• 한국방사선학회논문지
• /
• 제12권1호
• /
• pp.101-106
• /
• 2018

다층박막거울은 높은 반사 효율로 엑스선을 단색화 하는데 많이 사용되고 있다. 반사되는 엑스선의 파장은 두께주기와 입사각도에 의해 결정되고, 반사율은 층수와 표면 거칠기에 크게 의존하게 된다. 다층박막거울은 중원소와 경원소가 번갈아 적층되어 있는 구조로 되어 있으며 각 계면에서의 거칠기를 고려해야 한다. 본 논문에서는 두께 변화 W/Si 다층박막거울에서 계면 거칠기와 상호확산을 동시에 고려하여 반사율을 조사하였다. 두께 변화 다층박막거울은 균일한 다층박막거울에 비해 반사율은 감소하나 각도 및 에너지 반치폭이 넓은 특징을 보였으며, 상호확산에 따른 반사율의 저하가 크게 증가하였다. 이론적인 설계값에 가까운 반사율을 획득하기 위해서는 다층박막거울을 제작 할 때 나타나는 상호확산의 효과를 고려하여 설계함으로써 목적에 부합하는 최적의 다층박막거울을 설계하고 제작할 수 있을 것이다.

• 한국재료학회지
• /
• 제28권3호
• /
• pp.189-194
• /
• 2018

Porous graphites were synthesized by removing the template in HF after cabothermal conversion for 3 h at $900^{\circ}C$, accompanied by intercalations of pyrolyzed fuel oil (PFO) in the interlayer of Co or Ni loaded magadiite. The X-ray powder diffraction pattern of the porous graphites exhibited 00l reflections corresponding to a basal spacing of 0.7 nm. The particle morphology of the porous graphites was composed of carbon plates intergrown to form spherical nodules resembling rosettes like a magadiite template. TEM shows that the cross section of the porous graphites is composed of layers with very regular spaces. In particular, crystallization of the porous graphite was dependent on the content of Co or Ni loaded in the interlayer. The porous graphite had a surface area of $328-477m^2/g$. This indicates that metals such as Co and Ni act as catalysts that accelerate graphite formation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.292-295
• /
• 2004

Recently, polymer-clay hybrid materials have received considerable attention from both a fundamental research and application point of view. This organ-inorganic hybrid, which contains a nanoscale dispersion of the layered silicates, is a material with greatly improved thermal and mechanical characteristics. Two classes of nanocomposites were synthesized using an unsaturated polyester resin as the matrix and sodium montmorillonite as well as an organically modified montmorillonite as the reinforcing agents. X -ray diffraction pattern of the composites showed that the interlayer spacing of the modified montmorillonite were exfoliated in polymer matrix. The mechanical properties also supported these findings, since in general, tensile strength, modulus with modified montmorillonite were higher than the corresponding properties of the composites with unmodified montmorillonite. Adding organically modified clay improved the tensile strength of unsaturated polyester by $22\%$ and the tensile modulus of unsaturated polyester was also improved by $34\%$.

• 한국의류학회지
• /
• 제20권4호
• /
• pp.682-689
• /
• 1996

A preparative method has been proposed for obtaining chitosan products which have a desired degree of deacetylation (DD, %) without much decrease in molecular weight. Deacetylation was prepared by two methods. The method I which was proposed by Domard etc. was that DMSO/thiophenol was used repeatedly only during the deacetylation, the method II was that DMSO/thiophenol was used after the alkali treatment. Then, effective deacetylation was performed by the method ll. To determine the degree of deacetylation, potentiometric titration method was adopted. According to the increase of DD, the viscosity average moleclar weght $(\overline{M\upsilon}$) and the DP of the chitosan products were decreased. The intensity of FT-lR peak appeared at $1655cm^{-1}, which was characteristic peak of amide I (Nacetyl secondary amide group), was gradually decreased with deacetylation. X-ray analysis showed that the lattice-spacing in the chitosan film increased with the degree of deacetylation, but the difference of the transparency of the chitosan products was not diverged significantly.

