• 한국태양에너지학회 논문집
• /
• 제31권2호
• /
• pp.53-62
• /
• 2011

Heliostat in the tower type solar thermal power plant is a sun tracking mirror system to reflect the solar energy to the receiver and the optical performance of it affects to the efficiency of whole power plant most significantly. Thus a proper design of structure of the heliostat reflective surface could be the most important step in the construction of such power plant. The work presented here is a design of structure of optical surface of heliostat, which will be used in 200kW solar thermal power plant. The receiver located at 43(m) high from ground in tower has $2{\times}2$(m) rectangular shape. We first developed the software tool to simulate the energy concentration characteristics of heliostat using the ray tracing technique. Then, the shape of heliostat reflective surface is designed with the consideration of heliostat's energy concentration characteristics, production cost and productivity. The designed heliostat's reflective surface has a structure formed by canting four of $1{\times}1$(m) rectangular flat plate mirror facet and the center of each mirror facet is located on the spherical surface, where the spherical surface is formulated by the mirror facet mounting frame.

• ETRI Journal
• /
• 제37권1호
• /
• pp.43-53
• /
• 2015

In this paper, a selective coefficient updating (SCU) approach at each branch of the per-tone equalization (PTEQ) structure has been applied for insufficient cyclic prefix (CP) length. Because of the high number of adaptive filters and their complex adaption process in the PTEQ structure, SCU has been proposed. Using this method leads to a reduction in the computational complexity, while the performance remains almost unchanged. Moreover, the use of set-membership filtering with variable step size is proposed for a sufficient CP case to increase convergence speed and decrease the average number of calculations. Simulation results show that despite the aforementioned algorithms having similar performance in comparison with conventional algorithms, they are able to reduce the number of calculations necessary. In addition, compensation of both the channel effect and the transmitter/receiver in-phase/quadrature-phase imbalances are achievable by these algorithms.

• Journal of information and communication convergence engineering
• /
• 제9권1호
• /
• pp.27-31
• /
• 2011

This paper describes the optimization of spectrum sensing in terms of the throughput of a cognitive radio (CR) system. Dealing with the optimization problem of spectrum sensing, this paper evaluates the throughput of a CR system by considering such situations as the penalty time of a channel search and incumbent user (IU) detection delay caused by a missed detection of an incumbent signal. Also, this paper suggests a serial channel search scheme as the search method for a vacant channel, and derives its mean channel search time by considering the penalty time due to the false alarm of a vacant channel search. The numerical results suggest the optimum sensing time of the channel search process using the derived mean channel search time of a serial channel search in the case of a sensing hardware structure with single radio frequency (RF) path. It also demonstrates that the average throughput is improved by two separate RF paths in spite of the hardware complexity of an RF receiver.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.185-185
• /
• 2008

This paper describes the broadband SDC (Single-ended to Differential Converter) for Digital Video Broadcasting-Satellite $2^{nd}$ edition (DVB-S2) receiver tuner IC. It is fabricated by using $0.18{\mu}m$ CMOS process. In order to obtain high linearity and low phase mismatch, the broadband SDC (Single-ended to Differential Converter) is designed with current mirror structure and cross-coupled capacitor and current source binding differential structure at VDD. The simulation result of SDC shows IIP3 of 11.9 dBm and IIP2 of 38 dBm. It consumes 5mA current with 2.7V supply voltage.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.546-560
• /
• 2000

This paper describes the design and evaluation of a noise suppressing hydrophone that is robust to external noise without sacrificing its performance as a receiver. To increase robustness of the receiver to the external noise, first, effects of location of external noise on its performance are analyzed with the finite element method (FEM). Based on the results, geometrical variations are implemented on the structure with additional air pockets and damping layers that work as acoustic shields or scatterers of the noise, and fourteen trial models are developed for the noise suppressing hydrophone structures. The results show that the effect of the external noise is most significant when it is applied to near the mid-side surface of the hydrophone housing. The external noise is isolated most efficiently when two thin damping layers combined with five air pockets are inserted to the circumference of the hydrophone housing. Overall, of the fourteen structural variations of the hydrophone, the best one shows about 87% reduction in the response of the original structure to external noise.

