• Smart Structures and Systems
• /
• v.14 no.5
• /
• pp.765-784
• /
• 2014

In comparison with conventional shape memory actuated structures, antagonistic shape memory alloy (SMA) actuators permits a fully reversible two-way response and higher response frequency. However, excessive internal stress could adversely reduce the stroke of the actuators under repeated use. The two-way shape memory effect might further decrease the range of the recovered strain under actuation of an antagonistic SMA actuator unless additional components (e.g., spring and stopper) are added to regain the overall actuation capability. In this paper, the performance of all four possible types of SMA actuation schemes is investigated in detail with emphasis on five key properties: recovered strain, cyclic degradation, response frequency, self-sensing control accuracy, and controllable maximum output. The testing parameters are chosen based on the maximization of recovered strain. Three types of these actuators are antagonistic SMA actuators, which drive with two active SMA wires in two directions. The antagonistic SMA actuator with an additional pair of springs exhibits wider displacement range, more stable performance under reuse, and faster response, although accurate control cannot be maintained under force interference. With two additional stoppers to prevent the over stretch of the spring, the results showed that the proposed structure could achieve significant improvement on all five properties. It can be concluded that, the last type actuator scheme with additional spring and stopper provide much better applicability than the other three in most conditions. The results of the performance analysis of all four SMA actuators could provide a solid basis for the practical design of SMA actuators.

• Journal of Embryo Transfer
• /
• v.15 no.2
• /
• pp.181-190
• /
• 2000

This study was carried out to establish an effective embryo production system by analyzing several factors ifluencing in vivo embryo production in Hanwoo. The results are summarized as follows : 1. The number of total, fertilized and transferble embryos by gonadotropins were no significant difference among PMSG, FSH and FSH+PMSH. 2. The numbers of recovered and transferable embryos by type of FSH were no significant difference in both FSH-P and FOLLTROPIN-V but significant difference with SUPER-OV(p<0.01). 3. The numbers of recovered and transferable embryos by age of donor were highest in 5 years old. 4. The recovered number of transferable embryos was highest in the cows at the 1 st and 3rd parity but significantly lower in hifers and the cows at more than 6th parities(p<0.01). 5. The numbers of trasferable embryos by postparient were more<270 days than > 270 days in significant difference(p<0.01). 6. Embryo production after treatment of repeated super ovulation was no significant difference. 7. Recovered and trasferable embryos production after treatment of repeated super ovulation interval was highest 81∼100 days and significant difference(p<0.01). 8. The numbers of recovered and transferable embryos by seasons were no significant difference.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.6
• /
• pp.337-342
• /
• 2007

The formation of lysinoalanine (LAL) in protein recovered from the belanger's croaker, Johnius grypotus, using a pH shifting process was measured by amino acid analysis. The LAL peak was detected at 49.24 min, between phenylalanine and histidine peaks in the amino acid analyzer. LAL was not detected in the fish muscle or in protein recovered using the alkaline pH shifting process. LAL was not formed in protein recovered after storage for up to 9 hrs at pH 11, but was detected in the soluble protein fraction at pH 11, followed heating at $90\;^{\circ}C$. The myosin heavy chain decreased with storage time at pH 11. The results suggest that the alkaline shifting process for recovering fish muscle protein is safe, and that no LAL forms.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.98-105
• /
• 2015

Demands of thermal recording paper have been increased significantly by increase in usage of invoice, fax, and label. Thermal recording paper was mainly made based on virgin fiber. It is necessary to find a suitable alternative to virgin fiber in terms of environment protectional resources conservation. In this paper, deinking properties of different recovered papers were analyzed in order to use the recovered paper as raw material of thermal recording paper. Recovered paper were ONP, OMG and white ledger. Flotation reject of OMG was high because inorganic pigments in coating layer could be removed by upstream of froth. Brightness of white ledger and OMG were much higher than that of ONP. Therefore, properties of pulp made from the recovered paper could be enhanced with increase in blending ratio of white ledger and OMG. However, blending ratio of OMG caused the increase of flotation reject. Consequently, the optimum blending ratio of ONP, OMG, and white ledger was 3:3:3 for eco-friendly thermal recording paper. Under the condition, brightness was about 70% and ERIC was below 300 ppm.

