• Transactions of Materials Processing
• /
• v.19 no.7
• /
• pp.435-440
• /
• 2010

The creep life of 9Cr1MoVNb steel, in terms of Larson-Miller parameter(LMP), was evaluated by small punch(SP) creep simulation and verified by uniaxial creep test. By employing the elastoplastic FEM(finite element method), the small punch creep behaviors associated with various friction coefficients were simulated to identify a real friction phenomena. The friction coefficient, ${\mu}$=0.7, determined by comparing deflection history was used in the small punch creep simulation to find the equivalent stresses with which the relationship between punch load and uniaxial creep stress was found. The creep life was then predicted by the LMP, which was the relationship among the rupture time, temperature, and stress. Finally, the LMP calculated by SP-creep simulation was compared with that had computed by the uniaxial creep test and fairly matched LMPs were found.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.2
• /
• pp.35-44
• /
• 2003

A system reliability method is proposed to decide reliable serviceability of agricultural irrigation system. Even though reliability method is applied to real engineering situations involving actual life environments and maintaining costs, a number of Issues arise as a modeling and analysis level. This article use concepts that can be described the probability of failure with time variant and series-parallel system reliability analysis model. A proposed method use survivor function that can simulate a time-variant performance function for a lifetime before it is required essential maintenance or replacement to define a target probability of failure in agricultural irrigation canal. In the further study, it is required a relationship between a state of probability of failure and current serviceability to make the optimum repair strategy to maintain appropriate serviceability of an irrigation system.

• International Journal of Reliability and Applications
• /
• v.15 no.1
• /
• pp.65-76
• /
• 2014

In this article, a new model based on Lomax distribution is introduced. This new model is both useful and practical in areas such as economic, reliability and life testing. Some statistical properties of this model are presented including moments, hazard rate, reversed hazard rate, mean residual life and mean inactivity time functions, among others. It is also shown that the distributions of the new model are ordered with respect to the strongest likelihood ratio ordering. The method of moment and maximum likelihood estimation are used to estimates the unknown parameters. Simulation is utilized to calculate the unknown shape parameter and to study its properties. Finally, to illustrate the concepts, the appropriateness of the new model for real data sets are included.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.1
• /
• pp.93-101
• /
• 2009

The use of the gas turbine for power supply is increasing recently. Accordingly, the operation and maintenance cost of the gas turbine is gradually increasing and the various efforts to cut the cost are needed. For an operation and maintenance cost saving of the gas turbine, reductions of the new purchasing charge and the reproduction repair cost of the hot gas parts are required through more effective operation and life management methods for the hot gas parts. The hot gas parts are the main parts of the gas turbine and they are replaced with the periodic. In this research, efficient operation and life management methods for the hot gas parts were presented with the cases. The methods were analyzed and verified based on real data and the cases for improving a lifetime were utilized in the field.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.108-113
• /
• 2001

In this paper, the real-time prediction of high temperature creep strength and creep strength and creep life for nickel-based superalloy Udimet 720 (high-temperature and high-pressure gas turbine engine materials) was performed on round-bar type specimens under pure load at the temperatures of 538, 649 and 704$^{\circ}C$. The predictive equation of ISM creep has better reliability than that of LMP and LMP-ISM, and its reliability is getting better for long time creep prediction(10$^3$~10sup/5/ｈ).

• International Journal of Reliability and Applications
• /
• v.5 no.4
• /
• pp.105-113
• /
• 2004

The exponential better (worse) than used EBU (EWU) class of life distributions is considered. A moment inequality is derived for EBU (EWU) distributions which demonstrate that if the mean life is finite, then all moments exist. Based on this inequality, a new test statistic for testing exponentiality against EBU (EWU) is introduced. It is shown that the proposed test is simple, enjoys good power and has high relative efficiency for some commonly used alternatives. Critical values are tabulated for sample sizes n = 5(1)40. A set of real data is used as a practical application of the proposed test in the medical science.

• International Journal of Reliability and Applications
• /
• v.14 no.1
• /
• pp.27-39
• /
• 2013

In this article, a new model based on the Rayleigh distribution is introduced. This model is useful and practical in physics, reliability, and life testing. The statistical and reliability properties of this model are presented, including moments, the hazard rate, the reversed hazard rate, and mean residual life functions, among others. In addition, it is shown that the distributions of the new model are ordered regarding the strongest likelihood ratio ordering. Four estimating methods, namely, method of moment, maximum likelihood method, Bayes estimation, and uniformly minimum variance unbiased, are used to estimate the parameters of this model. Simulation is used to calculate the estimates and to study their properties. Finally, the appropriateness of this model for real data sets is shown by using the chi-square goodness of fit test and the Kolmogorov-Smirnov statistic.

• Journal of Aerospace System Engineering
• /
• v.8 no.4
• /
• pp.7-17
• /
• 2014

Objective of this paper is to introduce a new technology known as prognostics and health management (PHM) which enables a real-time life prediction for safety critical systems under extreme loading conditions. In the PHM, Bayesian framework is employed to account for uncertainties and probabilities arising in the overall process including condition monitoring, fault severity estimation and failure predictions. Three applications - aircraft fuselage crack, gearbox spall and battery capacity degradation are taken to illustrate the approach, in which the life is predicted and validated by end-of-life results. The PHM technology may allow new maintenance strategy that achieves higher degree of safety while reducing the cost in effective manner.

• Tribology and Lubricants
• /
• v.21 no.3
• /
• pp.130-135
• /
• 2005

Dry sliding wear resistance of DLC coated silicon disk with different surface roughness has been evaluated using a ball-on-disk sliding tester. It was found that the transfer layer formed on steel ball produced a low friction regime and the formation of transfer layer was more active with increasing the substrate surface roughness. Wear life of DLC coating was increased as increasing the real area of contact.

• Journal of Korea Multimedia Society
• /
• v.11 no.6
• /
• pp.891-902
• /
• 2008

The software once developed enters in to the $2^{nd}$ phase of its useful operational life, where it performs its functions for which it has been developed. This is an important phase of software life, wherein the developers and users have to assess the performance of the software to prolong its operational life with efficiency, effectiveness and economy. Performance of the software is based on the measurement of the quality characteristics to ascertain that it is meeting or exceeding the needs of customers in terms of its functionality, usability, efficiency, reliability, availability, maintainability, portability etc. These software quality attributes defined under ISO 9126 provide an overall good framework for assessing the performance of the software. This paper describes a Software Performance Assessment (SPA) model using the Goal-Question-Metric (GQM) paradigm which has been applied to the operational software in real context with successful results.