• Journal of the Korea Society of Computer and Information
• /
• v.25 no.11
• /
• pp.115-122
• /
• 2020

In this paper, we propose an MES system based on real-time process capability management and how to manage the manufacturing process using the system. The current MES system presents a KPI report that makes it easy to recognize the manufacturing site, but has not been able to derive an improvement method to improve the actual manufacturing site KPI. In other words, it is difficult to extract the cause of the increase in defective rate, decrease in yield, and increase in production lead-time, and to draw an improvement plan and apply it to the manufacturing site. The purpose of the MES system based on real-time process capability management proposed in this paper is to establish an manufacturing operation management system that overcomes the limitations of the existing MES by managing the distribution of major factors of the equipment that determines the process capability. In addition, by presenting a speed improvement method for real-time large-capacity data processing, it is intended to be applied so that the system can operate well.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.2
• /
• pp.221-226
• /
• 2007

This paper suggests a valuation framework of investment project using the concept of real options. We show the valuation process of real assets using the risk-neutral pricing. Especially, we focus on the investment lag. Real assets have investment lag in general. The decision time and the payment time are not identical. So the investment lag should be considered when valuing real assets for reality. We provide the valuation process for real assets, including R&D project. The results of this paper can be used for the real assets valuation and strategic decision analysis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.46-51
• /
• 2001

For Fast Real-time Recognition of Nonlinear Error Data, a new Neural Network algorithm which recognized the map in real time is proposed. The proposed neural network technique is the real time computation method through the inter-node diffusion, In the network, a node corresponds to a state in the quantized input space. Each node is composed of a processing unit and fixed weights from its neighbor nodes as well as its input terminal. The most reliable algorithm derived for real time recognition of map, is a dynamic programming based algorithm based on sequence matching techniques that would process the data as it arrives and could therefore provide continuously updated neighbor information estimates. Through several simulation experiments, real time reconstruction of the nonlinear map information is processed,

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.46-51
• /
• 2001

For Fast Real-time Recognition of Nonlinear Error Data, a new Neural Network algorithm which recognized the map in real time is proposed. The proposed neural network technique is the real time computation method through the inter-node diffusion. In the network, a node corresponds to a state in the quantized input space. Each node is composed of a processing unit and fixed weights from its neighbor nodes as well as its input terminal. The most reliable algorithm derived for real time recognition of map, is a dynamic programming based algorithm based on sequence matching techniques that would process the data as it arrives and could therefore provide continuously updated neighbor information estimates. Through several simulation experiments, real time reconstruction of the nonlinear map information is processed.

• Proceedings of the KWS Conference
• /
• 1995.10a
• /
• pp.3-20
• /
• 1995

Development of Real-Time Quality Evaluation of Friction Welding by Acousitc Emission : Report 1 ABSTRACT : According as the friction welding has been increasingly applied in manufacturing various machine components because of its significant economic and technical advantages, one of the important concerns is the reliable quality monitoring method for a good weld quality with both joint strength and toughness in the process of its production. However no reliable nondestructive test method is available at present to determine the weld quality particularly in process of production. So this paper presents an experimental examination and quantitative analysis for the real-time evaluation of friction weld quality by acoustic emission, as a new approach which attempts finally to develop an on-line quality monitoring system design for friction welds using AE techniques. As one of the important results, it was confirmed, through this study, that AE techniques can be reliably applied to evaluating the friction weld qualify with 100% joint strength, as the cumulative AE counts occurring during welding period were quantitatively correlated with reliability at 95% confidence level to the joint strength of welds. Real-Time Evaluation of Automatic Production Quality Control for Friction Welding Machine : Report 2 Abstract : Both in-process quality control and high reliability of the weld is one of the major concerns in applying friction welding to the economical and qualified mass-production. No reliable nondestructive monitoring method is available at present to determine the real-time evaluation of automatic production quality control for friction welding machine. This paper, so that, presents the experimental examinations and statistical quantitative analysis of the correlation between the initial cumulative counts of acoustic emission(AE) occurring during plastic deformation period of the welding and the tensile strength of the welded joints as well as the various welding variables, as a new approach which attempts finally to develop an on-line (or real-time) quality monitoring system and a program for the process of real-time friction welding quality evaluation by initial AE cumulative counts. As one of the important results, it was well confirmed that the initial AE cumulative counts were quantitatively and cubically correlated with reliability of 95% confidence level to the joint strength of the welds, bar-to-bar (SCM4 to SUM31, SCM4 to SUM24L) and that an AE technique using initial AE counts can be reliably applied to real-time strength evaluation of the welded joints, and that such a program of the system was well developed resulting in practical possibility of real-time quality control more than 100% joint efficiency showing good weld with no micro-structural defects.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.6
• /
• pp.1753-1765
• /
• 2000

