• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1360-1363
• /
• 1996

EPD(End Point Detection) is used to decide etching degree of layer which must be removed at wafer etching process in plasma etching process which is one of the most important process in semiconductor manufacturing. In this thesis, the method which detects malfunction of etching process in real-time will be discussed. Several EPD signal traces are collected in normal plasma etching condition and used as reference EPD signal traces. Critical points can be detected by applying differentiation and zero-crossing techniques to reference EPD signal. Mean and standard deviation of critical parameters which is memorized from reference EPD signal are calculated and these determine the lower and higher limit of control chart. And by applying statical control chart to EPD signals which are collected in real etching process malfunctions of process are detected in real-time. By means of applying this method to the real etching process we prove our method can accurately detect the malfunction of etching process and can compensate disadvantage of current industrial method.

• 제어로봇시스템학회논문지
• /
• 제18권4호
• /
• pp.337-342
• /
• 2012

This paper presents performance evaluation of real-time mechanisms for real-time embedded linux. First, we presents process for implementing open-source real-time embedded linux namely RTAI and Xenomai. These are real-time extensions to linux kernel and we implemented real-time embedded linux over the latest linux kernel. Measurements of executions of real-time mechanisms for each distribution are performed to give a quantitative comparison. Performance evaluations are conducted in kernel space about repeatability of periodic task, response time of Semaphore, FIFO, Mailbox and Message queue in terms of inter-task communication for each distribution. These rules can be helpful for deciding which real-time linux extension should be used with respect to the requirements of the real-time applications.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.171-178
• /
• 2013

Workers are avoiding production/manufacturing sites due to the poor working environment and concern over safety. Small and medium-sized businesses introduce new equipment to secure safety in the production site or ensure effective process management by introducing the real-time monitoring technique for existing equipment. The importance of real-time monitoring of equipment and process in the production site can also be found in the ANSI/ISA-195 model. Note, however, that most production sites still use paper-based work slip as a process management technique. Data reliability may deteriorate because information on the present condition of the production site cannot be collected/analyzed properly due to manual data writing by the worker. This paper introduces the monitoring and process management technique based on a direct facility interface to secure safety in the field by improving the poor working environment and enhance there liability and real-time characteristics of the production data. Since the data is collected from equipment in real-time directly through the SIB-based interface and PLC-based interface, problems associated with workers' manual data input are expected to be solved; safety can also be improved by enhancing workers' attention to work by minimizing workers' injuries and disruption.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.653-657
• /
• 2000

The paper describes the contents and results of the national project named "Development of Computer Integrated Product Design for Automation Equipment". It is focussed on the real-time control '||'&'||' monitoring of manufacturing process for automobile rubber parts. Automobile rubber parts industy is one of the typical process that high11 depends upon manufacturing facilities and equipments. So. it requires high cost and engineering technolog) on plant implementation. But most companies of rubber parts industries are small or mid companies that habe weak abilities for plant implementation properly and systematically. Therefore, for upgrading the levelof automation. it is necessar). to dekelope the computer based management and monitoring slsteni that enables to build-up the common base of automation and systemization. 'Through this project. we developed low cost real-time monitoring system for banbun mixing process '||'&'||' mold injection process of rubbcr parts manufacturing, that is composed with DDCU(Distributed Digital Control Unit),signal interfaces to gathering mon~toring terms and speciall\ developed functional sofhare including some algorithm for management '||'&'||' process monitoring

• 대한원격탐사학회지
• /
• 제26권6호
• /
• pp.629-644
• /
• 2010

A real-time image georeferencing system requires all inputs to be determined in real-time. The intrinsic camera parameters can be identified in advance from a camera calibration process while other control information can be derived instantaneously from real-time GPS/INS data. The bottleneck process is tie point acquisition since manual operations will be definitely obstacles for real-time system while the existing extraction methods are not fast enough. In this paper, we present a fast-and-automated image matching technique based on the KLT tracker to obtain a set of tie-points in real-time. The proposed work accelerates the KLT tracker by supplying the initial guessed tie-points computed using the GPS/INS data. Originally, the KLT only works effectively when the displacement between tie-points is small. To drive an automated solution, this paper suggests an appropriate number of depth levels for multi-resolution tracking under large displacement using the knowledge of uncertainties the GPS/INS data measurements. The experimental results show that our suggested depth levels is promising and the proposed work can obtain tie-points faster than the ordinary KLT by 13% with no less accuracy. This promising result suggests that our proposed algorithm can be effectively integrated into the real-time image georeferencing for further developing a real-time surveillance application.

