• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.642-646
• /
• 2000

The use of neural-fuzzy system to model mesh seam welding is described in this paper. Conventional, automated process generally involves sophisticated sensing and control techniques applied to various processing parameters. Welding parameters affecting quality include the arc voltage, the welding current torch travel speed and the pressure and so on. The relationship between the welding parameters and weld quality is not a direct one, md' in addition, the effect of the weld parameter variables are not independent of the each other. The effectiveness of the proposed neuro-fuzzy algorithms is demonstrated by computer simulations.

• 동력기계공학회지
• /
• 제15권5호
• /
• pp.5-9
• /
• 2011

The hydraulic piston using a hydrostatic bearing has been used widely due to its satisfying performance at very high pressurized circumstance and relative higher power density in comparison to conventional one. For high pressurization, enhanced efficiency and long durability of the hydraulic piston, the design of hydrostatic bearing is at issue, which is installed between piston shoe and swash plate. The performance of the hydrostatic bearing is influenced significantly by the assembly of the piston shoe consisting of circular land and recess. In this study, to estimate the performance of the hydrostatic bearing, the characteristics for lubrication of the assembly of the piston shoe were investigated by measuring a leakage rate of hydraulic fluid under an experimental condition, where a rotating velocity of the piston, hydraulic pressure and temperature of the hydraulic fluid were changed systematically. In addition, a film thickness of the hydraulic fluid on the piston shoe was measured and compared to theoretical one.

• 교육녹색환경연구
• /
• 제10권2호
• /
• pp.61-72
• /
• 2011

The purpose of this study is to carry out the research of the satisfaction level of consumers (students and teachers) and managerial characteristics for model classes of the subject classroom system and to draw the effective plan of the system. The conclusions are as follows First, the biggest advantage of the system is to fulfill the educational goal according to an individual level and ability of each student while the biggest disadvantage is the inconvenience of students to change their classrooms for each specific class. Second, it is necessary to rearrange the classrooms according to the applied subjects from the aspect of curriculum management since the time frame is not convenient for recess. English and mathematics are required preferentially as applied subjects, however Korean (as a national language) and science are needed to be taught with level-differentiated classes, too. The ideal size of classes is most likely 20-25 students according to the result of research. Lastly, the space of environment is another requirement to secure smooth flow of students' movements and extra space for technical devices used for information research. The above analysis indicates the necessity of supplementation in space planning for further implementation of subject classroom system in secondary school.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.96-103
• /
• 1998

With the advance of processing technology , so as to spare fuel, piston heads used in automobile reciprocating engine have complex 3-dimension, with respect to shape such as ovality, profile, eccentricity, offset, recess. Therefore, coming out of the existing process work used master cam. the process work is performed using a CNC lathe. For a precision processing, the processing work is need to make study of high speed feed gear synchronized with the rotative speed of main spindle. And then the high speed feeding system must maintain high dynamic stiffness, high speed and high positioning accuracy . In this paper, in order to achieve high speed cutting tool feeding. The linear brushless DC motor is used for satisfying this process work. The ball bush and turicite is used as the guidance of the feed gear system. Also linear encoders, digital servo amplifiers and controller are used for controlling driving motor. This paper presents the design and simulation of the new tool feed system for noncircular machining.

• 한국추진공학회지
• /
• 제24권2호
• /
• pp.83-93
• /
• 2020

압력전달시스템의 주파수응답특성의 효과 때문에 동압센서를 하드웨어에 flush 마운트 형태로 설치해야 한다. 그러나 측정을 위한 포트 주변의 협소한 조건 혹은 고온의 연소가스로부터 센서가 손상되는 것을 막기 위해 벽면 안쪽에 recess 마운트 방식을 설계하기도 한다. 압력전달시스템에서 동압 신호의 왜곡이 발생하기 때문에 동적 응답 특성을 반드시 고려해야 한다. 본 연구에서는 섭동 모델과 2차 축소 모델을 실험치와 비교하였고 주파수응답모델을 선택하기 위한 가이드라인을 제시하였다.

