• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.115-120
• /
• 2005

A c-band microwave radiometer receiver for river mouth water temperature remote sensing was designed and implemented The developed receiver operated at 5.1GHz frequency with 70MHz bandwidth. It had high gain of 50dB and low noise figure of 2dB. Also we executed efficiency evaluation about detection capability of the receiver with noise source similar input signal. The experiment results showed that the c-band receiver successfully detected the antenna temperature range from 193K to 300K.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.394-397
• /
• 2001

There are several methods of measuring position. For example GPS, AOA, TDOA and using radio camera. In this Paper I used TDOA method in position measuring system. TDOA method uses arrival time difference. In position measuring system, three transfers which is placed in different position transfer signal to receiver in fixed time interval and receiver records arrival time of signal. Because receiver knows idle signal's arrival time, receiver can calculate the difference of the signal's arrival time between idle and real. When we obtain time difference we can know the receiver position by Newton Raphson method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.6
• /
• pp.507-513
• /
• 2002

In this paper, the receiver using Heterodyne type is designed and implemented for a pulse radar at 9.4 GHz. The If amplifier, which occupies a significant size in a Heterodyne receiver for pulse radars, can be removed. Furthermore, by using detector logarithmic video amplifier in baseband, the receiver has a small size and it's characteristic shows a high dynamic range and sensitivity. From the results of measurements, the minimum receiver power of -70 dBm and selectivity of 55 dB are obtained.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.671-672
• /
• 2006

Recently Communication with using IrDA is bing used in various fields. In this paper I designed a receiver by fabricating hardware that used to be fabricated through software, so anyone who don't have knowledge on IrDA can receive Ir Signal easily. This receiver can communicate with CPU through 8 bit data and 3 bit address. Also this receiver can use user-needed CLK because this receiver embodied 16 bit CLK Prescaler.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.123-131
• /
• 2007

This paper developed a FIR-Rake receiver which makes use of a pilot signal broadcast by the TD-SCDMA (division-synchronous code division multiple access) base station to estimate the channel parameters. The FIR-Rake receiver can reduce multipath interference for the mobile stations. The analysis in frequency and discrete domain and computer simulations confirm that the proposed FIR-Rake receiver achieves a better performance under typical multipath fading propagation conditions.

• Journal of electromagnetic engineering and science
• /
• v.8 no.1
• /
• pp.34-39
• /
• 2008

An RF front-end dual-conversion receiver for $3{\sim}5\;GHz$ MB-OFDM UWB systems is implemented in $0.18\;{\mu}m$ CMOS technology. The receiver includes a two-stage UWB LNA, an RF mixer, an IF I/Q mixer, and a frequency synthesizer. The proposed receiver adopts the dual-conversion architecture to mitigate the burden of design of the frequency synthesizer. Accordingly, the proposed frequency synthesizer generates four LO tones from only one VCO. The receiver front-end achieves power gain of 16.3 to 21 dB, NF of 7 to 7.6 dB over $3{\sim}5\;GHz$, and IIP3 of -21 dBm, while consuming 190 mW from a 1.8 V supply.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1638-1642
• /
• 2003

In this paper, we have analyzed the power spectra and evaluate the performance of DTMF receiver by using the quick Fourier transform(QFT) algorithm. The economical signals detection of dual-tone multifrequency(DTMF) receiver is an important factor when developing cost-effective telecommunication equipment. In experimental results, it shows that reducing memory waste and can process the real-time.

• Journal of the Korean Institute of Navigation
• /
• v.22 no.1
• /
• pp.51-54
• /
• 1998

In this paper, RF receiver for CDMA system which has 10 MHz in the channel bandwidth has been designed and fabricated. The designed and fabricated RF receiver is shown useful in operation and the performance has been confirmed by experiments. The results are to be used for establishment of a broadband CDMA wireless access specification standard for WLL system in 2.3 GHz band.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.28-29
• /
• 2004

Optical wireless mobile communications have the potential to provide wide bandwidth and security . We have proposed and designed the 2-dimensional tracking optical receiver systems for optical wireless mobile communication. The receiver system consist of 4${\times}$4 photodiode array can receive optical signal from the transmitter. The room size is 5${\times}$5m$^2$ and the room height is 3m.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.11a
• /
• pp.184-185
• /
• 2002

We discussed the main issues of 10GHz Receiver packaging. High frequency structure simulations and circuit simulations for TO-CANs led to a new design for 10GHz optical receiver module packaging. The simulation results were compared to the measured laboratory data. The proposed package has low cost and easy manufacture process far mass production. Using this package, we had a good optical to electrical conversion (OE) characteristic at a data rate of 10Gbps.