As the areas of computer application are expanded, real-time application environments that must process as many transactions as possible within their deadlines, such as a stock transaction systems, ATM switching systems etc, have been increased recently. The reason why the conventional database systems can't process soft real-time applications is the lack of prediction and poor performance on processing transaction's deadline. If transactions want to access data stored at the secondary storage, they can not satisfy requirements of real-time applications because of the disk delay time. This paper designs a main-memory database prototype systems to be suitable to real-time applications and then this system can produce rapid results without disk i/o as all of the information are loaded in main memory database. In thesis proposed the improved techniques with respect to logging, checkpointing, and recovering in our environment. In order to improve the performance of the system, a) the frequency of log analysis and redo processing is reduced by the proposed redo technique at system failure, b) database consistency is maintained by improved fuzzy checkpointing. The performance model is proposed which consists of two parts. The first part evaluates log processing time for recovery and compares with other research activities. The second part examines checkpointing behavior.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.350-353
• /
• 2004

The increasing use of Ethernet-TCP/IP network in industry has led to the growing interest in its reliability in real-time applications such as automated manufacturing systems and process control systems. However, stochastic behavior of its medium access scheme makes it inadequate for time-critical applications. In order to guarantee hard real-time communication service in Ethernet-TCP/IP network, we proposed an algorithm running over TCP/IP protocol stack without modification of protocols. In this paper, we consider communication services guaranteeing deadlines of periodic real-time messages over MAC protocols that have unbounded medium access time. We propose a centralized token scheduling scheme for multiple access networks. The token is used to allow a station to transmit its message during the time amount that is appended to the token. The real-time performance of the proposed algorithm has been described.

• Journal of Korea Game Society
• /
• v.5 no.2
• /
• pp.3-9
• /
• 2005

Interactive real-time 3D enables users to explore virtual three dimensional environments and also experience contents in an absorbing fashion. Unlike other media, Interactive real-time 3D users take an active role in the process of "real-time fashion" where action and reaction occur instantly in a digital 3D structure. Once the components and origins of interactive real-time 3D is made, it is possible making principles of the beauty that help decide success or failure of real-time 3D in two way system. Substantial real-time 3D has not yet passed 10 years so it was unable to make sufficient precedents of fundamental artistic value based upon the credibility of the media. The goal is to explain the new form of design in relation to general principles of arts at the same time to understand the technical definition better. Concepts of historical documentation are explained with an example of categorization of recent video game and recent technology. This thesis concludes with rough forecast on the future interactive real time 3D. Since the medium began relatively recently and is developing in the rapid pace, recent analyses, though clear forecast is difficult, tend to investigate potential directions to some level the field allows.

• Journal of Welding and Joining
• /
• v.33 no.4
• /
• pp.24-29
• /
• 2015

The current waveform was analysed to monitor the weld quality in real time process. The acquired current waveform was discretely analysed for the top and bottom limits of peaks as well as the pulse frequency measurement. Fast Fourier Transform was implemented in the program to monitor the pulse frequency in real time. The developed algorithm or program was tested for the validation purpose. The cross-section of weld profile was compared to the current waveform profile to correlate the monitored signal and the actual parts. Pulse frequency was also used as auxiliary tool for the quality monitoring. Based on the results, it was possible to evaluate the quality of welding by measure the current waveform profile and frequency measurement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1365-1376
• /
• 1997

In this paper, we designed real time mechanism control language and proposed execution time analysis technique. It was impossible to handle real-time mechanism control programs like programmable controller, numerical controller, distributed control system and robot controller with general purpose programming languages and operating systems because they have to process electric signals generated by thousands of sensors at the same at the same time and in real time. So we made it possible to predict plausibility of time constraint constructs of tiem constraint construct of a real time application program at compilation time by adding time constraint constructs and mechanism synchronization structure to conditional statement and iteration statement of a programming language and developing execution time analysis technique.