• 한국기계가공학회지
• /
• 제12권1호
• /
• pp.15-21
• /
• 2013

The safety and stability of 5MW class offshore wind turbine Jack-up platform was investigated through ocean basin experiment. For simulating the environmental condition of yellow sea in the South Korea, diverse waves, winds and currents were performed based on Froude's number. Regular wave and irregular wave based on Froude's number were applied to the wind turbine structure. In experiments, the height and period of regular wave type were scaled down as the 1:50 ratio of real wave condition. Irregular wave type was simulated with TMA(Texel Storm, Marsen and Arsloe)spectrum. The vertical reaction force, resonance period and wave pressure applied to multi-supporters of wind offshore structure were measured experimentally. Finally, the results showed that the capsizing situation of the offshore structure was generated by the severe environmental condition.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.629-633
• /
• 2006

We investigated a new longitudinal acceleration wave decomposition method in time domain. The proposed method separates up- and down-stream waves with an axial strain and axial acceleration measured at a single point on the transmission path. The advantages such as low computation load and easy implementation would be possible by developing time domain under the following assumptions; low frequency range, uniform cross sectional area and elastic wave propagation. We confirmed the feasibility and performance of the method through experiment using Split Hopkinson Pressure Bar (SHPB). The method can be effective in several applications, including active vibration control with wave view point, where real time wave decomposition is necessary.

• 한국전기전자재료학회논문지
• /
• 제29권5호
• /
• pp.284-288
• /
• 2016

Among the various physiological information that could be obtained from human body, heartbeat rate is a commonly used vital sign in the clinical milieu. Photoplethysography (PPG) sensor is incorporated into many wearable healthcare devices because of its advantages such as simplicity of hardware structure and low-cost. However, healthcare device employing PPG sensor has been issued in susceptibility of light and motion artifact. In this paper, to develop the real-time heart rate measurement device that is less sensitive to the external noises, we have fabricated an ultra-small wireless LC resonant pressure sensor by MEMS process. After performance evaluation in linearity and repeatability of the MEMS pressure sensor, heartbeat waveform and rate on radial artery were obtained by using resonant frequency-pressure conversion method. The measured data using the proposed heartbeat rate measurement system was validated by comparing it with the data of an commercialized heart rate measurement device. Result of the proposed device was agreed well to that of the commercialized device. The obtained real time heartbeat wave and rate were displayed on personal mobile system by bluetooth communication.

• Composites Research
• /
• 제16권6호
• /
• pp.56-61
• /
• 2003

In this Paper, a fiber Bragg grating(FBG) sensor system is described and FBGs are well-suited for long term and extremely severe experiments, where traditional strain gauges fail. In the system. a reflect wave-length measurement method which employs a tunable light source to find out the center wave-length of FBG sensor is used. We apply the FBG system to nuclear energy Power Plant for structural integrity test to measure the displacement of the structure under designed pressure and to check the elasticity of the structure by measuring the residual strain. The system works very well and it is expected that it can be used for a real-time strain, temperature and vibration detector of smart structure.

• 한국해안해양공학회지
• /
• 제11권3호
• /
• pp.141-148
• /
• 1999

圓形 파일에 작용하는 卷波性 碎波力은 쇄파제원과 동일한 正弦波를를 대상으로 한 모리슨식의 계산치보다 그 크기는 월등 크나 보통 백분의 수초 이내의 매우 짧은 시간 동안 작용한다. 따라서, 碎波力을 받는 파일의 설계에서 파일의 變位를 정확히 결정하기 위해서는 쇄파력 작용에 의한 動的擧動을 해석하여야 한다. 이를 위해서는 파일 延長上 쇄파력의 시게열에 대한 事前정보가 필요하며, 이는 파일 주변의 碎波壓 시계열로부터 간접적으로 추정할 수 있다. 본 연구에서는 卷波性 碎波의 작용에 따른 쇄파압의 특성을 정량적으로 고찰하기 위하여 實海域에 설치되어 잇는 원형파일에 波壓計를 부착하여 쇄파압을 관측하고 그 결과를 제시하였다.

