• Proceedings of the Korean Magnestics Society Conference
• /
• 2008.12a
• /
• pp.134.1-134.1
• /
• 2008

• Electrical & Electronic Materials
• /
• v.8 no.5
• /
• pp.558-563
• /
• 1995

Dynamic characteristics of TbFeCo magneto-optical recording media at 680nm wavelength region were studied by means of computer simulation of disc structure and optimization of process variables during sputter deposition. With the slightly reduced Kerr rotation angle due to the reduced wavelength of optical laser source, the improved recording density in TbFeCo magneto optical media showing the CNR greater than 50dB could be achieved by only adjusting the thickness of dielectric and the recording layers when the wavelength of light source is changed from 780nm to 680nm. In addition, the recording power margin of 5mW and the 2mW minimum recording power was realized, It was shown from the present study that the increase in laser power density demonstrated feasibility of low cost and low power laser diode with the reduced optimum recording power.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.690-694
• /
• 1995

Reducing media noise is a key to realizing high areal recording density. However, perpendicularly oriented Co-Cr films, stong candidates for high density recording media, have received little attention in terms of recording noise. We studied the noise characteristics of Co-Cr based alloy films by varying the compositionally separated structure. Co-Cr films with fine compositionally separated microstructure were observed to have low noise, which recording density dependence were negative or week. Studies on control of the microstructure and magnetic properties in combination with noise analysis are important to realize high density recording media.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.1938-1939
• /
• 2001

시스템을 입력과 출력간의 함수관계로 볼 때 출력에 대한 상대차수가 정의되지 않는 점을 특이점이라고 정의할 수 있다. 본 논문에서는 적절한 기하학적 조건을 만족하는 해석적인 시스템(analytic system)에 대하여 그러한 특이점의 성질을 살펴본다. 특이점을 지나는 궤적은 특이점의 특이도와 그에 관련된 함수 값의 부호에 의해서 특이점의 주변에서는 특이 매니폴드를 기준으로 한 영역에서 나머지 다른 영역으로 통과하거나 혹은 그를 기준으로 어느 한 쪽의 영역에만 머물러 있게 됨을 보임으로써 특이점과 이를 지나는 궤적의 상관관계를 명확히 규명하였다.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2008-2010
• /
• 2001

최근에 광 디스크 기기의 고배속화에 따라서 디스크의 재생 속도는 점차로 증가하고 있다. 이러한 경향에 따라 트랙킹 제어 루프에서 나타나는 디스크의 편심에 의한 외란의 영향은 더욱 커지게 되므로 기존의 선형 제어기만으로는 디스크의 편심량이 큰 경우에 고배속에서 원하는 트랙 추종 성능을 얻을 수가 없다. 본 논문에서는 이러한 문제점을 해결하기 위해서 반복 학습 제어 알고리즘과 드라이브 시스템의 액츄에이터의 주파수 응답 특성을 이용한 새로운 트랙 추종 제어 방법을 제안한다. 또한, 제안된 트랙 추종 제어 시스템의 제어 성능을 실험을 통하여 검증하여 본다.

• Macromolecular Research
• /
• v.9 no.6
• /
• pp.313-318
• /
• 2001

The present study relates to a method of manufacturing 100$\mu\textrm{m}$ thick cover layer for the high density digital versatile disc system (HD-DVD), which uses a high numerical aperture of 0.85 at 405 nm wavelength. Spin coating technique was investigated as means for manufacturing the cover layer within sufficient margins of thickness variation and with good mechanical properties including small radial and tangential tilts. The influence of processing variables such as spinning speed, spinning time, and dispensing position was investigated. The effect of viscosity of UV-curable resin was also investigated.

• Electrical & Electronic Materials
• /
• v.8 no.1
• /
• pp.64-70
• /
• 1995

We discussed the thermal analysis for a recording media with the variation of the laser pulse duration, the laser power and the temperature distribution in order to optimize the Te-based antireflection structure from the computer calculations. In the case that the radial heat diffusion is negligible, we can calculate the maximum temperature of the recording layer at the center of the spot by the Simple Model. The temperature profile of the recording layer is obtained from the Numerical Model by considering the total specific heat and the latent heat. As a result, the effect of the heat sinking acting as a thermal loss for the hole formation could be minimized by introducing the pulse with the hole formation duration(.tau.) below the thermal time constant(.tau.$_{D}$) of a dielectric layer. These requirments can be satisfied by using the dielectric thickness of the 2nd ART(Anti-Reflection Trilayer) condition or the dielectric materials with a low thermal diffusivity.y.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.5
• /
• pp.444-450
• /
• 2000

We prepared Co-Cr thin film for perpendicular magnetic recording media with facing targets sputtering system(FTS system) which can deposit a high quality thin film in plasma-free state and wide range of working pressure. The effect of sputtering conditions(argon gas pressure and substrate temperature) on the magnetic and the crystallographic characteristic of Co-Cr thin film was investigated. And the variation of perpendicular coercivity with the variation of film thickness was studied. As a result we obtained the high perpendicular coercivity of 1900Oe and the good dispersion angle of c-axis($\Delta$$\theta$$_{50}$) of 5$^{\circ}$on the film thickness of 100nm for the promising recording layer of perpendicular magnetic recording media.c recording media.a.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.821-826
• /
• 2012

Two-dimensional magnetic recording (TDMR) is treated as the next generation magnetic recording method, but because of its high channel bit error rate, it is difficult to use in practices. In this paper, we introduce a new writing method that can decrease the nonlinear media error effectively, and it can also achieve 10 Tb/$in^2$ of user bit density on a magnetic recording medium with 20 Teragrains/$in^2$.

• Journal of Magnetics
• /
• v.3 no.1
• /
• pp.21-30
• /
• 1998

An artificially modulated magnetic Co/Pd multilayer is one of the promising candidates for high density magneto-optic (MO) recording media, due to large Kerr rotation angle in the wavelength of a blue laser beam. however, since multilayer structure, as well as amorphous structure, is a non-equilibrium state in terms of free energy and MO recording is a kind of thermal recording which is conducted aound Curie temperature (Tc) of the recording media, when the multilayer is used for the MO recording media, changes in the multilayer structure are occurred as the amorphous structure do. Therefore, the assessment of the structural stability in the Co/Pd multilayer is crucially important both for basic research and applications. As the parameter of the structural stability in this research, modulation amplitude and particle size of the Co/Pd multilayer are measured in terms of Ar sputtering pressure and heat treatment temperature. From the results of the research, we find out that the magnetic exchange energy in the structural changes of a magnetic multilayer structure and suggest the operating temperature range for MO recording in the Co/Pd multilayer for the basic research and applications, respectively.