• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.472-477
• /
• 1996

This paper presents a new approachtothe design of adaptive control system using DSPs(TMS320C30) for robotic manipulators to achieve trajectory tracking by the joint angles. Digital signal processors are used in implementing real time adaptive control algorithms to provide an enhanced motion control for robotic manipulators. In the proposed control scheme, adaptation laws are derived from the improved Lyapunov second stability analysis method based on the adaptive model reference control theory. The adaptive controller consists of an adaaptive feedforward controller, feedback controller, and PID type time-varying auxillary control elements. The prpposed adaptive control scheme is simple in structure, fast in computation, and suitable for implementation of real-time control. Moreover, this scheme does not require an accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the adaptive controller is illustrated by simulation and experimental results for a SCARA robot.

• 한국CDE학회논문집
• /
• 제15권2호
• /
• pp.136-143
• /
• 2010

Realistic Modeling is to maximize the reality of the environment in which perception is made by virtual environment or remote control using two or more senses of human. Especially, the field of haptic rendering, which provides reality through interaction of visual and tactual sense in realistic model, has brought attention. Haptic rendering calculates the force caused by model deformation during interaction with a virtual model and returns it to the user. Deformable model in the haptic rendering has more complexity than a rigid body because the deformation is calculated inside as well as the outside the model. For this model, Gibson suggested the 3D ChainMail algorithm using volumetric data. However, in case of the deformable model with non-homogeneous materials, there were some discordances between visual and tactual sense information when calculating the force-feedback in real time. Therefore, we propose an algorithm for the Volume Haptic Rendering of non-homogeneous deformable object that reflects the force-feedback consistently in real time, depending on visual information (the amount of deformation), without any post-processing.

• 스마트미디어저널
• /
• 제1권4호
• /
• pp.8-17
• /
• 2012

본 논문에서는 모바일 기기에서 사용자 경험의 향상을 위해 다중 진동신호를 활용하는 연구로, 포항공과대학교 햅틱스 및 가상현실 연구실의 '다중 진동자를 사용한 촉각 흐름'과 '실시간 이중 채널 촉감 음악 재생기'의 연구 현황을 소개한다. '다중 진동자를 사용한 촉각 흐름'은 여러 개의 진동자를 사용하여 흐르는 듯한 진동을 생성함으로써 다수의 구분 가능한 진동 신호를 제공할 수 있으며 이를 통한 정보 전달력의 향상을 도모할 수 있다. '실시간 이중 채널 촉감 음악 재생기'는 음악적 신호를 진동 신호로 변환하여 제공함으로써 사용자들로 하여금 더 나은 경험을 제공할 수 있다. 이러한 사례들은 향후 예상되는 모바일 기기에서의 더 많은 정보 전달과 더 나은 사용자 경험에 대한 요구를 충족시키기 위한 좋은 예가 될 수 있을 것으로 기대된다.

• ETRI Journal
• /
• 제43권3호
• /
• pp.389-399
• /
• 2021

In this paper, we propose one-bit feedback-based distributed beamforming (DBF) techniques for simultaneous wireless information and power transfer in interference channels where the information transfer and power transfer networks coexist in the same frequency spectrum band. In a power transfer network, multiple distributed energy transmission nodes transmit their energy signals to a single energy receiving node capable of harvesting wireless radio frequency energy. Here, by considering the Internet-of-Things sensor network, the energy harvesting/information decoding receivers (ERx/IRx) can report their status (which may include the received signal strength, interference, and channel state information) through one-bit feedback channels. To maximize the amount of energy transferred to the ERx and simultaneously minimize the interference to the IRx, we developed a DBF technique based on one-bit feedback from the ERx/IRx without sharing the information among distributed transmit nodes. Finally, the proposed DBF algorithm in the interference channel is verified through the simulations and also implemented in real time by using GNU radio and universal software radio peripheral.

