• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7C
• /
• pp.697-705
• /
• 2009

This paper presents the theoretical tag-reading speed in the ASK and the PJM mode of a 13.56MHz RFID system which have been adopted in the international standard ISO 18000-3, along with simulation results to support the mathematical analysis. Through the analysis using the number of tag-dependent Q-algorithm, which was known to give relatively fast reading speed, we not only derive the number of slots to read out given tags, but compare the reading speeds of the ASK with that of the PJM mode. Moreover, we present the numerical comparison of two modes which bring the equivalent results as in the theoretical one.

• MALSORI
• /
• no.66
• /
• pp.1-20
• /
• 2008

The purpose of this study was to investigate the characteristics of fundamental frequency(F0) and amplitude distributions in persons with cerebral palsy(CP) in the reading task. Participants were divided into three groups: 6 persons with spastic CP, 6 persons with athetoid CP and 6 normal persons who are around 15-20 years old. On the results of this study, firstly, in F0 distributions, most of the spastic CPs tended to appear narrow distributions on the basis of mode, but most of the athetoid CPs were opposite, and both of the CP groups tended to distribute highly on lower and higher frequencies than mean and mode. On the other hand, normal persons had a tendency to appear narrow distributions on the basis of mode. Finally, in amplitude distributions, the spastic CPs showed a tendency that there are little differences between the distribution of mode and the others, and most of the athetoid CPs showed a tendency that the distributions of mode were higher than the others. In addition to, the normal persons had a tendency that the distributions of mode were remarkably higher than both of the CP groups.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.70-80
• /
• 2008

This paper presents comparison of 18000-3 ASK and PJM mode RFID in terms of reading speed. This is accomplished by counting the occurrences of a few representative blocks which constitute the reader / tag interactions for each mode. To apply FS (frame slotted)-aloha protocol, four Q-algorithms, which are a Q-algorithm suggested in the standard document, a fixed Q-algorithm, a minimum Q-algorithm and the number of tag dependent Q-algorithm, are used. Through some simulations, we present the reading speed of each mode with respect to the Q-algorithm and the comparison of the reading speed between the two modes for each Q-algorithms.

• Journal of Korean Library and Information Science Society
• /
• v.46 no.3
• /
• pp.201-224
• /
• 2015

This study analyzes the influences on the reading flow, reading satisfaction, and continuous willingness to read books for parents, teachers, and friends as a reading role model to influence high school students and the differences in the personal characteristics; gender, disciplines, and grade. The result shows that the most important contributor for high school students' reading is friends and male students are more influenced by their friends than female students. In addition, students in vocational high school are more influenced by their friends than students in academic high school. Parents factor relatively affects the reading for male students, 3rd grade students in high school, and students in academic high school. On the other hand, teachers barely affect the reading factors for students.

• Journal of the Korean Society of Safety
• /
• v.7 no.1
• /
• pp.5-12
• /
• 1992

Disc specimen with the center crack and edge crack simulated by two-dimensional static method is used to analyze the stress field around the crack tip in terms of the stress intensity factor, K. A simple and convenient method of testing to realize the mifed mode stress intensity factor of the cracked body is used, The conclusions obtatined in this photoelastlc analysis are as follows ; 1. According to this experiment, cracked disc specimen can be used to demonstrate the mixed mode stress intensity factor analysis by simply changing the crack angle from the loading line. 2. Despite the simplicity and continuous data reading, the photoelastic method shows the slightly lower strain reading comparing to the FEM analysis method. 3. In this photoelastic analysis, $K_{I}$ of center cracked disc specimen under a pair of compressive load shows negative value as the crack angle increases over 30$^{\circ}$.