• International Journal of Railway
• /
• 제1권4호
• /
• pp.169-174
• /
• 2008

Experimental study has been conducted to clarify the internal and external pressure variation characteristics for KTX(Korea Train eXpress) passing through tunnel. Abrupt pressure variation gives rise to the ear-discomfort for passenger and fatigue for car body. In this study, the internal and external pressure variation are measured by using KTX real train experiment and on-board portable data acquisition system in Gyeongbu high speed commercial line. The tunnels from 200 m to 4000 m in length are chosen for the investigation of tunnel length effects. From the results of experiment, the internal pressure variation rate for all the test tunnels is lower than the standard criteria of 200 Pa/s. And, the critical tunnel lengths for pressure wave pattern are classified into 7 groups by using the theoretical L-t diagram analysis.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권4호
• /
• pp.233-239
• /
• 2000

There are many difficult problems in analyzing the gas flow in puffer type circuit breaker such as complex geometry, moving boundary, shock wave and so on. To predict the interruption performance accurately, these should be considered in the simulation. In this paper, the analysis procedure of the cold gas flow in the circuit breaker is presented. Euler equation is solved by FVFLIC method which is an explicit time difference scheme for an unsteady flow computation. Moving boundaries are treated with a cell elimination-addition technique. The pressure and density in front of piston are calculated from the rate of the cell volume change. The presented method is applied to the real circuit breaker model and the pressure in front of the piston is good agreement with the experimental one.

• 한국전자통신학회논문지
• /
• 제12권1호
• /
• pp.93-100
• /
• 2017

자동차 엔진은 연료 주입, 압축, 폭발, 배기 등의 4행정의 내연기관을 탑재하고 있으며 압축압력, 점화불꽃 및 혼합비의 조건이 맞아야 기동이 유지된다. 실린더의 기밀과 관련된 압축행정과 폭발행정에서 압축압력이 정상적으로 유지되지 않으면 엔진의 정상적인 기동을 보장할 수 없다. 본 연구에서는 크랭크인 시(시동거는 시간)에 배터리에서 시동모터에 공급되는 전류파형의 분석을 통해 각 실린더 내의 상대 압축압력의 상태를 판단하는 장치의 개발에 대하여 기술한다.

• 대한토목학회논문집
• /
• 제32권5B호
• /
• pp.295-300
• /
• 2012

본 연구에서는 경계요소법을 이용하여 경사입사파에 따른 잠제형상변화에 의한 잠제 주변 반사율에 대해서 수치해석을 하였다. 해석기법으로는 유체와 투과성 구조물 영역을 동시에 해석할 수 있는 파압함수를 사용하였으며, 파랑의 운동은 선형소산계수와 부가질량계수를 도입하여 정식화 하였다. 기존의 경사입사파에 대한 수치해석 결과와 비교하였을 때 본 수치해석에서 얻어진 결과들은 좋은 일치를 보여 주었다. 반사율은 잠제의 폭이 넓을수록 극대값 및 극소값의 출현 간격이 좁아지고, 장주기 쪽으로 갈수록 커지는 것을 알 수 있었다. 또한, 잠제의 폭에 비해 잠제높이의 변화가 반사율에 더 큰 영향을 주는 것을 알 수 있었다. 각 형상잠제의 소파특성은 경사입사각의 변화에 대한 의존도가 높은 것을 알 수 있었다. 그럼으로, 본 연구의 결과는 실제 해역에서 경사를 가지고 입사하는 파랑에 대한 보다 정확한 수치해석기법으로 이용될 것으로 판단된다.

• 한국소음진동공학회논문집
• /
• 제24권9호
• /
• pp.695-705
• /
• 2014

In this paper, two types of techniques for the prediction of radiated sound pressure due to vibration of a structure are investigated. The prediction performance using wave-number sensing technique is compared to that of conventional prediction method, such as Rayleigh's integral method, for the prediction of far-field radiated sound pressure. For a coupled plate, wave-number components are predicted by the vibration response of plate and the prediction performance of far-field sound is verified. In addition, the applicability of distributed sensors that are not allowable to Rayleigh's integral method is considered and these can replace point sensors. Experimental implementation verified the prediction accuracy of far-field sound radiation by the wave-number sensing technique. Prediction results from the technique are as good as those of Rayleigh's integral method and with distributed sensors, more reduced computation time is expected. To predict the radiated sound by the efficient configuration of structural sensors, composed(synthesized) mode considering sound power contribution is determined and from this size and location of sensors are chosen. Four types of sensor configuration are suggested, simulated and compared.