• 멤브레인
• /
• 제14권2호
• /
• pp.132-141
• /
• 2004

본 연구에서는 NBR과 여러 가지의 유기화물로 처리된 MMT type의 clay를 이용하여 NBR-Clay 하이브리드 막을 용융삽입법으로 제조하였다. Internal mixer를 사용하여 clay를 NBR에 분산시켰으며, 제조된 NBR-Clay 하이브리드에서 clay의 특성피크가 다소 감소하거나 이동하는 XRD 결과로부터 clay의 층간거리가 넓어지는 고분자의 clay층간삽입을 확인하였다. Clay의 종류에 따라서 제조된 NBR-Clay 하이브리드 막의 가스투과도, 기계적 물성 및 열적 성질을 측정하였다. NBR-Clay 하이브리드 막은 clay 자체의 도입과 층간거리의 확대로 기체분자의 tortuosity를 증가시켜서 가스투과도를 저하시키는 것을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.227-227
• /
• 2010

The intercalation chemistry of graphite presents an attractive route to obtain few-layered graphene platelets based on the expanded interlayer spacing. We report that the lithium can be intercalated into the graphite in a controllable manner by adjusting the variables such as temperature, pressure, and reaction time. From the X-ray diffraction experiments, the lithium-graphite intercalaltion compounds (Li-GICs) can be produced as the first stage compounds ($LiC_6$), the second-stage compounds ($LiC_{12}$), and the mixtures, which is most likely to be dependent on the temperature and reaction time. Since these Li-GICs are expected to facilitate the exfoliation of graphite, we investigated the feasibility of Li-GICs as a effective precursors for the generation of single-or few-layered graphite nano-platelets.

• 한국의류산업학회지
• /
• 제11권3호
• /
• pp.481-487
• /
• 2009

The purpose of this study is to improve the defects of dyeable polypropylene(DPP) fabric by heat setting and to describe the change of physical properties of DPP fabrics. The thermosetting was carried out in autoclave from 100 to $140^{\circ}C$ temperature range for 2 min. In this study, we investigated the effect of the thermosetting temperatures on the structural, thermal, mechanical properties(e.g., the strength and elongation) and dyeability of DPP fabrics. The melting energy(J/g), the tensile strength was found to increase with increasing temperature of thermosetting. The diffraction peak at Bragg angle($2{\theta}$) about $13.8^{\circ}$ were very strong and diffraction intensity increased with increasing thermosetting temperatures. And d-spacing and half-width decreased with increasing thermosetting temperatures. On the other hand, the dyeability(K/S) and crease recovery decreased with an increasing thermosetting temperatures.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.61-62
• /
• 2000

We have studied the molecular orientation by the phase transitions of the chiral smectic liquid crystals, 4-(1-Trifluoromethyl-6-ethoxy-hexyloxycarbonlphenyl)-4-nonyloxybiphenyl-4-carbo-xylate (R-TFMEOHPNBC) to seek the original solution of the zig-zag defect using two different experimental techniques; optical system and x-ray scattering. The phase sequence is gamma ferroelectric $(SmC{\gamma}\;^*)$ ${\rightarrow}$ smectic A (SmA) ${\rightarrow}$ isotropic (I). Existence of two layer spacing at chiral smectic phase gives a possibility of the molecular orientation in two different tilt angles, ${\theta}\;_1$ and ${\theta}\;_2$, which are separated each other to the layer normal at a given temperature. The gamma ferroelectric-like phase is, first, discovered in the single compound.

• 대한전자공학회논문지
• /
• 제27권4호
• /
• pp.527-533
• /
• 1990

Zone-melting recrystallization (ZMR) system using two graphite heaters(a stationary sheet and a narrow movable bar) was constructed and implemented in recrystallization op Si films on insulating layers. The recystallized Si films were examined by Nomarski contrast optical microscopy after Dash etching, transmission electron diffraction pattern, and x-ray diffraction. With optimum conditions of process parameters(input powers of the bottom and upper heater, scanning speed of the upper heater, and the gap between sample and upper heater), the recrystallized Si layer has a (100) texture, but contains many subboundaries. The subgrains are misoriented by < 0.5\ulcorner and the average spacing between subboundaries is about 25\ulcorner.

• Journal of the Optical Society of Korea
• /
• 제19권5호
• /
• pp.531-536
• /
• 2015

This paper presents a new graphical method for selecting a pair of optical glass and housing materials to simultaneously achromatize and athermalize a multilens system composed of many elements. To take into account the lens spacing and housing, we quantify the lens power, chromatic power, and thermal power by weighting the ratio of the paraxial ray height at each lens to them. In addition, we introduce the equivalent single lens and the expanded athermal glass map including a housing material. Even though a lens system is composed of many elements, we can simply identify a pair of glass and housing materials that satisfies the athermal and achromatic conditions. Applying this method to design a black box camera lens equipped with a 1/4-inch image sensor having a pixel width of $2{\mu}m$, the chromatic and thermal defocusings are reduced to less than the depth of focus, over the specified ranges in temperature and frequency.