• 유기물자원화
• /
• 제21권4호
• /
• pp.50-61
• /
• 2013

교내 식당에서 분리 수거된 음식물류 폐기물에서 재생 에너지인 메탄가스를 생산하기 위해 혐기성 소화시스템에 대한 연구가 수행되었다. 1차 실험에서 침출수 인발/반송도 없고 혼합도 없는, 침출수 인발/반송은 없고 혼합이 있는, 침출수 인발/반송은 있고 혼합이 없는, 그리고 침출수 인발/반송은 있고 혼합이 있는 4개의 혐기성 시스템에서 침출수 인발/반송은 있고 혼합이 없는 시스템에서 가스발생이 가장 많은 것으로 나타났다. 반응조 혼합이 없고 침출수 인발/반송이 수행되는 시스템에서는 침출수의 반응조 내 침출수 유출속도가 빠른 경우에 혐기성 반응이 활발히 일어난 것으로 관찰되었다. 가스수집기 무게가 1kg이고 음식물류 폐기물 C/N비가 10이상이 되는 경우 혐기성 반응조의 가스가 소모되어 가스수집기에 부압이 걸리는 것이 관찰되었는데, 이에 대한 원인을 밝히는 것이 음식물류 폐기물에서 재생에너지를 회수하는데 필수적이다.

• 분석과학
• /
• 제25권6호
• /
• pp.416-420
• /
• 2012

재활용 제품의 사용이 증가함에 따라 이에 대한 위해성 평가가 필요한 실정이다. 본 연구에서는 재활용 제품 중 재활용 고무분말을 이용한 놀이터용 바닥재와 해당 고무분말의 중금속 함량을 비교하였다. 또한 각각의 물질이 경피로 전이되는 양을 확인하여 피부에 흡수되는 중금속 노출 특성을 살펴보았다. 아연의 경우 함량이 높은데 반해 전이량이 0.1 $mg/cm^2$으로 매우 낮았는데 이는 아연은 표면 접촉으로는 잘 묻어나지 않는다는 것을 나타낸다. 그러나 철과 알루미늄의 경우, 함량이 바닥재에서 12 배 높게 나타났고, 전이량이 아연보다 약 5 배 높게 나타났다. 이것은 철과 알루미늄이 바닥재에 사용된 안료에서 기인했다는 것을 말한다. 놀이터 6 개소를 대상으로 피부 흡수에 의한 중금속 노출량을 산정한 결과, Ba의 경우 타 중금속에 비하여 비교적 높게 산정되었다. Zn의 함량이 높음에도 불구하고 Ba의 노출량이 더 높은 것은 Ba의 피부흡수율이 Zn에 비해 약 5 배 높기 때문인 것으로 판단된다.

• 에너지공학
• /
• 제25권4호
• /
• pp.152-158
• /
• 2016

연소기기에서 연소반응과정이 일어날 때 연소로 내 고온의 온도 분위기에서 공기 중의 산소와 질소가 반응하여 질소산화물이 발생하게 된다. 발생한 질소산화물을 저감하기 위하여 화력발전소나 폐기물 소각로는 촉매를 이용한 탈질설비를 설치하고 있는데 이에 따른 설치와 유지비용이 많이 소요된다. 연소기기에서 질소산화물을 저감하기 위한 여러 가지 방법 중에 배기가스 재순환 방법이 널리 쓰이고 있다. 본 연구에서는 배기가스 재순환 배관에 코안다 노즐을 사용하여 배기가스를 재순환하는 재순환 버너에 대하여 전산유체해석을 통해 연구를 수행하였으며 냉간 유동에서 배기가스 재순환 유동 특성을 살펴보았고 코안다 노즐의 공기 측 간격 변화와 공기 유량 변화에 따른 배기가스 재순환 유량 특성을 살펴보았다. 본 연구의 버너 형상은 배기가스 재순환 흡입구와 출구는 원통 버너의 중심을 향하지 않고 접선 방향으로 설치되어 있어서 버너 내부에서 선회 유동이 형성 되었으며 이에 따라 원통 내부의 중심부분에 역류가 일어나는 특성을 관찰하였다. 또한, 코안다 노즐의 공기 측 간격은 0.5mm일 때는 배기가스 재순환 유량이 공기량 보다 약 2.5배 이었고 1.0mm일 때는 약 1.5배로 나타났으며 같은 공기 측 간격에서 공기량을 증가하면 배기가스 재순환 유량은 약간 증가하는 것을 알 수 있었다.

• 한국농공학회논문집
• /
• 제47권3호
• /
• pp.69-76
• /
• 2005

An Absorbent Biofilter System (ABS) combined with the recirculation process was investigated for the feasible application in additional removing of organics (BOD, SS) as well as nutrients (TN, TP) from small Community wastewater in Korea. Polyurethane biofilter media with high porosity and large surface area were /used for the aerobic system. A part of treated wastewater was recirculated into the anoxic septic tank to promote removal of nutrients. The concentrations of BOD and SS of treated wastewater satisfied the regulations for small on-site wastewater treatment facility (10 mg/L) during the overall experimental period. The effluent concentrations of BOD and SS were decreased with enhancement of removal efficiencies of 95.7 and $96.7\%$. The nitrogen and phosphorus removal efficiencies by the recirculation increased to $52.9\%\;and\;43.2\%$ in average during the overall experimental period, respectively. With the improvement, these values were increased as much as additional 42 and $18\%$ compared with those of non-recirculation. The rates of nitrification and denitrification were enhanced showing $65\~77\%\;and\;42\~92\%$, respectively. The described process modification is a low cost and effective method of enhancing nitrogen and phosphorus removal, especially on existing systems without changing major design components of a treatment facility.

