• Atmosphere
• /
• v.18 no.4
• /
• pp.267-277
• /
• 2008

The occurrence and strength of the Asian Dust over the Korea Peninsular have been increased by the expansion of the desert area. For the continuous monitoring of the Asian Dust event, the geostationary satellites provide useful information by detecting the outbreak of the event as well as the long-range transportation of dust. The Infrared Optical Depth Index (IODI) derived from the MTSAT-1R data, indicating a quantitative index of the dust intensity, has been produced in real-time at Korea Meteorological Administration (KMA) since spring of 2007 for the forecast of Asian dust. The data processing algorithm for IODI consists of mainly two steps. The first step is to detect dust area by using brightness temperature difference between two thermal window channels which are influenced with different extinction coefficients by dust. Here we use dynamic threshold values based on the change of surface temperature. In the second step, the IODI is calculated using the ratio between current IR1 brightness temperature and the maximum brightness temperature of the last 10 days which we assume the clear sky. Validation with AOD retrieved from MODIS shows a good agreement over the ocean. Comparison of IODI with the ground based PM10 observation network in Korea shows distinct characteristics depending on the altitude of dust layer estimated from the Lidar data. In the case that the altitude of dust layer is relatively high, the intensity of IODI is larger than that of PM10. On the other hand, when the altitude of dust layer is lower, IODI seems to be relatively small comparing with PM10 measurement.

• Journal of Korea Game Society
• /
• v.10 no.1
• /
• pp.147-156
• /
• 2010

In this paper, we propose 3D cloud animation by cloud modeling method of 2D images retrieved from a meteorological satellite. First, on the satellite images, we locate numerous control points to perform thin-plate spline warping analysis between consecutive frames for the modeling of cloud motion. In addition, the spectrum channels of visible and infrared wavelengths are used to determine the amount and altitude of clouds for 3D cloud image reconstruction. Pre-integrated volume rendering method is used to achieve seamless inter-laminar shades in real-time using small number of slices of the volume data. The proposed method could successfully construct continuously moving 3D clouds from 2D satellite images at an acceptable speed and image quality.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.791-793
• /
• 2015

Recently, UCC (User Created Contents) and VoD (Video on Demand), and multimedia content are growing, IP-TV, Smart TV, OHTV (Open Hybrid TV) various services such as multi platform (Multi-platform) environment, services and QoS issues. To solve this problem, the network efficiently, and improve the quality of content is necessary for the system. In this paper, the network of channels State and transmission of multimedia data based on dynamic resource usage, TCP and UDP, Adaptive dual-streaming system used for design and analysis. In addition, the existing TCP and UDP streaming system using a single protocol for analysis and verification of the effectiveness of the difference between and. This is a disaster, and medical/first aid system will be utilized in the field of feed, are ubiquitous.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.6 s.360
• /
• pp.31-39
• /
• 2007

In this paper, a system for real-time or periodic measurement and analysis of RF parameters such as forward transmit power and pilot power in CDMA base station systems is proposed. Such RF characteristic parameter measurement can be prevented from system fault and used to achieve optimal service quality and maximum investment return through cell coverage expansion, subscriber capacity increase and so on. For forward power measurement, the local oscillator frequency for the detector is varied so that the transmit power for all channels can be measured. The channel power measurement can be used to analyze the variation in transmit power for changes in voice traffic. By comparing to forward $E_c/I_o$, the pilot channel power can be deducted, which can be used to determine uy degradation in transmit section modules such as the high dover amplifier. Since an accurate analysis of carefully measured data using the CDMA level detector must be made, the system is designed so that measurement errors due to changes in crest factor with modulation method can be overcome.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.8
• /
• pp.1854-1863
• /
• 2003

In the recent digital communication systems, the performance of Turbo Code using the mr correction coding depends on the interleaver influencing the free distance determination and the recursive decoding algorithms that is executed in the huh decoder. However, performance depends on the interleaver depth that needs many delays over the reception process. Moreover, turbo code has been blown as the robust coding methods with the confidence over the fading channel. International Telecommunication Union(ITU) has recently adopted it as the standardization of the channel coding over the third generation mobile communications(IMT­2000). Therefore, in this paper, we preposed the interleaver that has the better performance than existing block interleaver, and modified turbo decoder that has the parallel concatenated structure using MAP algorithm. In the real­time voice and video service over third generation mobile communications, the performance of the proposed two methods was analyzed and compared with the existing methods by computer simulation in terms of reduced decoding delay using the variable decoding method over AWGN and fading channels for CDMA environments.

