintenance cost accounts for over a half of all software costs. Maintenance tools can be used to reduce It. All other maintenance techniques. reverse engineering Is a process of analyzing source code to extract design information and to create representation of it In another form or at the higher level of abstraction. In this thesis. we propose a method to extract the call relationships among programs. the logic structure In program and the data flow of programs iron COBOL source Programs using reverse engineering. We also present a method to generate the structure chart of programs and modules. The structure chart generated from source code provides very important information to understand programs In details. The structure chart modified will be more helpful the maintainer to understand programs when he analyzes them later or others analyze them.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.61
• /
• pp.327-358
• /
• 2014

During the past decade after entering the World Trade Organization (WTO), China has quickened its integration into the global economy while its foreign trade has been further invigorated. On the 10th anniversary of China's accession to the WTO, the Chinese government issues White Paper to give a comprehensive introduction to China's foreign trade development. Through this paper, the Chinese government introduces I. Historic Progress in China's Foreign Trade II. Reform of and Improvements to China's Foreign Trade System III. The Development of China's Foreign Trade Contributes to the World Economy IV. Promoting Basically Balanced Growth of Foreign Trade V. Constructing All-round Economic and Trade Partnerships with Mutually Beneficial Cooperation VI. Realizing Sustainable Development of Foreign Trade. At present, the underlying impact of the international financial crisis, the protracted, arduous and complicated nature of the world economic recovery is manifesting itself, and the global economic structure and trade layout face in-depth readjustment. China will make new adjustments to its foreign trade, in an effort to turn foreign trade from scale expansion to quality and profit improvement, and from mainly relying on its low-cost advantage to enhancing its comprehensive competitive edge, thereby turning China from a big trading country to a strong trading power. China's foreign trade is still hampered by many uncertainties and is bound to meet new difficulties and challenges. During the 12th Five-year Plan period China will open itself wider to the outside world as a driver for further reform, development and innovation, make full use of its advantages, strengthen international cooperation in all respects. And at the same time China integrate itself into the world economy on a wider scale and at a higher level. China is willing to work with its trading partners to cope with the various challenges facing the world economy and trade, and promote its foreign trade to realize a more balanced, coordinated and sustainable development, and share prosperity and mutually beneficial results with its trading partners.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.9 s.339
• /
• pp.71-84
• /
• 2005

A 'VPN over Intemet' has the benefit of being cost-effective and flexible. However, it has difficulties providing sufficient QoS and adequate transmission capacity for high bandwidth service. Given the increasing demand for high bandwidth Internet and QoS assurances in a 'VPN over Internet', IP/GMPLS based on a control plane combined with a high bandwidth, DWDM optical network is seen as a very favorable anroach for realizing the future 'OVPN over IP/GMPLS over DWDM'. Within this architecture, providing QoS guaranteed multimedia services with a differentiated QoS guaranteed protocol framework with QoS recovery is one of the key issues to implement. Therefore, in this paper, we suggest the entire interoperability procedure of control protocols based on differentiated optical QoS service (DOQOS) classes for providing end-to-end QoS in an 'OVPN over IP/GMPLS over DWDM' architecture.

• Korean Chemical Engineering Research
• /
• v.49 no.6
• /
• pp.865-868
• /
• 2011

An organic substance, hydroquinone is used to form clathrate compounds in order to identify separation characteristics of carbon dioxide in flue gas. Formed samples were analyzed by means of the solid-state $^{13}C$ nuclear magnetic resonance (NMR) and Raman spectroscopic methods to examine enclthration behaviors of guest species. In addition, elemnetal analysis was also performed in order to evaluate separation efficiency of $CO_2$ in a quantitative way. Based on the experimental results obtained, $CO_2$ molecules are found to be captured into the clathrate compound more readily than $N_2$ molecules. Moreover, because such preferential enclathration is even more significant at low pressure conditions, $CO_2$ separation/recovery from flue gas can be achieved with minimizing additional energy cost for the technique. Experimental results obtained in this study can provide useful information on separation techniques of flue gas or selective separation of gas mixtures in the future.

• Korean journal of applied entomology
• /
• v.21 no.4 s.53
• /
• pp.191-194
• /
• 1982

Using the two different trunk-implantation methods, the systemic insecticides omethoate $(Folimat^{(R)}\;50\;EC)$, vamidothion $(Kilval^{(R)}\;40\;EC)$, methamidophos $(Tamaron^{(R)}\;60\;SL)$, phosphamidon $(Dimecron^{(R)}\;50\;EC)$, monocrorotophos $(Nuvacron^{(R)}\;24\;EC)$, dimethoate $(Rogor^{(R)}\;50\;EC)$, and phosalone$(Rubitox^{(R)})$ were evaluated for the control of the pine gall midges(Thecodiplosis japonensis Uchida et Inouye). Except phosalone, all the insecticides tested in this experiment were very effective for the suppression of the gall incidence by the insects. There was no significant difference in effectiveness between the conventional drilling and improved Mauget methods, and trunk-implantation of the insecticides by the improved Mauget method seemed to be much more feasible in practical view points of the labor cost saving the recovery of the holes drilled.

• STI Policy Review
• /
• v.3 no.2
• /
• pp.152-171
• /
• 2012

In April 2001, many Japanese national institutes were reorganized as Independent Administrative Institutions (IAI) based on the General Act for Independent Administrative Institutions and the act for each institution. Under the Ministry of Education, Culture, Sports, Science and Technology (MEXT), the National Institute for Materials Science (NIMS) was established by the merger of the National Research Institute for Metals (NRIM) and the National Institute for Research in Inorganic Materials (NIRIM). One of the biggest changes was the expansion of autonomous administration. The nanotechnology and material R&D field was prioritized in the 2nd (2001-2005) and the 3rd (2006-2010) Science and Technology Basic Plans; subsequently, NIMS was assigned to take the initiative in nanotechnology as well as materials science. NIMS has proactively expanded research fields through the introduction of researchers from polymers, electronics, and biotechnology as well as member institutes of the World Materials Research Institute Forum (WMRIF). Globalization has been promoted through programs that include the International Center for Young Scientists (ICYS) and the International Center for Materials Nanoarchitectonics (MANA). The 4th Science and Technology Basic Plan (2011-2015) emphasizes outcomes-recovery and rebirth from the disaster, green innovation, and life innovation. The Midterm Plan for NIMS also follows it. R&D collaboration by multi-partners (that include industry, university, and GRI) should be strategically promoted where GRI are especially required to play a hub function for innovative R&D and open innovation. NIMS highlights are Tsukuba Innovation Arena (TIA) and the Nanotechnology Platform Project. On January 20, 2012, a new organization was decided on by the Japanese Government where several IAI from different science and technology areas will be merged to realize more effective R&D as well as administrative cost reductions. NIMS is also supposed to be merged with 4 other R&D IAI under MEXT by the end of 2013.