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.430-439
• /
• 1990

Steady state turbulent airflow and unsteady characteristics of generation, transportation, and recovery behavior of contaminate particles in the simplified 2 dimensional Vertical Laminar Flow (VLF) type clean room was numerically simulated using the low Reynolds number k-over bar.epsilon- turbulent model. Characteristics of airflow in VLF type clean room are greatly affected by the recirculation zone around working surface. The recirculation zone must be considered at the time of clean room design because the recirculation zone whose area increases with increment of inlet velocity exerts bad influence upon the performance of clean room in terms of particle contamination. The location of maximum particle concentration changes from the location of particle source to the recirculation zone, while averaged particle concentration is reduced exponentially with time. Recovery time of clean room with spontaneous particle generation source is inversely proportional to inlet velocity. We introduce nondimensionalized recovery time through the dimensional analysis, which can indicates the general performance of clean room with design structure change. It was identified that .tau. is independent of inlet velocity and background concentration. Therefore .tau. can be the simple factor to compare the different structure of clean room in terms of dynamic response to contamination and becomes larger with better structure of clean room.

• 한국분무공학회지
• /
• 제16권2호
• /
• pp.90-96
• /
• 2011

Atomized liquid jets from the washing nozzle which configured with recirculation chamber for cleaning hot-zone area are accelerated and impinged on the head lamp surface. Cleaning efficiency of head lamp can be increased with injecting washing fluids into the hot-zone area. Experimental and numerical studies with various design parameters were executed to reveal the relations between internal geometry and internal flow in the washing nozzle. Spray structures were fitted with each of the head lamp surfaces and spray nozzles were optimized to the spray pattern. The recirculation chamber induces a recirculation flow and can be decreased the pressures perturbation inside the chamber. Orifice determines the mass flow rate. When the diameter of orifice is excessively large, it showed an unstable spray pattern. As a nozzle exit angle increases, density distributions are separated with two section. Also, as a protrusion length of nozzle exit increases, spray patterns are spread into a large area and density distributions showed unstable trend.

• 대한기계학회논문집A
• /
• 제30권12호
• /
• pp.1642-1648
• /
• 2006

This paper describes enhancement of the mixing efficiency of a multilamination micro mixer by adding a number of recirculation zones downstream of the mixing zone. Numerical simulation was employed to estimate the mixing efficiency and the pressure drop under various conditions. Numerical results indicated that recirculation micro mixer brought about not only the increase of the mixing efficiency but also the decrease of the pressure drop. Micro mixers were fabricated using photosensitive glass by anisotropic wet etching technique. The width and height of the micro channel were $150{\mu}m$ and $500{\mu}m$, respectively. The performance of micro mixer was measured using color intensity variation of the fluid. Except for extremely low Re below 40, the recirculation micro mixer of the present study showed improved mixing. And the enhancement of the mixing increased as Re rose. When Re increased beyond 400, more than 90% of the mixing was observed in the experiment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.648-654
• /
• 2011

The feed-water piping system constitutes a complex flow impedance network incorporating dynamic transfer characteristics which will amplify some pulsation frequencies. Understanding pressure pulsation waves for the feed-water recirculation piping system with cavitation problem of flow control valve is very important to prevent acoustic resonance. Feed water recirculation piping system is excited by potential sources of the shock pulse waves by cavitation of flow control valve. The pulsation becomes the source of structural vibration at the piping system. If it coincides with the natural frequency of the pipe system, excessive vibration results. High-level vibration due to the pressure pulsation affects the reliability of the plant piping system. This paper discusses the piping vibration due to the effect of shock pulsation by the cavitation of the flow control valves for the recirculation piping of feed-water pump system in combined cycle power plants.

• 설비공학논문집
• /
• 제19권12호
• /
• pp.857-864
• /
• 2007

In the current residential building, hot water supply system consumes the second largest energy in order to make the thermal comport condition of residential space. The more residential environment improves the more the demand for hot water and water consumption is increasing gradually. So this study examines the possibility of applying the recirculation for individual hot water supply system compared with the existing method for waiting time for hot water, wasted water and energy consumption. The results are as follows. (1) In case of recirculation system method the waiting time for hot water can be reduced up to $69\sim85%$ in spring and fall period and so dose up to $77\sim85%$ in winter period. (2) The total wasted water has a little change compared with the existing method which can make the total wasted water reduced about $77\sim86%$. (3) The efficiency of hot water supply system can be improved, if the method which blocks the inflow of cold water is applied, when return pump is operated to recirculate hot water in recirculation system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1499-1504
• /
• 2004

Flue gas recirculation (FGR) is a method used to control oxides of nitrogen ($NO_x$) in combustion system. The recirculated flue gases resulted in slow reaction and low flame temperatures, which in turn resulted in decreased thermal NO production. Recently, it has been demonstrated that introducing the recirculated flue gas in the fuel stream, that is, the fuel induced recirculation (FIR), resulted in a much greater reduction in $NO_x$ per unit mass of recirculated gas, as compared to introducing the flue gases in air. In the present study, the effect on $NO_x$ reduction in turbulent swirl flame in laboratory scale using FGR/FIR methods through the dilution using $N_2$ and $CO_2$. Results. show the $CO_2$ dilution is more effective $NO_x$ reduction methods because of large temperature drop due to the larger specific heat $CO_2$ compared to $N_2$. FIR is more effective to reduce $NO_x$ emission than FGR when the same recirculation ratio of dilution gas.