• 한국통신학회논문지
• /
• 제19권11호
• /
• pp.2067-2080
• /
• 1994

최근, 디지털 이동 통신 시스템에서, Blind 등기화와 Carrier Recovery의 결합에 관한 관심이 점점 증가하고 있다. 본 논문에서는 변조된 QAM신호를 위한 Blind 등화기와 다양한 Carrier Recovery의 결합한 새로운 수신기를 제시하였다. Godard blind 등화기, Map estimation Costas loop, Generalized Costas loop, Leclert loop, Angular Form loop를 간단히 검토한 후, 등화기와 CR loop의 결합형태를 갖는 두가지 수신기 구조를 제시한다. 몬테 카를로 시뮬레이션 기법을 사용하여, 본 논문에서 제시한 두가지 수신기 구조가 정상상태에서 잘 동작 됨을 확인할 수 있다.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권4호
• /
• pp.165-172
• /
• 2016

A Global Navigation Satellite System (GNSS), which is typically exemplified by the Global Positioning System (GPS), employs a open signal structure so it is vulnerable to spoofing electronic attack using a similar malicious signal with that used in the GPS. It is necessary to require a spoofing test evaluation environment to check the risk of spoofing attack and evaluate the performance of a newly developed anti-spoofing technique against spoofing attacks. The present paper proposed a simulation method of spoofing environment based on simulator that can be implementable in a test room and analyzed the spoofing simulation performance using commercial GPS receivers. The implemented spoofing simulation system ran synchronized two GPS simulator modules in a single scenario to generate both of spoofing and GPS signals simultaneously. Because the signals are generated in radio frequency, a commercial GPS receiver can be tested using this system. Experimental test shows the availability of this system, and anti-spoofing performance of a commercial GPS receiver has been analyzed.

• 전기학회논문지P
• /
• 제65권4호
• /
• pp.316-320
• /
• 2016

This paper proposes an alternate time-switched multiplexed space-frequency block coding technique for single-carrier modulation with frequency domain equalization. The traditional multiplexed space-frequency block coding technique for single-carrier modulation uses multiple groups of two transmitters and suppresses the interference signals of other SFBC groups at the receiver. In this paper, we reconfigure transmit signals to adapt them for alternate time-switched multiplexed SFBC for single-carrier modulation with frequency domain equalization and receiver structures and propose a structure for transmitter and receiver, show that its performance is better than the traditional algorithm by simulations.

• 전기학회논문지P
• /
• 제61권4호
• /
• pp.234-238
• /
• 2012

This paper proposes a multiplexed space-frequency block coding (SFBC) technique for single-carrier modulation with frequency domain equalization. Multiplexed space-frequency block coding technique for single-carrier modulation uses multiple groups of two transmitters and suppresses the interference signals of other SFBC groups at the receiver. In this paper, we reconfigure transmit signals to adapt them for multiplexed SFBC for single-carrier modulation with frequency domain equalization and receiver structures and propose a structure for transmitter and receiver, show its performance is better than the traditional algorithm by simulations.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권4호
• /
• pp.381-388
• /
• 2022

In 2021, development of a regional satellite navigation system called KPS was approved. In this regard, various studies are in progress, but there is no published signal model. So, in relation to the user segment, it is necessary to design a user receiver, but there is no information. Therefore, in this paper, we assume a signal model that can be a candidate signal for KPS based on related studies. This signal uses CNAV-2 structure navigation message, truncated Gold code and BPSK modulation. Based on this signal, a simulator is designed that can be used for receiver design later. The simulator consists of a signal generator and a signal transmitter, and is verified using a software receiver and spectrum analyzer.