• 제목/요약/키워드: reaction time

검색결과 6,789건 처리시간 0.039초

수지반응에 의한 중고령자의 동노적응능력 평가 (Evaluation of labor adaptation of middle and old aged by finger reaction)

  • 서승록;이상도
    • 대한인간공학회지
    • /
    • 제11권1호
    • /
    • pp.31-38
    • /
    • 1992
  • The population of aged people in industries has been increased remarkably due to the decline of birth rates and the increase of average life span. Also, the current automation trends makes aged people to work easy in industries since automation technologies help them to avoid physically hard tasks. Therefore the evaluation of aged workers' adaptability would be an important research topic. In the study, the mean and standard deviation of the reaction time are calculated to see the differences with four lamps's types and ages. It is found that the mean reaction time and the standard deviation are increased with the the increase of age. The quantitative approach provides an important information to be used not only for the adaptability estimation of aged workers but also for the working capability qualification for re-employment.

  • PDF

Measurement of Branching Ratio for broad 27-keV Resonance of $^{19}F(n,g)^{20}F$ Reaction by using Time-of-flight Method with Anti-Compton NaI(Tl) Spectrometer

  • Lee, Sam-Yol
    • 한국방사선학회논문지
    • /
    • 제2권1호
    • /
    • pp.31-34
    • /
    • 2008
  • The neutron capture spectrum for the light nuclide was very useful to study the nuclear structure. In the present study, the capture gamma-ray from the 27-keV resonance of $^{19}F(n,g)^{20}F$ reaction were measured with an anti-Compton NaI(Tl) spectrometer and the 3-MV Pelletron accelerator of the Research Laboratory for Nuclear Reactors at the Tokyo institute of technology. A neutron Time-of-Flight method was adopted with a 1.5 ns pulsed neutron source by the $^7Li(p,n)^7Be$ reaction. In the present experiment, a Teflon(($CF_2$)n) sample was used The sample was disk with a diameter of 90mm. The thickness of sample was determined so that reasonable counting rates could be obtained and the correction was not so large for the self-shielding and multiple scattering of neutrons in the sample, and was 5mm. The primary gamma-ray transitions were compared with previous measurement of Kenny.

  • PDF

고체철-용융아연의 용해반응 (The Dissolving Reaction of Solid Iron with Molten Zinc)

  • 윤병하;정인상;박경채
    • 한국표면공학회지
    • /
    • 제9권2호
    • /
    • pp.1-7
    • /
    • 1976
  • The dissolving and growth kinetics of intermetallic compounds for the reaction between solid iron and molten zinc were studied under nitorgen atmosphere over the temperature range between470$^{\circ}C$ and 680$^{\circ}C$. The rates of dissolution of solid iron into molten zinc were obtained under a static conditon, The amount of dissolution of sold iron and the growth of intermetalic compounds could be determined by means of microscopy. The thickness of intermetallic compound at a given temperature increases with increasing time, whereas for a given time decreases with increasing temperature . The rate of dissolution is controlled by the diffusion process of iron in the effective boundary layer of molten zinc over the temperature range 470$^{\circ}$-530$^{\circ}C$, 570$^{\circ}$-620$^{\circ}C$, and 650$^{\circ}$-665$^{\circ}C$, while by the surface reaction over the range 530$^{\circ}$-570$^{\circ}C$ and 620$^{\circ}$-650$^{\circ}C$.

  • PDF

1H-NMR 분광분석을 통한 진한 산 가수분해 반응 2차 반응 조건 분석 (Analysis of secondary reactions in concentrated sulfuric acid hydrolysis of hollocellulose by 1H-NMR spectroscopy)

  • 이재성;신수정
    • 펄프종이기술
    • /
    • 제46권3호
    • /
    • pp.37-43
    • /
    • 2014
  • Kinetics of holocellulose hydrolysis in concentrated sulfuric acid was analyzed using $^1H$-NMR spectroscopy with different reaction time, temperature and acid concentration in secondary hydrolysis. In this work, reaction condition of secondary hydrolysis was similar to concentrated sulfuric acid process with electrodialysis or simulated moving bed chromatography process for sulfuric acid recycling. By $^1H$-NMR spectroscopy, acid hydrolyzates from higher secondary acid hydrolysis (25-35% acid concentration) was successfully analyzed without any difficulties in neutralization or adsorption of acid hydrolyzate to solid salt. Higher acid concentration, higher temperature and longer reaction time led to more cellulose for glucose conversion but accompanied with glucose to galactose isomerization, glucose to unknown compounds and degradation of glucose to organic acid via furans.

PCR을 이용한 salmonella enteritidis의 특이적 검출 (Specific detection of salmonella enteritidis using polymerase chain reaction method)

  • 조미영;여용구;김영섭;이정학;이병동
    • 한국동물위생학회지
    • /
    • 제23권3호
    • /
    • pp.227-233
    • /
    • 2000
  • Salmonella enteritidis is the most prevalent etiologic agents of foodborne acute gastroenteritis. Direct isolation and identification of S enteritidis are time consuming work and not so highly sensitive. This study was conducted to develop for the specific detection of S enteritidis using polymerase chain reaction(PCR). PCR primers were selected to amplify a 351-base pair(bp) DNA fragment from the salmonella plasmid virulence A(spv A) gene of S enteritidis. With the primers, 351 bp DNA products were amplified from S enteritidis but not from other B, D, Cl serogroup Salmonella spp. It was sensitive to detect up to 40 pg of template DNA by agarose gel electrophoresis. This PCR assay is very rapid and specific method and less time consuming than the standard bacteriological methods.