• 전자공학회논문지B
• /
• 제29B권4호
• /
• pp.12-21
• /
• 1992

Many real-time supporting features are used to execute real-time process in a time-constraints given. In this paper, The real-tiem resources management mechanism based time constraints which order resources supporting real-time processes blocked by the processes was proposed. This mechanism was all implemented and tested on the UNIX operating system.

• Journal of Computing Science and Engineering
• /
• 제9권2호
• /
• pp.108-117
• /
• 2015

Interrupt handling is generally separated from process scheduling. This can lead to a scheduling anomaly and priority inversion. The processor can interrupt a higher priority process that is currently executing, in order to handle a network packet reception interruption on behalf of its intended lower priority receiver process. We propose a new network interrupt handling scheme that combines interrupt handling with process scheduling and the priority of the process. The proposed scheme employs techniques to identify the intended receiver process of an incoming packet at an earlier phase. We implement a prototype system of the proposed scheme on Linux 2.6, and our experiment results show that the prototype system supports the predictable real-time behavior of higher priority processes even when excessive traffic is sent to lower priority processes.

• 조명전기설비학회논문지
• /
• 제29권7호
• /
• pp.28-37
• /
• 2015

Owing to the variability of large-scaled wind power system, the development of wind farm management technologies and related compensation methods have been receiving attention. To provide an accurate and reliable output power, certain wind farm adopts a specified management system including a wind prediction model and grid expectation solutions for considering grid condition. Those technologies are focused on improving the reliability and stability issues of wind farms, which can affect not only nearby system devices but also a voltage condition of utility grid. Therefore, to adapt the develop management system, an expectation process about voltage condition of Point of Common Coupling should be integrated in operating system for responding system requirements in real-time basis. This paper introduce a grid imposing method for a real-time based wind farm management system. The expected power can be transferred to the power flow section and the required quantity about reactive power can be calculated through the proposed system. For the verification process, the gauss-seidel method is introduced in the Matlab/Simulink for analysing power flow condition. The entire simulation process was designed to interwork with PSCAD for verifying real power system condition.

• 한국컴퓨터정보학회논문지
• /
• 제24권11호
• /
• pp.21-27
• /
• 2019

임베디드 시스템에서는 서비스 특성에 따라 정해진 시간 내에 처리해야하는 하드 실시간 시스템과 처리 시간이 더 유연한 유연한 실시간 시스템을 분리해야합니다. 실시간을 동시에 수행하기 위해 운영 체제를 8BIT MCU와 같은 저 성능 임베디드 장치로 이식하는 것은 어렵습니다. RTOS (실시간 OS)를 사양이 낮은 MCU에 포팅하고 여러 작업을 수행 할 때 실시간 및 일반 처리 성능이 크게 저하되어 8BIT MCU와 같은 저 성능 MCU로 포팅 된 운영체제에 하드 실시간 시스템이 필요한 경우 성능 저하로 인해 하드웨어 및 소프트웨어를 다시 설계하는 문제가 발생되고 있습니다. 저성능 MCU에 이식 된 RTOS (저 성능 MCU로 포팅)에서 실시간 처리 시스템 요구 사항을 처리에 대하여 연구하고 프로세스 스케줄링에 대하여 연구가 진행되었습니다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.158-158
• /
• 2000

In this paper, control problems of computer kitchen systems are studied, which are widely used to automate test dyeing processes. To reduce the process time and avoid collision, a simplified real time control scheme Is proposed using Windows 98 environments Using two robots and applying proposed control scheme, the process time was reduced more than 30% for a given recipe in comparison with one robot machine