• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.559-564
• /
• 2002

This paper describes a new algorithm named as ray following algorithm which is applied for high-resolution satellite image simulation. The problems of the conventional ray tracing algorithm are pointed out especially when terrain elevations vary abruptly. The proposed algorithm follows the directional ray vector sequentially and thoroughly in order to determine the crossing point of the ray with the terrain surface. This way of sequential height comparison method is regarded as the only way to obtain accurate surface cross-section when a highly variant digital surface model is used. The experimental results show and compare the validities of the conventional and proposed algorithms.

• Journal of the Korean Wood Science and Technology
• /
• 제37권1호
• /
• pp.19-28
• /
• 2009

국내산 밤나무 목재의 효율적 이용을 위한 기초 자료를 얻기 위하여 밤나무 7품종(단택, 이취, 이평, 만성, 은기, 유마, 축파)의 목재 해부학적 특성의 방사방향 변이성을 조사하였다. 즉, 횡단면에서 도관요소의 방사 및 접선 직경, 개수 및 방사조직 밀도를 그리고 접선단면에서 방사조직 높이 및 개수를 광학현미경법으로 측정하였다. 밤나무 7품종 목재에 있어 조재 도관요소의 방사 직경이 접선 직경보다 더 컸으며, 방사 및 접선 직경은 수령 증가에 따라 점차 증가하는 경향이 보였다. 단위 면적 당 도관요소의 개수는 수령 증가에 따라 점차 감소하는 경향이 있었다. 방사조직 밀도는 수령 증가에 따른 증감의 변화 없이 거의 일정하였다. 방사조직의 개수는 수령 증가에 따라 점차 증가하는 경향이 있었고, 이와 대조적으로 방사조직의 높이는 낮아지는 경향이 나타났다. 방사조직의 높이가 높을수록 단위 면적($mm^2$) 당 방사조직 개수는 감소하고 방사조직의 높이가 낮을수록 방사조직 개수는 증가하는 경향을 보였다. 결론적으로 방사조직 밀도를 제외한 도관요소 및 방사조직 특성들은 밤나무의 성숙재와 미성숙재를 판단하는 지표로 사용될 수 있을 뿐만 아니라 밤나무의 품종별 구분이 가능할 것으로 생각되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제37권1호
• /
• pp.65-72
• /
• 2009

잣나무와 낙엽송 조림목 수간 내에서 단열방사조직과 방추형방사조직의 연륜 내 및 축방향의 변이성을 조사하였다. 잣나무와 낙엽송의 단열방사조직의 높이는 각기 평균 6.3 및 9.1 세포고로서 낙엽송이 더 높았다. $0.25mm^2$ 면적당 단열방사조직의 개수는 각각 평균 6.5개 및 7.5개로써 낙엽송이 더 많았으며 방추형방사조직의 높이는 양 수종 모두 평균 20세포고 정도로서 거의 차이가 없었다. 연륜 내에서 조재부에서 만재부로 이행해 감에 따라 단열방사조직과 방추형방사조직의 높이는 감소하였으나 개수에는 거의 변화가 없었다. 축방향으로 단열방사조직의 세포고는 지상고가 증가함에 따라 점차 증가하였다. 단열방사조직의 개수는 잣나무에서 지상고 5.2m까지 거의 일정하였고 그 이상의 지상고부터 증가하였으나 낙엽송에서는 일관된 경향을 찾아보기 어려웠다. 방추형방사조직의 높이는 지상고가 낮은 수간의 기부에서 가장 낮았으며 수간의 중앙부로 올라감에 따라 높아 지다가 수관부에서 다시 낮아지는 경향이 있었다. 본 연구 결과, 연륜 내에서의 방사조직의 변이성은 비교적 뚜렷하였으나 축방향에서의 변이성은 일관된 경향이 없어 그 경향을 명확히 밝히는 것은 어려울 것으로 생각되었다.