• 한국멀티미디어학회논문지
• /
• 제24권1호
• /
• pp.95-105
• /
• 2021

In the case of laptops and tablet PC's that replace desktop, it uses the Windows operating system to provide various functions depending on operating system dependency, the Windows operating system does not support real-time processing because it uses multi-level feedback queue scheduling that extends round-robin scheduling. Also, since the initial value of Local APIC Counter can not be obtained from the Windows 8, the real-time processing function provided through the existing RTiK does not work. In this paper, we calculate Local APIC Counter value by using MSR_FSB_FREQ register to support real-time processing function on tablet PC's. We designed and implemented RTiK+, which provides real-time processing function to guarantee the periodicity by calculating the operation time of accurate timer. In order to verify and evaluate the performance of the implemented the RTiK+, the period was measured by using the Read Time-Stamp Counter(RDTSC) instruction and it was confirmed that it operates normally at 1ms and 0.1ms period.

• 한국공작기계학회논문집
• /
• 제16권4호
• /
• pp.71-78
• /
• 2007

Input shaping is known to be a very effective tool for suppressing residual vibration without introducing any complicated sensors and feedback control. Real-time input shaping schemes necessitate a process such that the input command is discretized to deal with non-prescribed, real-time input. Thus parameters associated with input command discretization, such as time spacing and duration time, are unknowns which affect the performance of input shaping schemes, especially for small and fast XY stages. This paper investigates the effects of input command discretization parameters, such as time spacing and duration time, on the dynamic performance of XY stages subjected to real-time input shaping. An experimental system is developed which is equipped with an XY stage driven by servo-motors and real-time user command. Experiments are performed to investigate the dynamic performance of XY stage by changing these parameters and to yield a strategy to gain better performance.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권10호
• /
• pp.1327-1334
• /
• 1999

The stabilization control of ball-beam system is difficult because of its nonlinearity and structural unstability. Futhermore, a series of classical methods such as the PID and the full state feedback controller(FSFC) based on the local linearizations have narrow stabilizable regions. At the same time, the fine tunings of their gain parameters are also troublesome. Therefore, in this paper, three improved design techniques of stabilization controller for a ball-beam system were proposed. These parameter tuning methods in the double PID controller(DPIDC), the FSFC and the a sliding mode controller(SMC) were dependent upon the Real Value Elitist Genetic Algorithm (RVEGA). Finally, by applying the DPIDC, the FSFC and the Real Variable Elitist Genetic Algorithm based Sliding Mode Control(RVEGA SMC) to the stabilizations of a ball-beam system, the performances of the RVEGA SMC technique were showed to be superior to those of two other type controllers.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.346-349
• /
• 1996

In this paper development of a CAD of control systems is introduced which enables us to do not only analysis of control systems, design of controllers but also real-time implementation of controllers. By utilizing this software, the control engineer is able to repeat the procedure of modification of controllers and experiments without recompile to attain better performance. The software also offers the facility to update the parameters of controllers without stopping real-time control, which helps on-line tuning of controllers. If some parameters of the controller is changed on-line, the control input may change discontinuously. It has serious effect on the control systems. A method for on-line tuning of state feedback controller with state observer is proposed and verified through the experiment with an inverted pendulum.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.288-291
• /
• 2003

This paper presents an extended Twyman-Green interferometry that enables simultaneous and real-time measurement of 5-DOF motion errors of the translational moving stage. This method uses a null balancing technique in which two plane mirrors are used as target mirrors to generate an interferometric fringe utilizing the optical principles of Twyman-Green interferometry. Fringe is detected by 2D photodiode array for high-speed measurement. Errors are then independently suppressed by activation of piezoelectric actuators through real-time feedback control while the machine axis is moving. Experimental results demonstrate that a machine axis can be controlled with motion errors about 10 nm in linear displacement, 0.15 arcsec in angular displacement

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.112-119
• /
• 2003

This paper presents an extended Twyman-Green interferometry that enables simultaneous and real-time measurement of 5-DOF motion errors of the translational moving stage. This method uses a null balancing technique in which two plane mirrors are used as target mirrors to generate an interferometric fringe utilizing the optical principles of Twyman-Green interferometry. Fringe is detected by 2D photodiode array for high-speed measurement. Errors are then independently suppressed by activation of piezoelectric actuators through real-time feedback control while the machine axis is moving. Experimental results demonstrate that a machine axis can be controlled with motion errors about 10 nm in linear displacement, 0.15 arcsec in angular displacement.