• The Journal of Korean Academy of Prosthodontics
• /
• v.15 no.1
• /
• pp.34-42
• /
• 1977

The author attempted to observed the histological changes of the temporomandibular joints of rabbits by including malocclusion. Thirth-two healthy male rabbits were devided into two groups; control and experimental group. Eight rabbits were kept as control group, while metal crowns were seated on unilateral lower molar teeth of twenty-four rabbits as experimental group. And the interocclusal distance of the incisal edge was kept 1.5mm from the begining to the end of the experimental periods. Rabbits of each group, one of control group and three of the experimental gorup, were killed at the intervals of one day, three days, one week, two weeks, four weeks, six weeks, eight weeks, and twelve weeks after experiment. The temporomandibular joint including condyle head, articular disc and glenoid fossa were excised and decalcified. The decalcified sections were made histologic sections. The results obtained were as follows. 1. The regressive changes of the condylar head were the main reaction in this experiment that consist of decreasing or increasing thickness of the fibrocartilage zone with hyaline degeneration, decreasing of the cellularity of the proliferative zone, and the irregularity of the arrangement of chondrocytes and size of the lacunae of cartilage cells with chondroclasia and osteoclasia in hypertrophic zone. 2. The regressive changes of the condylar surface of the crown seated side were persisted to the end of the experiment. 3. On the non-crown seated side, severe aggressive changes occurred in initial stage, but hyperplastic changes of the condylar surface noted in the middle of the experimental periods. 4. Although aggressive changes occurred in initial stage of experiment on the non-crown seated side, hyperplastic changes of the condylar surface were noted in the middle of the experimental periods, and remodeling appeared at the termination of the experimental periods. 5. The articular disc exhibited pannus formation on both crown seated and non crown seated side from the beginning of the experiment. The pannus persisted throughout the experiment on the crown seated side, but on the non-crown seated side it disappeared from six week group.

• Journal of Technologic Dentistry
• /
• v.27 no.1
• /
• pp.73-78
• /
• 2005

The surface-reacted layer of titanium castings greatly affects their mechanical properties. This study analyzed the interfacial zone of Ti-20%Zr-5%Cr alloy castings obtained from phosphate bonded investment and examined the relationship between the surface-reacted layer and hardness. The Vickers hardness of cast disks were tested at 20$\mu m$ intervals from the surface to 120$\mu m$ in depth. The cross-section was observed metallurgically, and line profile of the reacted layer was conducted under the EDX. The surface-reacted layer of Ti-20%Zr-5%Cr alloy is showed a similar tendency to Ti-6%Al-4%V alloy in thickness, and also Si diffusion in multiple reacted layer of Ti-20%Zr-5%Cr alloy is less than cp Ti and similar to Ti-6%Al-4%V alloy. The Vickers hardness in the surface layer was greater than in the inner part, and the Vickers hardness of Ti-20%Zr-5%Cr alloy ranged 650 to 390 and cp Ti ranged 810 to 160, Ti-6%Al-4%V alloy ranged 710 to 530 respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.11
• /
• pp.1813-1821
• /
• 2004

Until now, the 40% of wall thickness criterion, which is generally used for the plugging of steam generator tubes, has been applied only to a single cracked geometry. In the previous study by the authors, a total number of 9 local failure prediction models were introduced to estimate the coalescence load of two collinear through-wall cracks and, then, the reaction force model and plastic zone contact model were selected as the optimum ones. The objective of this study is to estimate the coalescence load of two collinear through-wall cracks in steam generator tube by using the optimum local failure prediction models. In order to investigate the applicability of the optimum local failure prediction models, a series of plastic collapse tests and corresponding finite element analyses for two collinear through-wall cracks in steam generator tube were carried out. Thereby, the applicability of the optimum local failure prediction models was verified and, finally, a coalescence evaluation diagram which can be used to determine whether the adjacent cracks detected by NDE coalesce or not has been developed.

• Computers and Concrete
• /
• v.23 no.1
• /
• pp.69-80
• /
• 2019

Modeling approach for mesoscopic model of concrete depicting mass transportation and physicochemical reaction is important since there is growing demand for accuracy and computational efficiency of numerical simulation. Mesoscopic numerical simulation considering binder, aggregate and Interfacial Transition Zone (ITZ) generally produces huge number of DOFs, which is inapplicable for full structure. In this paper, a three-dimensional multiscale approach describing three-phase structure of concrete was discussed numerically. An effective approach generating random aggregate in polygon based on checking centroid distance was introduced. Moreover, ITZ elements were built by parallel expanding the surface of aggregates on inner side. By combining mesoscopic model including full-graded aggregate and macroscopic model, cases related to diffusivity and thickness of ITZ, volume fraction and grade of aggregate were studied regarding the consideration of multiscale compensation. Results clearly showed that larger analysis model in multiscale model expanded the diffusion space of chloride ion and decreased chloride content in front of rebar. Finally, this paper addressed some worth-noting conclusions about the chloride distribution and rebar corrosion regarding the configuration of, rebar diameter, concrete cover and exposure period.