• Journal of Powder Materials
• /
• v.24 no.2
• /
• pp.141-146
• /
• 2017

$Bi_2Te_3$ powders are recovered by wet chemical reduction for waste n-type thermoelectric chips, and the recovered particles with different morphologies are prepared using various surfactants such as cetyltrimethylammonium bromide (CTAB), sodium dodecylbenzenesulfonate (SDBS), and ethylenediaminetetraacetic acid (EDTA). When citric acid is added as the surfactant, the shape of the aggregated particles shows no distinctive features. On the other hand, rod-shaped particles are formed in the sample with CTAB, and sheet-like particles are synthesized with the addition of SDBS. Further, particles with a tripod shape are observed when EDTA is added as the surfactant. The growth mechanism of the particle shapes depending on the surfactant is investigated, with a focus on the nucleation and growth phenomena. These results help to elucidate the intrinsic formation mechanism of the rod, plate, and tripod structures of the $Bi_2Te_3$ recovered by the wet reduction process.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.3 no.1
• /
• pp.1-15
• /
• 1999

Gradient recovery techniques for the second order elliptic boundary value problem are well known. In particular, the Midpoint and the Vertex Recovery Operator have been studied by various authors and under suitable assumptions on the regularity of the unknown solution superconvergence property of these recovered gradients have been proved. In this paper we extend these results to the recovered gradient of the finite element approximation to a model initial-boundary value problem, and go on to prove superconvergence result for this recovered gradient in a discrete (in time) error norm.

• Korean Journal of Veterinary Research
• /
• v.15 no.2
• /
• pp.321-325
• /
• 1975

Trials of therapeutic examination with yuhyangsan, tnicture of iodine and Villat's solution were attempted on 12 dairy cows suffering from interdigital dermatitis In the yuhyangsan treatment group, tincture of iodine group and Villat's group, 4 cases of diseased cow were allocated, respectively, and those drugs were locally applied. In the yuhyanson treated group, all of the cases were recovered by the sixth treatment, In the tnicture of iodine treated group, 2 cases of diseased cow were recovered by the sixth treatment. In the Villat's treated group, all of cases were not recovered by the sixth treatment.

• Resources Recycling
• /
• v.28 no.3
• /
• pp.21-25
• /
• 2019

The utilization of incineration ash from municipal waste must be promoted to solve the social problem on the shortage of final disposal site. In this research, metals should be recovered to avoid the damage of the crushing machine during the utilization of incineration ash in cement industry. In fact, incineration bottom ash from municipal waste contains iron in 3-5%. Nonferrous metal and stainless steel in 1% is also included. The research and development on the physical recovery process was performed not only to remove the metals but also to recover high grade products. Metals were separated from incineration ash in Maruya Co. Ltd.. In fact, iron scrap recovered by magnetic separation can be selled. After that, mixed metal was separated from incineration ash using screen. In this research, mixed metal tried to divided copper, aluminum, brass and stainless steel using drum type magnetic separation, eddy current separation and high magnetic separation. As a result, recovered iron had an 80% for the grade. Aluminum was recovered by eddy current separation without copper and brass.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.10a
• /
• pp.211.1-211
• /
• 1999

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.3
• /
• pp.204-209
• /
• 2003

Utilization of soluble protein recovered from surimi wastewater using calcium powder of cuttle bone were examined. The crude ash content of the heat-induced surimi gel was increased linearly by increasing substitution ratio of recovered protein-ATC toward commercial surimi. Moisture (approximately $76\%$) and lipid $(0.2\%)$ contents were not change, but their protein contents were decreased 15.7 to $14.3\%$ depend on increasing of substitution ratio. The white index of the heat-induced surimi gel by color meter was increased up to $10\%$ of substitution ratio. There were no difference between $0\%\;and\;5\%$ substituted surimi gel in the gel strength. The sensory score on white index and texture of the heat-induced surimi gel did not change in 0 to $10\%$ as a substitution ratio of recovered protein-ATC toward commercial surimi, while decreased in more $15\%.$ The optimal substitution ratio of recovered protein-ATC as a bulking agent was $10\%.$ The heat-induced surimi gel prepared with $10\%$ substitution of recovered protein-ATC was similar to the content and composition of total amino. acids, and superior to calcium content and the ratio of calcium and phosphorus toward those of commercial surimi.