• 한국가시화정보학회지
• /
• 제8권4호
• /
• pp.48-53
• /
• 2010

Water-uptake through roots, is an essential process of the water flow in plants. Its visualization is very useful for understanding sap flow dynamics at whole plant level. In this study, the tips of Arabidopsis' root hairs were excised and exposed to repeated dehydration and rehydration processes. The water-refilling through individual xylem vessels was visualized using the synchrotron X-ray micro-imaging technique. The high temporal resolution ($2\;{\mu}m$) and beam intensity of the X-ray source allowed to acquisition of consecutive X-ray images of the water-refilling process up to 10 frames/sec. Various flow patterns were observed and the ascending speed of the water-air interfaces was analyzed. The relation between the water-rising height and ascending speed was also analyzed. The present results would provide better alternative for investigating sap flows in roots.

• Imaging Science in Dentistry
• /
• 제32권2호
• /
• pp.61-66
• /
• 2002

Purpose: To compare the bone height of implant sites measured using panoramic radiography and spiral CT. Materials and Methods : The available bone height was determined for 263 maxillary and mandibular implant sites in 59 patients. Distortion was calculated using the metal bar for the panoramic radiographs. Results: Significant differences in mean bone height between the two imaging modalities were found in maxillary and mandibular anterior regions (p<0.05). The mean difference in bone height recorded by the two techniques was smallest in the maxillary and mandibular molar areas (0.8 mm), and greatest in the mandibular anterior region (1.3 mm). With the exception of the mandibular anterior region, ninety percent of all the sites showed measurement differences within 2 mm. Conclusion: A safety margin of 2 to 3 mm is called for when utilizing panoramic radiography, otherwise additional imaging modality such as computed tomography is necessary to obtain accurate measurements.

• 반도체디스플레이기술학회지
• /
• 제5권1호
• /
• pp.1-4
• /
• 2006

Recently, Ball Grid Arrays(BGAs) are getting used more frequently for a package type. The connectors on a BGA consist of a large number of small solder balls in a grid shape on its bottom side. However, since balls of BGAs mounted on PCBs are not visible, inspection before mounting them is indispensable. High speed non-contact 3D measurement technologies are necessary far real-time measurement of ball height, the most important inspection item. In this paper, an accurate 3D data acquisition system for BGAs is proposed that can acquire 3D profile at high speed using a 3D smart camera and laser slit ray projection. Some clipping and morphological filtering operations are employed to remove spiky error data, which occur due to reflections from some ball area to camera direction.

• 농업과학연구
• /
• 제37권3호
• /
• pp.351-354
• /
• 2010

This study was carried out to develop a new sweet sorghum for biomass by using mutagen, gamma-ray. Seeds treated were gained from National Genetic Resource Center, RDA, and these seeds were irradiated with gamma-ray (400Gy) at KAERI. CNUS-M113 and CNUS-M134 among 169 collected accessions were evaluated a promising line for biomass due to increasing of fresh and dry weight. In addition, this line was high in stem height, number of tiller and fresh weight per plant than check, Hwang-gum chal sorghum. Accordingly, this line demanded for leading variety the production test and cultivation adaptability in future years.

• 펄프종이기술
• /
• 제35권4호
• /
• pp.68-74
• /
• 2003

Kenaf(Hibiscus cannabinus L.) cultivar, Tainung 2, had been grown for 152 days at the experimental farm of Jinju National University, Gajoa-dong, Jinju-si, Kyongnam, Korea. The planting, growth rate, fertilization and structural characteristics as well as the cultivation and growth characteristics of kenaf, and the product usage were investigated. The narrowest diameter at kenaf bottom was 10 mm, the widest 42 mm and the average about 28 mm, and the shortest height 150 cm, the tallest 480 cm and the average about 350 cm. The weight of a core fraction was 68.1％ and a bast fraction 31.9％. The weight ratio of core material to bast fiber was 2.31. The weight ratio of dry stem was 73.5％ and that of leaves 26.5％. The weight of dry plant produced in 1 $m^2$ was 1,467 g, and about 1,052 g of stem could be used for the commercial purpose, The application of fertilizers resulted in the increase of the growth rate of the diameter at plant bottom and the height. Bast fiber, phloem ray and cortex parenchyma cell were observed in bast, and vessel, wood fiber and ray in core.