• Journal of Sensor Science and Technology
• /
• v.20 no.2
• /
• pp.137-144
• /
• 2011

Wireless sensor network(WSN) has the potential to greatly effect many aspects of u-healthcare. By outfitting the potential with WSN, wearable sensor node can collects real-time data on physiological status and transmits through base station to server PC. However, there is a significant gap between WSN and healthcare. WSN has the limited resource about computing capability and data transmission according to bio-sensor sampling rates and channels to apply healthcare system. If a wearable node transmits ECG and accelerometer data of 4 channel sampled at 100 Hz, these data may occur high loss packets for transmitting human activity and ECG to server PC. Therefore current wearable sensor nodes have to solve above mentioned problems to be suited for u-healthcare system. Most WSN based activity and ECG monitoring system have been implemented some algorithms which are applied for signal vector magnitude(SVM) algorithm and ECG noise algorithm in server PC. In this paper, A wearable sensor node using integrated ECG and 3-axial accelerometer based on wireless sensor network is designed and developed. It can form multi-hop network with relay nodes to extend network range in WSN. Our wearable nodes can transmit 1-channel activity data processed activity classification data vector using SVM algorithm to 3-channel accelerometer data. ECG signals are contaminated with high frequency noise such as power line interference and muscle artifact. Our wearable sensor nodes can remove high frequency noise to clear original ECG signal for healthcare monitoring.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.2
• /
• pp.695-712
• /
• 2021

As the use of smart devices is being increased rapidly by the development of internet and IT technology, the contents production and utilization rate are showing higher increase, too. In addition, the type of contents also shows very diverse forms such as education, game, video, UCC, etc. In the meantime, the contents are reproduced in diverse forms by reprocessing the original contents, and they are being serviced through the contents service platform. Therefore, the platform to make the contents reprocessing easy and fast is needed. As the diverse contents distribution channels such as YouTube, SNS, App Service, etc, easier contents distribution platform is needed, and the development of the relevant area is expected. In addition, as the selective consumption of the contents having easy accessibility through diverse smart devices is distinguished, the demand for the platform and service that can identify the contents consumption propensity by individual is being increased. Therefore, in this study, to vitalize the online contents distribution, the contents reproduction and publishing platform, was designed and materialized, which can reproduce and distribute the contents based on the real-time contents editing technology in URL unit and the consumer propensity analysis technology using the data management-based broadcasting contents distribution metadata technology and the edited image contents streaming technology. In addition, in the results of comparing with other platforms through the experiment, the performance superiority of the suggested platform was verified. If the suggested platform is applied to the areas of education, broadcasting, press, etc, the multi-media contents can be reproduced and distributed easily, through which the vitalization of contents-related industry is expected.

• Journal of Digital Convergence
• /
• v.17 no.2
• /
• pp.155-161
• /
• 2019

Electroencephalography (EEG), a representative method of identifying temporal and spatial changes in brain activity, is a voluntary electrical activity measurable in the human scalp. Various interface technologies have been provided to control EEG activity, and it is possible to operate a machine such as a wheelchair or a robot through brainwaves. The characteristics of EEG data are collected in various types of channels in real time, and a server system for analyzing them is required to have an independent and lightweight system for the platform. In these days, the Spring platform is used as a large business server as an independent, lightweight server system. In this paper, we propose an EEG analysis system using the Spring server system. Using the proposed system, the reliability of EEG control can be enhanced, and analysis and control interface expansion can be provided in various aspects such as game and medical areas.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1263-1268
• /
• 2018

In this paper, a video analysis is proposed to implement video surveillance system with deep learning object detection and probabilistic data association filter for tracking multiple objects, and suggests its implementation using GPU. The proposed video analysis technique involves object detection and object tracking sequentially. The deep learning network architecture uses ResNet for object detection and applies probabilistic data association filter for multiple objects tracking. The proposed video analysis technique can be used to detect intruders illegally trespassing any restricted area or to count the number of people entering a specified area. As a results of simulations and experiments, 48 channels of videos can be analyzed at a speed of about 27 fps and real-time video analysis is possible through RTSP protocol.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.12
• /
• pp.1005-1012
• /
• 2020

Avionics systems that use the PCI-Express bus unfortunately cannot use at least one I/O device if the bus fails, because the I/O device is connected to CPU through only one PCI-Express channel. This paper presents a fault-tolerant architecture of the PCI-Express bus for avionics systems, which tolerates one channel failure with help of the other redundant channel that has not been failed. In this architecture, each redundant PCI-Express channel connects a corresponding port of CPU to each switch logic of channels to provide each I/O device through a switched fault-tolerant channel. This paper includes the results of experimentation to show that the architecture detects the faulty condition in real time and switches the channel to the other redundant channel which has not been failed, when the architecture meets a failure.