• Science of Emotion and Sensibility
• /
• v.13 no.1
• /
• pp.21-32
• /
• 2010

This study investigated the effects of contiguity and reading mode on cognitive load factors measured by Galvanic Skin Response(GSR). In this study two experimental conditions were imposed to participants to measure cognitive load with the high contiguity picture and low contiguity picture. Thirty-four college students participated to this experiment(experiment group=17, control group=17), and spilt-plot factorial design was applied to control individual difference in galvanic skin response. Tasks of this experiment were reading and summary. The dependent variables were skin conductance response, and perceived difficulty. The independent variables were the degree of contiguity of visual material(high contiguity vs. low contiguity). The major result of this study was identification of a significant difference of GSR with low contiguity condition. Indeed it was identified that more complex reading condition required more cognitive loads. This finding supported that different cognitive process might require different amounts of cognitive loads. For the further research, this study discussed the validity of applying physiological signals to assess cognitive loads and relationships the associated affective reactions.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.576-581
• /
• 2002

The suspension is a structure that supports reading, writing head in information storage device. In order to develop the information storage device of high track density, it is necessary to study about the suspension. To satisfy operation condition of information storage device, the suspension shape is very important since it correlates to dynamic characteristics. Therefore, it is necessary to analyze the dynamic characteristics by using finite element analysis and to optimize the suspension of information storage device using size optimization and topology optimization. The suspension has various modes according to different kinds of frequency bandwidth. Sway mode and second torsion mode are especially critical among them. In this paper, we investigated method to improve bandwidth of sway and second torsion mode of HDD and ODD suspension by using size optimization and topology optimization.

• Journal of Engineering Education Research
• /
• v.15 no.5
• /
• pp.87-92
• /
• 2012

Independent study is a major ability of engineering students. In independent study training practice, we need to use different instructional strategies and responds to individual student needs and learning styles. The purpose of this paper is to demonstrate a four-step student independent study training mode we applied to teaching the Biomedical Engineering students in Dali University, China. We developed this teaching mode to fulfill the goals of the first years' undergraduates training and improve the students learning skills. The four-step teaching mode includes both in-class and out-of-class activities. The emphasis is on how to train students to get information from the reading materials, understand the concept, develop critical thinking and eventually become independent learner.

• Journal of the Ergonomics Society of Korea
• /
• v.7 no.2
• /
• pp.31-44
• /
• 1988

If an error occurs in the automatic mode when the advanced teleoperator system performs a task in hostile environment then the automatic mode changes into the manual mode. The operation by the control program and the operation by a human recover the error in the manual mode. The system resumes the automatic mode and continues the given task. It is necessary to improve the manual mode in order to make the best use of a man-robot system, as a part of the human interface technique. Therefore, the error recovery task is performed by combining the operation by the control program representing autonomy of a robot and the operation by a human representing versatility of a human operator effectively in the view point of human factors engineering. The geometric inverse kinematics is used for the calculation of the robot joint values in the operation by the control program. The singularity operation error and the parameter operation error often occur in this procedure. These two operation errors increase the movement time of the robot and the coordinate reading time, during the error recovery task. A singularity algorithm, parameter algorithm and fuzzy control are studied so as to remove the disadvantages of geometric inverse kinematics. And the geometric straight line motion is studied so as to improve the disadvantages of the operation by a human.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.149-157
• /
• 2019

In case of reading passport using a smart phone in contrast with a dedicated passport reading system, MRZ(Machine Readable Zone) character recognition can be hard when the character strokes were broken, touched or blurred according to the lighting condition, and the position and size of MRZ character lines were varied due to the camera distance and angle. In this paper, the effective recognition algorithm of the passport MRZ information using a combined neural network recognizer of CNN(Convolutional Neural Network) and ANN( Artificial Neural Network), is proposed under the various sized and skewed passport images. The MRZ line detection using connected component analysis algorithm and the skew correction using perspective transform algorithm are also designed in order to achieve effective character segmentation results. Each of the MRZ field recognition results is verified by using five check digits for deciding whether retrying the recognition process of passport MRZ information or not. After we implement the proposed recognition algorithm of passport MRZ information, the excellent recognition performance of the passport MRZ information was obtained in the experimental results for PC off-line mode and smart phone on-line mode.