• 대한감각통합치료학회지
• /
• 제5권1호
• /
• pp.31-40
• /
• 2007

Objective: The purpose of this study was to get the cognitive reaction time according to the intensity of auditory stimuli in older people and to differentiate the cognitive reaction time between older people and adults. Method: 49 subjects consisted of 32 older people and 17 adults. Cognitive reaction time was assessed with Simple Auditory Reaction of Foundation I in PSS CogReHab. Analysis of the data was done by using independent t-test. Results: The results were as follows: 1. There was a significant difference of the mean of cognitive reaction time to the intensity of auditory stimuli. 2. There was no significant difference from older people regardless of sexual distinction in mean of cognitive reaction time. However, there was a significant difference of the mean of cognitive reaction time in adults. 3. There was a significant difference between older people who got a job or not in 90 dB of auditory stimuli. 4. The mean of cognitive reaction time to the intensity of auditory stimuli in older people was slower than adults. There was a significant difference of the mean of cognitive reaction time between older people and adults in 70 dB of auditory stimuli. 5. The mean of cognitive reaction time to the intensity of auditory stimuli in older people did not have the significant difference in scholastic ability. Conclusions: The results of the study showed slowing of the cognitive reaction time in auditory stimuli to aging in older people. Therefore, applying silver industry and development of equipment for older people may maintain independent life.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.671-677
• /
• 2009

A reaction wheel is commonly used, as an important actuator, to control the attitude of a satellite. Operation of the reaction wheel plays a role of an excitation source to loading equipment inside the satellite. As requirements for environmental vibration to manifest the performance of precision equipment are getting more stringent, the research for analysis or reduction of unwanted action force in high frequency range when operating the reaction wheel is necessary. In this paper, the procedure to extract input forces and damping of a rotor system of reaction wheel is suggested. The analysis for measured action forces of reaction wheel is accomplished and important higher harmonics of action forces are determined. The input forces and damping of the rotor system are, then, extracted by curve-fitting and a particular solution for input force.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1864-1873
• /
• 1993

A biomechanical approach was carried out to analyze foot-floor reaction forces acting on five male subjects performing a walking task. The task analyzed was walking over an obstacle with the right bare foot. The foot-floor reaction data were measured from a force plate, and then processed using a software developed. The source program was coded in the C language for easier on-line data acquisition and graphic displays. High repeatability was found in the reaction data acquired from three trials by each subject. For obstacle height from 0 to 25 cm, the maximum in reaction force reached up to 1.048 BW in the vertical, 0.174 BW in the anterior-posterior, and 0.054 BW in the medio-lateral components, respectively. A quantity was defined by the difference between two vertical reaction values, and this quantity was found to be proportional to the obstacle height. It was also shown that the whole body motion could be predicted the measured foot-floor reaction data.

• 한국소음진동공학회논문집
• /
• 제20권3호
• /
• pp.263-271
• /
• 2010

A reaction wheel is commonly used, as an important actuator, to control the attitude of a satellite. Operation of the reaction wheel plays a role of an excitation source to loading equipment inside the satellite. As requirements for environmental vibration to manifest the performance of precision equipment are getting more stringent, the research for analysis or reduction of unwanted action force in high frequency range when operating the reaction wheel is necessary. In this paper, the procedure to extract input forces and damping of a rotor system of reaction wheel is suggested. The analysis for measured action forces of reaction wheel is accomplished and important higher harmonics of action forces are determined. The input forces and damping of the rotor system are, then, extracted by curve-fitting and a particular solution for input force.

• 자원리싸이클링
• /
• 제24권6호
• /
• pp.3-8
• /
• 2015

일정 온도에서 중량 변화를 통하여 가스화 반응 특성을 살펴볼 수 있는 열중량 분석기(thermobalance)를 이용하여 하수슬러지의 수증기 가스화 특성 및 발생 가스의 농도 분석을 실시하였다. 반응 온도 및 수증기의 분압이 증가할수록 가스화 반응이 촉진되어 반응 속도가 증가하는 것으로 나타났다. 반응 kinetics 해석은 기체-고체 화학반응의 세 가지 모델이 이용되었다. 이 중 하수슬러지 촤의 수증기 가스화는 modified volumetric reaction model이 반응 kinetics를 가장 잘 나타내었으며, 이 때 activation energy와 빈도 인자는 각각 155.5 kJ/mol, $14,087s^{-1}atm^{-1}$로 분석되었다. 또한, 수증기의 분압에 따른 반응 차수는 0.68이었다. 합성가스의 발생 특성을 살펴보고자 $900^{\circ}C$에서 생성 합성가스를 분석한 결과 수소의 농도가 가장 높았으며 수증기 분압이 증가할수록 생성기체의 농도 특히 수소 농도가 급격히 증가하였다. 가스화와 동시에 수성가스화 변환반응이 진행되어 생성기체의 수소 생성 농도가 일산화탄소에 비하여 2-4배 높은 값을 나타내었다.

