• 대한전자공학회논문지SD
• /
• 제40권2호
• /
• pp.88-97
• /
• 2003

본 논문에서는 위상부호 홀로그램 중첩 시스템에 대한 모의실험을 통하여 동일한 회절효율을 갖기 위한 각 홀로그램들의 기록시간을 계산한 후 이것을 하나의 이론식으로 유도하였다. 이러한 이론식을 이용하여 8비트, 16비트 및 32비트 위상부호 홀로그램 중첩 시스템에서의 홀로그램 회절효율이 각각 ±5%, ±7.2% 및 ±8.4%이내의 오차로 균일하게 주어짐을 모의실험을 통해 확인하였다. 그 다음 서로 다른 4개의 홀로그램을 BaTiO₃결정체에 중첩 저장 및 복원하는 실험을 실시하여 본 논문의 시간 분배가 기존의 방법에 비하여 복원되는 홀로그램들의 회절효율을 더욱 균일하게 만든다는 것을 확인하였다.

• 정보저장시스템학회논문집
• /
• 제3권3호
• /
• pp.139-143
• /
• 2007

In recent years new recording media and materials for head-disk interface (HDI) have been developed in order to increase the recording density of storage devices and decrease the cost of production. It is well known that HDI in hard disk drive (HDD) needs high durability and stability. The tribological characteristic of commercialized HDI systems is an important indicator of the HDD reliability. In this study, experimental investigation on the wear coefficient of commercialized hard disk slider pads was performed. The slider was placed on top of a hard disk and allowed to slide for a set distance. The wear of the pads was measured after the sliding tests. The result showed that the micro-bumps in commercialized HDD have extremely low wear coefficient of $10^{-11}$. The results of this work may be used for further development of the HDI technology for HDD.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.67-72
• /
• 2005

This study proposes a design methodology to determine the optimum configurations of the optical flying head (OFH) for near-field recording systems. Since the OFH requires stricter static and dynamic characteristics of slider air-bearings within an optical tilt tolerance over the entire recording band, an optimum design to keep the focusing and tracking ability stable is essential. The desired flying characteristics considered in this study are to minimize the variation in flying height between the SIL and the disk from a target value, satisfying the restriction of the minimum flying height, to keep the pitch and roll angles within an optical tilt tolerance, and to ensure a higher air-bearing stiffness. Simulation results demonstrate the effectiveness of the proposed design methodology by showing that the static and dynamic flying characteristics of the optimally designed OFH are enhanced in comparison with those of the initial. The gap between the SIL and the disk can be kept at less than 100 nm even if the optical tilt tolerance of the SIL is considered.

• 정보저장시스템학회논문집
• /
• 제5권1호
• /
• pp.41-46
• /
• 2009

In SIL-based NFR servo systems, the residual error and the overshoot that are occurred in the process of the modes-witching servo which consists of approach, gap-control modes, and safety mode are reduced by using PID controller. However, the design method of conventional PID controller is not sufficient for the stable air gap control system. Therefore, the optimal PID controller using LQR manner is more useful to find the designed parameters of PID controller. In this paper, we show that the performance of the optimal PID controller is better than that of the lead-lag controller.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권1호
• /
• pp.129-140
• /
• 2017

In this paper, a $4{\times}32$-channel neural recording system capable of acquiring neural signals is introduced. Four 32-channel neural recording ICs, complex programmable logic devices (CPLDs), a micro controller unit (MCU) with USB interface, and a PC are used. Each neural recording IC, implemented in $0.18{\mu}m$ CMOS technology, includes 32 channels of analog front-ends (AFEs), a 32-to-1 analog multiplexer, and an analog-to-digital converter (ADC). The mid-band gain of the AFE is adjustable in four steps, and have a tunable bandwidth. The AFE has a mid-band gain of 54.5 dB to 65.7 dB and a bandwidth of 35.3 Hz to 5.8 kHz. The high-pass cutoff frequency of the AFE varies from 18.6 Hz to 154.7 Hz. The input-referred noise (IRN) of the AFE is $10.2{\mu}V_{rms}$. A high-resolution, low-power ADC with a high conversion speed achieves a signal-to-noise and distortion ratio (SNDR) of 50.63 dB and a spurious-free dynamic range (SFDR) of 63.88 dB, at a sampling-rate of 2.5 MS/s. The effectiveness of our neural recording system is validated in in-vivo recording of the primary somatosensory cortex of a rat.