• Tribology and Lubricants
• /
• 제6권1호
• /
• pp.74-81
• /
• 1990

The threshold of instability for a rigid rotor supported in externally pressurized airlubricated circular or non-circular journal bearings of finite length is theoretically analyzed. The analysis is performed for a bearing having one feeding plane, no recess volume, which is assumed to be a line source, and is based on a first order perturbation of journal center motion about steady state position. And then linearized system dynamic analysis is carried out. Numerical results are given, showing the threshold of instability as a function of supply pressure ratio, feeding parameter and load. It is shown that the region that 2-lobe bearing is more stable than circular bearing exists and whirl ratio of 2-lobe bearing is less than that of the other types of bearing.

• Tribology and Lubricants
• /
• 제12권3호
• /
• pp.92-99
• /
• 1996

Energy-efficient contrarotating propeller systems have been recently reviewed as one of alternative means in marine car-carrier applications. Contrarotating rotors preclude the usage of conventional plain journal bearings due to the lack of load carrying capacity. A new multi-recess hydrostatic contrarotating journal beating test facility has been designed and installed to test the static load carrying capacity. Measurements of flow rates and orbits have been investigated by testings on a overhung-type contrarotating rotor system which is supported by a hydrostatic journal bearing. Numerical results of static equilibria were compared with test results. Various contrarotating speed combinations, and supply pressure conditions were selected. The numerical predictions of orbit centers and flow rates are generally accurate.

• 보험의학회지
• /
• 제3권1호
• /
• pp.90-102
• /
• 1986

The gallbladder is a pear-shaped, thin walled sac located on the inferior surface of the liver between the right and quadrate lobe, in a recess called fossa vesicae felleae. It is 7.5cm-12.5 cm in length, 3.5 cm in the largest width, and has a volume of about 45 ml with a remarkable capacity for expansion. There are many kinds of diagnostic methods to evaluate diseases of biliary tract including gallbladder-Plain abdomen, Oral cholecystography. Intravenous cholangiography, Percutaneous transhepatic cholangiography(PTC), Endoscopic retrograde cholangiography(ERCP), Operative or T-tube cholangiography, Ultrasonography, Radioisotope study, Computed tomography, and Angiography. Especially, ultrasonography is the most effective and noninvasive study in these days. Plain abdomen, oral cholecystography, intravenous cholangiography, and ultrasonography have been performed in our clinic. Methods and findings of above mentioned study are discussed with consideration of references.

• 한국조경학회지
• /
• 제22권4호
• /
• pp.177-185
• /
• 1995

To investigate vegetation structure and succession of forest in the Deokyusan National Park, field survey was performed from July to September, 1992 and the results were as follows; The forest vegetation of Deokyusan National Park was classified into four communities by the factor of altitude. The successional trends of tree species by DCA ordination seem to be from Pinus densiflora to Carpinus laxiflora and Betula schmiatii and also, Quercus spp. through Cornus walter and Platycarya strobilacea to Q. mongolica, Abies holophylla and Taxus cuspidata. The diversity indices seemed to be affected by the factors of altitude. Especially, evenness showed several difference according to altitude. Comparing vegetation structure of lower layer for the recess system and one others, more number of species and species diversity were observed.

• 한국항해학회지
• /
• 제23권4호
• /
• pp.105-114
• /
• 1999

Generally, though we use the vision sensor or arc sensor in welding process, it is difficult to define the welding parameters which can be applied to the weld quality control. Especially, the important Parameters is Arc Voltage, Welding Current, Welding Speed in arc welding process and they affect the decision of weld bead shape, the stability of welding process and the decision of weld quality. Therefore, it is difficult to determine the unique relationship between the weld bead geometry and the combination of various welding condition. Due to the various difficulties as mentioned, we intend to use Fuzzy Logic and Neural Network to solve these problems. Therefore, the combination of Fuzzy Logic and Neural network has an effect on removing the weld defects, improving the weld quality and turning the desired weld bead shape. Finally, this system can be used under what kind of welding recess adequately and help us make an estimate of the weld bead shape and remove the weld defects.