• Journal of Forest and Environmental Science
• /
• 제7권1호
• /
• pp.1-6
• /
• 1990

소련의 시베리아 지방(地方)에서 생육(生育)하고 있는 주요(主要) 침엽수재(針葉樹材)인 가문비나무(Picea jezoensis), 북양전나무(Abies sachaliensis), 잣나무 (Pinus karaiensis), 구주소나무(Pinus sylvetris) 및 북양낙엽송 (Larix gmelini)에 대하여 가도관(假導管)의 길이, 그리고 방사조직(放射組織)의 높이와 밀도(密度)의 출현상태(出現狀態) 및 변이(變異)를 조사하였으며 그것을 요약(要約)하면 다음과 같다. 1) 가도관(假導管)의 길이는 잣나무가 가장 길며(평균 $3550{\mu}$), 그 다음이 북양전나무와 북양낙엽송(각각 $3440{\mu}$)이고, 가문비나무가 약 $2900{\mu}$으로 가장 짧았다. 또한 한국산(韓國産) 침엽수재(針葉樹材)보다 다소 긴 경향(傾向)이 있다. 2) 일반적(一般的)으로 가도관(假導管)의 길이는 심재부(心材部)보다도 변재부(邊材部)에서, 또한 조재부(早材部)보다도 만재부(晩材部)에서 더 긴 경향(傾向)을 나타내고 있다. 3) 방사조직(放射組織)의 높이는 북양낙엽송이 가장 높고(14.5세포고(細胞高)), 그 다음이 가문비나무와 구주소나무(약 13.5세포고(細胞高))이며, 잣나무가 9.7세포고(細胞高)로 가장 낮았으며, 한국산(韓國産) 침엽수재(針葉樹材)보다는 높은 경향(傾向)이 있었다. 4) 방사조직(放射組織)의 높이는 수심부(髓心部)에 가까운 젊은 영계(令階)에서는 낮고 수피부(樹皮部)로 향(向)하여 높아지는 경향이 있다. 5) 횡단면(橫斷面)에서 접선방향(接線方向) 1mm내(內)에 함유(含有)되는 방사조직밀도(放射組織密度)는 북양낙엽송과 가문비나무가 7.9와 8.3개(個)로 가장 많으며, 북양전나무가 7.1, 그리고 잣나무와 구주 소나무가 6.1~6.2개(個)로 가장 적었다.

• 방사선산업학회지
• /
• 제6권2호
• /
• pp.189-197
• /
• 2012

This study was carried out to develop the improved useful mutants for yield or composition of stevia plants using the gamma ray or chemical mutagens treatments. The seeds of stevia 'Suwon No. 11' were irradiated up to 400 Gy of gamma ray. Chemical mutagens were treated on the seeds of the 'Suwon No. 11' using 0.07% colchicine, 10 mM sodium azide, or 10 mM NMU for various durations. The germination rate, and shoot and root growth of seedling were estimated at 30 days after gamma ray irradiation or chemical mutagen treatment, and the plant height, the number of branches, and leaf length and width were examined at 3 months after mutagenesis treatments. In the case of gamma ray treatments, the germination rate and early-stage growth were decreased as the increase of radiation dose, and the 50% lethal dose was found to be 200 Gy. the plant height was decreased as the increase of radiation dose, while the number of branches per plant and leaf length were increased. Leaf shape was modified to the relatively longer one compared to the control, which was identified more apparently at the treatments of higher than 150 Gy. In the treatment of chemical mutagens, the rate of germination and survival were decreased as the increase of incubation time. The 50% lethal dose for germination rate were identified as the conditions of the 15 hours incubation in 0.07% colchicine, the 4 hrs in 10 mM sodium azide, and the 2 hrs in 10 mM NMU, in the three chemical mutagens treatments. Chemical mutagens had no influence on shoot growth, while root growth was increased, especially as the incubation time was extended. The highest root growth occurred in the NMU treatment at 6 hrs incubation time. The plant height was decreased as the increase of incubation time in the chemical mutagens treatments. Among the chemical mutagens, NMU was the most effective to induce the mutants with long-shaped or the least lobed leaves.