• The Journal of Korean Physical Therapy
• /
• v.19 no.1
• /
• pp.67-78
• /
• 2007

Purpose: The purpose of this study were to examine the anti-hyperalgesic effects of combination of electroacupuncture and microcurrent on anti-hyperalgesia in local hyperalgesia zone. Methods: It used 24 rats for experiment, divided them into control group, electroacupuncture group (EA group), microcurrent group (MC group), combination of electroacupuncture with microcurrent (EA+MC group), caused hyperalgesia by injecting ${\lambda}-carrageenan$ into hindpaw. Thickness of hindpaw, mechanical pain threshold (MPT), thermal pain threshold (TPT), noxious flexion withdrawal reflex (NFR) and somatosensory evoked potential (SEP) were measured immediately after induction, at 24 hours, 48 hours and 72 hours after induction. The electrical stimulation was given once a day for three days, 20min per session. Results: Change of thickness, MPT, and TPT showed significant difference in all groups compared to control group. In particular, there were remarkable difference in EA+ME group. In particular there were remarkable differences in EA group and EA+MC group. Change of NFR(% threshold, % reaction time, % RMS) and SEP showed mainly significant differences in EA group and EA+ME group compared to control group. In particular, there were remarkable difference in EA+ME group. Conclusion: The above results suggest that appropriate combination of microcurrent with electroacupuncture for pain control will be very desirable.

• Journal of fish pathology
• /
• v.21 no.1
• /
• pp.67-79
• /
• 2008

This study was conducted to find out biological response of bivalves exposed to tributyltin chloride(TBTCl). The results of the study confirmed that TBTCl induce the reduction of oxygen consumption rateand histopathological feature in the gill structure of equilateral venus, Gomphina veneriformis. The experi-mental groups consisted of a control and 3 TBTCl exposure groups (0.4, 0.6 and 0.8 yg TBTCl L') and theexperimental period was 36 weeks. For histological analysis, gill tissues were fixed in Bouin's fluid andthen stained H-E stain, AB-PAS (PH 2.5) reaction and Masson's trichrome stain after having serially sec-tioned the tissue by paraffin method at thickness of 4-6 (an. The oxygen consumption rate was not signifi-cantly different between the control and exposure groups at 4 weeks, but in all exposure groups at 28 weeks,it was significantly different to the control. Gill of G. veneriformis had demibranch that attached two sheetsof lamellae and a lamella was composed of numerous filaments, numbering 25 on average. The frontal fila-ment zone had three types of cilia; frontal, latero-frontal and lateral depending on locations while the lateralcilia were the longest and largest in number. The mucous cells observed in filaments were more abundant in(542c) in AB-PAS (PH 2.5) reaction. Gill exposed to TBTCl was extended hemolymph sinus and increased hemocytes at 4 weeks, and then it showed increases of mucous cells and partially disappearance of frontalcilia. In the group of 0.8 yg TBTCl L' at 12 weeks, hypertrophy of frontal and latero-frontal epithelia wasobserved. Also it observed m decrease of mucous cell containing weekly acid mucosubstance and appearedpartially destruction muscle fiber bundle, In the groups of 0.4 and 0.6 ug TBTCl L' at 36 weeks, it appearedpartially modification of epithelia and in 0.8 us TBTCl L' group, observed filaments that come out chiti-nous rod from disappearance of frontal and latero-frontal epithelia.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.9 no.2
• /
• pp.64-72
• /
• 2004

We measured the vertical profiles of $O_2$, H$_2$S, and pH in sediment pore water beneath marine cage fish farms using a microsensor with a 25 ${\mu}{\textrm}{m}$ sensor tip size. The sediments are characterized by high organic material load. The oxygen consumption, hydrogen sulfide oxidation, and sulfate reduction rates in the microzonations (derived from the vertical distribution of chemical species concentration) were estimated by adapting a simple one-dimensional diffusion-reaction model. The oxygen penetration depth was 0.75 mm. The oxic microzonations were divided into upper and lower layers. Due to hydrogen sulfide oxidation within the oxic zone, the oxygen consumption rate was higher in the lower layer. The total oxygen consumption rate integrated with reaction zone depth was estimated to be 0.092 $\mu$mol $O_2$cm$^{-2}$ hr$^{-1}$ . The total hydrogen sulfide oxidation rate occurring within 0.7 mm thickness was estimated to be 0.030 $\mu$mo1 H$_2$S cm$^{-2}$ hr$^{-1}$ , and its turnover time in the oxic sediment layer was estimated to be about 2 minutes. This suggests that hydrogen sulfide was oxidized by both chemical and microbial processes in this zone. The molar consumption ratio, calculated to be 0.84, indicates that either other electron accepters exit on hydrogen sulfide oxidation, or elemental sulfur precipitation occurs near the $O_2$- H$_2$S interface. Total sulfate reduction flux was estimated to be 0.029 $\mu$mol cm$^{-2}$ hr$^{-1}$ , which accounted for more than 60% of total $O_2$ consumption flux. This result implied that the degradation of organic matter in the anoxic layer was larger than in the oxic layer.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.353-358
• /
• 2013

The hot corrosion behavior of plasma sprayed 4 mol% $Y_2O_3-ZrO_2$ (YSZ) thermal barrier coatings (TBCs) with volcanic ash is investigated. Volcanic ash that deposited on the TBCs in gas-turbine engines can attack the surface of TBCs itself as a form of corrosive melt. YSZ coating specimens with a thickness of 430-440 ${\mu}m$ are prepared using a plasma spray method. These specimens are subjected to hot corrosion environment at $1200^{\circ}C$ with five different duration time, from 10 mins to 100 h in the presence of corrosive melt from volcanic ash. The microstructure, composition, and phase analysis are performed using Field emission scanning electron microscopy, including Energy dispersive spectroscopy and X-ray diffraction. After the heat treatment, hematite ($Fe_2O_3-TiO_2$) and monoclinic YSZ phases are found in TBCs. Furthermore the interface area between the molten volcanic ash layers and YSZ coatings becomes porous with increases in the heat treatment time as the YSZ coatings dissolved into molten volcanic ash. The maximum thickness of this a porous reaction zone is 25 ${\mu}m$ after 100 h of heat treatment.