  • PDF

Cure Characteristics of Metal Particle Filled DGEBA/MDA/SN/ zeolite Composite System for EMI Shielding

  • Cho, Young-Shin;Lee, Hong-Ki;Shim, Mi-Ja;Kim, Sang-Wook
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 춘계학술대회 논문집
    • /
    • pp.548-551
    • /
    • 1999
  • The cure characteristics of metal particle filled DGEBA/MDA/SN/ zeolite epoxy resin composite system for EMI shielding were investigated by dynamic DSC run method and FT-lR spectroscopy. As the heating rate increased, the peak temperature on dynamic DSC curve increased because of the rapid cure reaction. From the straight line of the Kissinger plot, the curing reaction activation energy and pre-exponential factor could be obtained. As the post-curing time at 15$0^{\circ}C$ increased, the glass increased the glass transition temperature or the thermal stability increased. When the post curing time is too long, the system filled with metallic Al particle can be thermally oxidized by the catalytic reaction of metal filler and the thermal stability of the composite for the EMI shielding application may be decreased.

  • PDF

CRDS Study of Tropospheric Ozone Production Kinetics : Isoprene Oxidation by Hydroxyl Radical

  • Park, Ji-Ho
    • 한국환경보건학회지
    • /
    • 제35권6호
    • /
    • pp.532-537
    • /
    • 2009
  • The tropospheric ozone production mechanism for the gas phase additive oxidation reaction of hydroxyl radical (OH) with isoprene (2-methyl-1,3-butadiene) has been studied using cavity ring-down spectroscopy (CRDS) at total pressure of 50 Torr and 298 K. The applicability of CRDS was confirmed by monitoring the shorter (~4%) ringdown time in the presence of hydroxyl radical than the ring-down time without the photolysis of hydrogen peroxide. The reaction rate constant, $(9.8{\pm}0.1){\times}10^{-11}molecule^{-1}cm^3s^{-1}$, for the addition of OH to isoprene is in good agreement with previous studies. In the presence of $O_2$ and NO, hydroxyl radical cycling has been monitored and the simulation using the recommended elementary reaction rate constants as the basis to OH cycling curve gives reasonable fit to the data.

콜로이드 실리카 종류와 산도영향에 따른 졸겔코팅제 특성연구 (Properties of Sol-Gel Materials Synthesized According to Kinds of Colloidal Silica and Acidity)

  • 강동필;안명상;나문경;명인혜;강영택
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
    • /
    • pp.1927-1929
    • /
    • 2005
  • Colloidal Silica(CS)/methyltrimethoxy silane(MTMS) sol solutions were prepared in variation with synthesizing parameters such as kinds of CS, acidity and reaction time. In order to understand its surface properties, sol-gel coating films on glass were fabricated. The coating film obtained from CS/MTMS sol had stable contact angle and more enhanced flat surface at reaction time of 24 hours. In case of the initial and final period of reaction, the coating films had unstable contact angle and more rough surface. In addition, surface of CS/MTMS sol-gel coating film was more rougher with increasing of acidity.

  • PDF

엘리트 야구 선수의 타격 특성 연구 (The study of batting characteristics in elite baseball players)

  • 이영석
    • 한국운동역학회지
    • /
    • 제13권1호
    • /
    • pp.173-184
    • /
    • 2003
  • The purpose of this study was to investigate the batting characteristics in elite baseball players. Seven skilled collegiate players hit the ball which was thrown by a pitching machine linearly and strongly to the center of the field. Time, velocity, angle and pound reaction force variables were measured by using high-speed video cameras and pound reaction force analyzer. The results were as follows: 1. The elite players finished their stride performance in a short time and they stayed longer in a swing phase. The increases in the range of trunk rotation were associated with the delay of the swing phase. 2. The 'take-back' phenomenon in the trunk was showed after the stride phase. 3. The down swing demonstrated powerful line drives. 4. Equivalent body weights were placed on both feet during the ready phase. 95% of the body weights were moved to the rear foot during the stride phase, whereas the body weights were driven to the front foot during the swing phase. 95% of the body weights were placed on the front foot at impact.

Chloride ion removal effect for the ACF electrochemically treated with silver

  • Oh, Won-Chun;Park, Choung-Sung;Bae, Jang-Soon
    • 분석과학
    • /
    • 제19권4호
    • /
    • pp.316-322
    • /
    • 2006
  • The removal efficiencies of silver-ACFs were associated with their surface properties such as surface area, porosity, and the electro-chemical reaction time for the silver treatments. X-ray diffraction patterns of fibers electrochemically treated with silver display diffraction peaks for metallic silver and kinds of silver chloride complexes on the fiber surface after electrochemical adsorption. The results of SEM and EDX indicate that surface reaction motive of silver-ACF prepared by electrochemical reaction are depend on time function for the chloride ion removal efficiency. Finally, Cl ion adsorbed by the silver-ACFs from the ICP analysis seems to show an excellent removal effect.