DOI QR코드

DOI QR Code

Numerical study of ITZ contribution on diffusion of chloride and induced rebar corrosion: A discussion of three-dimensional multiscale approach

  • Tu, Xi (Key Laboratory of New Technology for Construction of Cities in Mountain Area (Chongqing University), Ministry of Education) ;
  • Pang, Cunjun (Key Laboratory of New Technology for Construction of Cities in Mountain Area (Chongqing University), Ministry of Education) ;
  • Zhou, Xuhong (Key Laboratory of New Technology for Construction of Cities in Mountain Area (Chongqing University), Ministry of Education) ;
  • Chen, Airong (Department of Bridge Engineering, Tongji University)
  • Received : 2018.08.24
  • Accepted : 2019.01.30
  • Published : 2019.01.25

Abstract

Modeling approach for mesoscopic model of concrete depicting mass transportation and physicochemical reaction is important since there is growing demand for accuracy and computational efficiency of numerical simulation. Mesoscopic numerical simulation considering binder, aggregate and Interfacial Transition Zone (ITZ) generally produces huge number of DOFs, which is inapplicable for full structure. In this paper, a three-dimensional multiscale approach describing three-phase structure of concrete was discussed numerically. An effective approach generating random aggregate in polygon based on checking centroid distance was introduced. Moreover, ITZ elements were built by parallel expanding the surface of aggregates on inner side. By combining mesoscopic model including full-graded aggregate and macroscopic model, cases related to diffusivity and thickness of ITZ, volume fraction and grade of aggregate were studied regarding the consideration of multiscale compensation. Results clearly showed that larger analysis model in multiscale model expanded the diffusion space of chloride ion and decreased chloride content in front of rebar. Finally, this paper addressed some worth-noting conclusions about the chloride distribution and rebar corrosion regarding the configuration of, rebar diameter, concrete cover and exposure period.

Keywords

Acknowledgement

Supported by : National Natural Science Foundation of China, Central Universities