• 정보처리학회논문지B
• /
• 제16B권1호
• /
• pp.25-34
• /
• 2009

DVR(Digital Video Recorder)시스템은 기존의 아날로그 테이프 저장 시스템과는 달리 영상 입력을 디지털 신호로 변환하여 압축 저장하는 장치로서 기존의 실시간 감시, 녹화, 검색 기능의 개선은 물론 워터마킹, 무선 감시 등의 부가기능 추가 및 응용이 가능하게 되어 아날로그 테이프 저장 장치를 대체해 가고 있다. DVR 시스템에서 녹화 및 검색용 동영상 파일 포맷으로는 AVI 포맷이 가장 널리 쓰이고 있다. 그러나 AVI 포맷은 구조적인 문제로 DVR의 녹화와 검색을 위해 최적이라 할 수 없다. 일부 DVR 업체에서는 AVI 포맷을 대체하기 위한 자체 포맷을 개발하여 사용하고 있지만 공개된 파일 포맷은 없는 실정이다. 본 논문에서는 DVR 전용 파일 포맷인 ESP 포맷을 제안한다. ESP 파일 포맷은 AVI 포맷의 문제점을 해결하면서 AVI 포맷의 장점들은 최대한 적용하였다. ESP 포맷은 다중 스트림 녹화 및 이벤트 녹화도 지원하여 기존 DVR 시스템의 녹화 및 검색 기능을 개선시킨다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2004년도 하계학술연구발표회 논문개요집
• /
• pp.11-11
• /
• 2004

• 정보저장시스템학회논문집
• /
• 제6권1호
• /
• pp.12-17
• /
• 2010

Thermally-assisted magnetic recording (TAMR) is a potentially promising approach to increase the storage density of hard disk drive (HDD). However, TAMR has some issues such as temperature effects, media problems, thermal deformation and light delivery. In this research, we focused on light delivery. One of the powerful methods to deliver the light from laser diode to recording medium is the use of an optical fiber and a specially designed prism. However, the TAMR with optical fiber may have some flyability problems induced by the mounted optical fiber and prism. Also, the TAMR suspension using an optical fiber has high vertical and pitch stiffness. Therefore, p-torque is greatly increased by the optical fiber. Also, flying height (FH) of the slider with TAMR suspension can be largely changed by p-torque. Therefore, in this paper, we focus on the pitch static attitude (PSA) tolerance and the FH by PSA of the TAMR suspension. The FH is investigated using various errors and the PSA tolerance for TAMR suspension is proposed.

• 정보저장시스템학회논문집
• /
• 제3권1호
• /
• pp.1-4
• /
• 2007

A high density optical data storage device has been required for many years. In the field of the optical data storage, a near-field recording (NFR) technology is considered as a next generation one for achieving the high data density. Due to an evanescent wave effect occurred under 100nm distance which is the excessively small distance between the SIL and the disc, the most significant and difficult problem in this technology is to maintain a gap between a solid immersion lens (SIL) and a disc. Also, maintaining the gap under at least 50nm is required in the NFR gap servo system to use the evanescent wave effect efficiently. There are some institutes that have shown the novel gap servo control. In general, they use a mode switching servo method which consists of approach, hand-over and gap control mode. However there is a critical problem such as an overshoot at the tuning point from the approach mode to the hand-over mode, which may cause a collision between the SIL and the disc. In this paper, we show our NFR system and an improved gap servo system using an exponential function as the approach mode which can reduce the overshoot.

• 한국통신학회논문지
• /
• 제27권1A호
• /
• pp.13-17
• /
• 2002

제어 비트를 통한 직류 성분 제거 방법으로 주로 코드워드 끝단에서의 WRDS(word-end running digital sum) 기준을 적용하고 있다. WRDS 기준에 의한 직류 성분 제거 방법은 계산 및 구현이 쉬운 반면에 제어 비트 및 코드워드의 길이가 길어질수록 성능이 저하되는 단점이 있다. 복잡도가 높은 대신 최적의 성능을 갖는 방법으로 MSW(mean-square weight) 기준이 있다. 본 논문에서는 MPRDS(minimum peak RDS)라는 고밀도 광 기록 저장 장치를 위한 변조 코드의 새로운 직류 성분 제거 방법을 제안하였다. 이 방법은 계산 및 구현상의 복잡도가 MSW 기준에 비해 현저하게 낮으면서도 제어 비트 및 코드워드의 길이가 증가하더라도 MSW 기준에 의한 성능에 근접함을 입증하였다.