• 한국작물학회지
• /
• 제51권1호
• /
• pp.89-94
• /
• 2006

Traditionally fatty acid composition used to be analysed by a GC and the sample preparation process includes lipid extraction from sample and subsequent methyl esters preparation, which are time-consuming and cumbersome. As an alternative, simultaneous extraction/methylation methods are being developed for rapid and simplified sample preparation. To optimize one-step extraction/methylation method for analysis of fatty acid composition in brown rice, various reaction factors such as sample to reaction solution ratio, reaction time and temperature, shaking intensity were changed and resultant fatty acid composition data were evaluated in comparison with previous reports. The ratio of sample weight to reaction solution volume was the most critical factor in that higher sample to reaction solution ratio caused overestimation of palmitic acid and linoleic acid composition, resulting in underestimation of oleic acid. Lower reaction temperature also induced overestimation of linoleic acid and underestimation of oleic acid. Reaction duration and the intensity of shaking prior to and during the reaction, however, caused no significant changes in analysis results. In conclusion, the optimum condition was mixing 5 grains (about 0.2 g) of brown rice with $680{\mu}L$ of extraction/methylation mixture and $400{\mu}L$ of heptane, followed by reaction at $80^{\circ}C$ for 2 hours.

• Bulletin of the Korean Chemical Society
• /
• 제25권10호
• /
• pp.1508-1512
• /
• 2004

A gas chromatography/mass spectrometric (GC/MS) method has been developed for the determination of trace mono-n-butyltin (MBT), di-n-butyltin (DBT), and tri-n-butyltin (TBT) compounds in sediments. Samples were extracted by 10% acetic acid in methanol containing 0.03% tropolone and were then derivatized for GC/MS analysis. Ethylation by sodium tetraethylborate and phenylation by sodium tetraphenylborate were evaluated as a derivatization reaction of the organotins in sample extract. n-Hexane was added into reaction media in the beginning of the reaction for the continuous extraction of derivatized organotins. Ethylation requires less than 2 hours to get proper derivatization yields for MBT, DBT, and TBT altogether and produces relatively low amounts of side reaction products. Compared to ethylation, phenylation requires much longer time but provides relatively lower yield and produces considerable amounts of side reaction products. Therefore, the ethylation reaction was applied for the analysis of organotin compounds in sediment. An isotope dilution mass spectrometric (IDMS) method based on GC/MS has been applied to the accurate determination of DBT compounds in the sediments. The IDMS results from the analyses of sediment samples showed a reasonable repeatability and a good agreement with the values obtained by IDMS based on liquid chromatography/induced coupled plasma/mass spectrometry.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.65-72
• /
• 2016

This paper presents the analysis of the analysis of thrust characteristics of linear induction motors(LIMs) according to secondary reaction plate. LIMs are well known as high speed transport systems, which can obtain thrust directly without gears and links, or auxiliary mechanisms. A simple structure, easy maintenance, and less environmental pollution are advantages of LIMs. In transport systems using LIMs, the secondary reaction plate is an important design factor, because it has considerable impact on the cost of the railway as well as the performance of the LIMs. This paper deals analyzed the characteristics of linear induction motor used for moving the vehicle of container scanner. Thrust, efficiency and load characteristic were interpreted with FEM regarding two models whose material of secondary reaction plate was copper and aluminum. It suggested the interpretation of thrust, efficiency and power factor characteristic along slip and compared the operation ability of linear induction motor through characteristics analysis along the load.

• Journal of Biosystems Engineering
• /
• 제25권3호
• /
• pp.179-186
• /
• 2000

Interactions between wheel lug surfaces and soil were analyzed through wheel motion. In this paper, lug surfaces such as trailing and leading lug sides and a lug face were analyzed and reported. The interactions between the surfaces and soil were expressed as the horizontal and vertical directions of resultant forces acting on the surfaces. There analysis indicated qualitatively that (1) the trailing lug side is mainly related to produce motion resistance and reaction to dynamic load, (2) the lug face is related to produce not only the motion resistance, the reaction to the dynamic load but also the traction and (3) the leading lug side is mainly related to produce the traction and the reaction to the dynamic load. Experiments were conducted to prove the results of the motion analysis. Normal and tangential forces acting on the surfaces were measured, and the traction, the motion resistance and the reaction to the dynamic load were calculated with wheel rotational and lug design angles. The experiments proved that the results of wheel motion analyses above mentioned as (1), (2) and obtained from the analysis were correct.

• 한국물환경학회지
• /
• 제26권6호
• /
• pp.919-925
• /
• 2010

The features of precipitating reaction of fluoride have been examined by employing waste gypsum as a precipitant. The major component of waste gypsum was examined to be CaO with minor components of $SO_3$, $SiO_2$. In the experimental condition, the precipitating reaction of fluoride progressed rapidly within a few minutes after the reaction started and reached its equilibrium in 10 minutes. Kinetic analysis showed that the precipitating reaction of fluoride generally followed a first Oder and second Oder with decreasing rate constant with the initial dosage of precipitant. XRD analysis showed that the crystalline structure of precipitate was mainly $CaF_2$ with partly $Ca_5(PO_4)_3(OH)$.