References

  1. Andrade, C., Alonso, C. and Molina, F.J. (1993), "Cover cracking as a function of bar corrosion: Part I-Experimental test", Mater. Struct., 26(8), 453-464. https://doi.org/10.1007/BF02472805
  2. Angst, U., Elsener, B., Larsen, C.K. and Vennesland, O. (2009), "Critical chloride content in reinforced concrete-A review", Cement Concrete Res., 39(12), 1122-1138. https://doi.org/10.1016/j.cemconres.2009.08.006
  3. Bailakanavar, M., Liu, Y., Fish, J. and Zheng, Y. (2012), "Automated modeling of random inclusion composites", Eng. Comput., 30(4), 609-625. https://doi.org/10.1007/s00366-012-0310-x
  4. Bernard, F. and Kamali-Bernard, S. (2015), "Numerical study of ITZ contribution on mechanical behavior and diffusivity of mortars", Comput. Mater. Sci., 102, 250-257. https://doi.org/10.1016/j.commatsci.2015.02.016
  5. Biondini, F., Bontempi, F., Frangopol, D.M. and Malerba, P.G. (2004), "Cellular automata approach to durability analysis of concrete structures in aggressive environments", J. Struct. Eng., 130(11), 1724-1737. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:11(1724)
  6. Biondini, F., Bontempi, F., Frangopol, D.M. and Malerba, P.G. (2006), "Probabilistic service life assessment and maintenance planning of concrete structures", J. Struct. Eng., ASCE, 132(5), 810-825. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:5(810)
  7. Caballero, A., Lopez, C.M. and Carol, I. (2006), "3D meso-structural analysis of concrete specimens under uniaxial tension", Comput. Meth. Appl. Mech. Eng., 195(52), 7182-7195. https://doi.org/10.1016/j.cma.2005.05.052
  8. Chen, L., Qian, Z. and Wang, J. (2016), "Multiscale numerical modeling of steel bridge deck pavements considering vehicle-pavement interaction", Int. J. Geomech., 16(1), B4015002.. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000461
  9. Dridi, W. (2013), "Analysis of effective diffusivity of cement based materials by multi-scale modelling", Mater Struct, 46(1-2), 313-326. https://doi.org/10.1617/s11527-012-9903-5
  10. Du, X., Jin, L. and Ma, G. (2014), "A meso-scale numerical method for the simulation of chloride diffusivity in concrete", Finite Elem. Anal. Des., 85, 87-100. https://doi.org/10.1016/j.finel.2014.03.002
  11. Francois, R. and Arliguie, G. (1999), "Effect of microcracking and cracking on the development of corrosion in reinforced concrete members", Mag. Concrete Res., 51(2), 143-150. https://doi.org/10.1680/macr.1999.51.2.143
  12. Hiratsuka, Y. and Maekawa, K. (2015), "Multi-Scale and multi-chemo-physics analysis applied to fatigue life assessment of strengthened bridge decks", Comput. Plast. XIII: Fund. Appl., 596-607.
  13. Li, C.Q. (2000), "Corrosion initiation of reinforcing steel in concrete under natural salt spray and service loading-results and analysis", Mater. J., 97(6), 690-697.
  14. Liu, T. andWeyers, R.W. (1998), "Modeling the dynamic corrosion process in chloride contaminated concrete structures", Cement Concrete Res., 28(3), 365-379. https://doi.org/10.1016/S0008-8846(98)00259-2
  15. Ma, H., Xu, W. and Li, Y. (2016), "Random aggregate model for mesoscopic structures and mechanical analysis of fully-graded concrete", Comput. Struct., 177, 103-113. https://doi.org/10.1016/j.compstruc.2016.09.005
  16. Maekawa, K., Ishida, T. and Kishi, T. (2003), "Multi-scale modeling of concrete performance integrated material and structural mechanics", J. Adv. Concrete Technol., 1(2), 91-126. https://doi.org/10.3151/jact.1.91
  17. Mori, D., Yamada, K., Hosokawa, Y. and Yamamoto, M. (2006), "Applications of electron probe microanalyzer for measurement of Cl concentration profile in concrete", J. Adv. Concrete Technol., 4(3), 369-383. https://doi.org/10.3151/jact.4.369
  18. Pan, Z., Chen, A. and Ruan, X. (2015), "Spatial variability of chloride and its influence on thickness of concrete cover: A two-dimensional mesoscopic numerical research", Eng. Struct., 95, 154-169. https://doi.org/10.1016/j.engstruct.2015.03.061
  19. Pritpal, S.M. and Mahmoud, S.E. (1999), "Flexural strength of concrete beams with corroding reinforcement", Struct. J., 96(1), 149-158.
  20. Savija, B., Lukovic, M., Pacheco, J. and Schlangen, E. (2013), "Cracking of the concrete cover due to reinforcement corrosion: A two-dimensional lattice model study", Constr. Build. Mater., 44, 626-638. https://doi.org/10.1016/j.conbuildmat.2013.03.063
  21. Savija, B., Pacheco, J. and Schlangen, E. (2013), "Lattice modeling of chloride diffusion in sound and cracked concrete", Cement Concrete Compos., 42, 30-40. https://doi.org/10.1016/j.cemconcomp.2013.05.003
  22. Sun, G., Zhang, Y., Sun, W., Liu, Z. and Wang, C. (2011), "Multi-scale prediction of the effective chloride diffusion coefficient of concrete", Constr. Build. Mater., 25(10), 3820-3831. https://doi.org/10.1016/j.conbuildmat.2011.03.041
  23. Torres-Acosta, A.A., Navarro-Gutierrez, S. and Teran-Guillen, J. (2007), "Residual flexure capacity of corroded reinforced concrete beams", Eng. Struct., 29(6), 1145-1152. https://doi.org/10.1016/j.engstruct.2006.07.018
  24. Torres-Acosta Andres, A. and Martinez-Madrid, M. (2003), "Residual life of corroding reinforced concrete structures in marine environment", J. Mater. Civil Eng., 15(4), 344-353. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:4(344)
  25. Tu, X., Li, Z., Chen, A. and Pan, Z. (2018), "A multiscale numerical simulation approach for chloride diffusion and rebar corrosion with compensation model", Comput. Concrete, 21(4), 471-484. https://doi.org/10.12989/CAC.2018.21.4.471
  26. Unger, J.F. and Eckardt, S. (2011), "Multiscale modeling of concrete", Arch. Comput. Meth. Eng., 18(3), 341. https://doi.org/10.1007/s11831-011-9063-8
  27. Vidal, T., Castel, A. and Francois, R. (2004), "Analyzing crack width to predict corrosion in reinforced concrete", Cement Concrete Res., 34(1), 165-174. https://doi.org/10.1016/S0008-8846(03)00246-1
  28. Vidal, T., Castel, A. and Francois, R. (2007), "Corrosion process and structural performance of a 17 year old reinforced concrete beam stored in chloride environment", Cement Concrete Res., 37(11), 1551-1561. https://doi.org/10.1016/j.cemconres.2007.08.004
  29. Wang, X., Zhang, M. and Jivkov, A.P. (2016), "Computational technology for analysis of 3D meso-structure effects on damage and failure of concrete", Int. J. Solid. Struct., 80, 310-333. https://doi.org/10.1016/j.ijsolstr.2015.11.018
  30. Wang, Z.M., Kwan, A.K.H. and Chan, H.C. (1999), "Mesoscopic study of concrete I: generation of random aggregate structure and finite element mesh", Comput. Struct., 70(5), 533-544. https://doi.org/10.1016/S0045-7949(98)00177-1
  31. Wu, K., Xu, L., Schutter, G.D., Shi, H. and Ye, G. (2015), "Influence of the interfacial transition zone and interconnection on chloride migration of portland cement mortar", J. Adv. Concrete Technol., 13(3), 169-177. https://doi.org/10.3151/jact.13.169
  32. Xu, J. and Li, F. (2017), "A meso-scale model for analyzing the chloride diffusion of concrete subjected to external stress", Constr. Build. Mater., 130, 11-21. https://doi.org/10.1016/j.conbuildmat.2016.11.054
  33. Ren, J.Y.W. (2006), "Generation of spatial convex polyhedron random aggregate model", ICOME 2006, Hefei, China.
  34. Zhang, R., Castel, A. and Francois, R. (2009), "The corrosion pattern of reinforcement and its influence on serviceability of reinforced concrete members in chloride environment", Cement Concrete Res., 39(11), 1077-1086. https://doi.org/10.1016/j.cemconres.2009.07.025
  35. Zhang, R., Castel, A. and Francois, R. (2010), "Concrete cover cracking with reinforcement corrosion of RC beam during chloride-induced corrosion process", Cement Concrete Res., 40(3), 415-425. https://doi.org/10.1016/j.cemconres.2009.09.026
  36. Zhang, Z. and Zhang, Q. (2017), "Self-healing ability of Engineered Cementitious Composites (ECC) under different exposure environments", Constr. Build. Mater., 156, 142-151. https://doi.org/10.1016/j.conbuildmat.2017.08.166
  37. Zhang, Z. and Zhang, Q. (2018), "Matrix tailoring of Engineered Cementitious Composites (ECC) with non-oil-coated, low tensile strength PVA fiber", Constr. Build. Mater., 161, 420-431. https://doi.org/10.1016/j.conbuildmat.2017.11.072
  38. Zhao, Y., Gao, X., Xu, C. and Jin, W. (2009), "Concrete surface chloride ion concentration varying with seasons in marine environment (Chinese)", J. Zhejiang Univ. (Eng. Sci.), 43(11), 2120-2124.
  39. Zheng, J.J., Wong, H.S. and Buenfeld, N.R. (2009), "Assessing the influence of ITZ on the steady-state chloride diffusivity of concrete using a numerical model", Cement Concrete Res., 39(9), 805-813. https://doi.org/10.1016/j.cemconres.2009.06.002
  40. Zheng, J.J. and Zhou, X.Z. (2013), "Effective medium method for predicting the chloride diffusivity in concrete with ITZ percolation effect", Constr. Build. Mater., 47, 1093-1098. https://doi.org/10.1016/j.conbuildmat.2013.05.108
  41. Zhu, W., Francois, R., Fang, Q. and Zhang, D. (2016), "Influence of long-term chloride diffusion in concrete and the resulting corrosion of reinforcement on the serviceability of RC beams", Cement Concrete Compos., 71, 144-152. https://doi.org/10.1016/j.cemconcomp.2016.05.003
  42. Zhu, Z., Chen, H., Liu, L. and Li, X. (2017), "Multi-scale modelling for diffusivity based on practical estimation of interfacial properties in cementitious materials", Powder Technol., 307, 109-118. https://doi.org/10.1016/j.powtec.2016.11.036

Cited by

  1. Numerical model for local corrosion of steel reinforcement in reinforced concrete structure vol.27, pp.4, 2019, https://doi.org/10.12989/cac.2021.27.4.385