• 대한방사선기술학회지:방사선기술과학
• /
• 제22권2호
• /
• pp.41-46
• /
• 1999

Osteoporosis, which causes mainly fracture of the spine, proximal femur and distal radius by minimal trauma, is a major public health problem and its prevalence is steadily increasing in Korea according to the development of public health care. There are reliable methods for diagnosis based on bone densitometry. Early detection and intervention are important for reducing the incidence of fractures. A consensus definition of osteoporosis, based on bone density measurement, has been developed by the World Health Organization(WHO). In this study, bone mineral density(RMD) was measured by dual energy x-ray absorptiometry(DEXA) at the proximal femur and lumbar spine in 132 post-menopausal women. The purpose of this study is to find influential factors on the BMD of the proximal femur and the lumbar spine and to analyze correlation between BMD and the problematic factors. We obtained the following results : 1. Mean BMD score, T-score and Z-score of the proximal femur were $0.81(g/cm^2)$, -2.45(S.D.) and -2.09(S.D.) respectively and in the lumbar spine were $0.83(g/cm^2)$, -2.02(S.D.), -2.43(S.D.) respectively. 2. In correlation analysis between BMD and many factors, correlation coefficients were -0.467, 0.212, -0.321 and 0.241 in age, height, duration after menopause respectively. BMI and the residuals were comparatively small. 3. Correlation coefficients to age matched BMD, in height and body weight were 0.222 and 0.241, in age and duration after menopause were -0.268, -0.282. 4. The fracture threshold of proximal femur BMD to the 90th percentile was $0.845(g/cm^2)$. 5. At the result of multiple regression analysis, age, body weight, $BMI(kg/m^2)$ and duration after menopause described as significant variables.

• 디지털융복합연구
• /
• 제12권12호
• /
• pp.651-658
• /
• 2014

본 연구는 천장관절 증후군으로 진단받은 중년남성 17명을 대상으로 슬링을 이용한 요부 안정화 운동이 근체형 및 주관적 통증에 영향을 주는지를 규명하여 슬링을 이용한 요부안정화 운동의 효과성을 증명하는데 있다. 본 연구의 대상자는 C시에 소재한 S정형외과에서 X-Ray 등의 검사를 통하여 천장관절 증후군으로 진단 받은 6개월 이상의 병력이 있는 만성 요통환자를 대상으로 슬링을 이용한 요부안정화 운동을 8주간 주 3회씩 1회 30분 통 24회 실시한 후 3차원 Moire 근체형검사기를 사용하여 근체형의 변화와 변형된 VAS통증 자각도를 이용하여 주관적 통증정도의 전 후 변화를 다음과 같은 결과를 얻었다. 근체형의 변화는 운동전과 운동 후 통계적으로 유의하게 향상됐고 주관적 통증정도 역시 통계적으로 유의한 감소를 나타내었다. 따라서 슬링을 이용한 요부안정화 운동은 천장관절 증후군 환자의 근체형 및 통증개선에 긍정적인 영향을 주는 것으로 판명되었다.

• 복식
• /
• 제49권
• /
• pp.49-63
• /
• 1999

This research utilized the Energy Dispersive X-ray Spectroscopy(EDS) and the Inductively Coupled Plasma Mass Spectrometry in the analysis of chemical elements present among the textiles exhumed from Kupori Hwasung-kun Kyunggi-do. The two research objectives were: first to examine the elements present and their percent presence in Kupori samples: second to investigate whether the elements are part of mordant substances which could have been used when dyeing the KUpori textiles in the past. To meet such research purposes standard silk fabric was dyed with Sophorajaponica using alum and iron mordants. For alum mordant unpurified general alum and potassium aluminum sulfate(AlK(SO4)2). iron sulfate(FeSO4·7H2O) were used, From the results of EDS and ICP-Mass analysis the following conclusions were drawn. 1 According to the EDS analysis 9 elements Ca, S, Al, Si, K, Fe, P, Mg and Na were detected. 2. ICP-Mass result of the mordant chemicas showed high amount of A, Al and k present in alum mordants and S and Fe present in iron mordants. 3. Comparison of the ICP-Mass results of the mordant chemicals and those of the standard dyed samples suggested that the amount presence of Al and Fe is a strong indication of the usage of alum and iron mordants respecticely in an unknown dyed textile. 4, In the washed Kupori textiles Fe showed a relatively higher rate of presence in the samples Therefore it can be conjectured that those Kupori textiles were dyed with iron mordant based on the result of the above number 3. 5. It is probable that the other elements detected from the Kupori samples were incorporated into the textiles as part of the soil debris produced from the degradation of the dead within the coffin or the earth debris. They can also be part of the inorganic compounds inherent in the silk textiles themselves before dyed. 6. Among the elements it is likely that Ca which showed a high degree of presence among the unwashed samples was part of the inorganic compound inferent in the silk textiles.

• 대한수의학회지
• /
• 제34권4호
• /
• pp.665-678
• /
• 1994

This study was undertaken to investigate histological changes according to the radiosensitivity in the spermatogenic cells in Korean native pheasants. During spermatogenetic period, testes wete collected from male adult Korean native pheasant and they were used as experimental and control birds. The experimental group was divided into a single-dose whole body irradiation group(400, 600, 800 and 1000 rads) and a split-dose whole body irradiation groups(400/2, 600/2, 800/2 and 1000/2 rads). A Henseky's $^{60}Co$ ${\gamma}$-radiotherapy machine was used for this experiment and the dose rate of $^{60}Co$ ${\gamma}$-ray was 104 rads/min. The experimental birds were sacrificed at 24 and 72 hrs after irradiation and the control pheasants were sacrificed at the same time. General histological changes of seminiferous epithelial cells were observed by hematoxylin-eosin stain with light microscope. The results obtained are summarized as follows ; 1. In the single-dose and the split-dose irradiation groups, the average diameter of the seminiferous tubule was decreased compared with control group. 2. Seminiferous epithelial cells were more severely damaged after 72 hrs than after 24 hrs of single-dose irradiation of 400, 600 and 800 rads but the difference of cell injury was almost not observable with the elapsed time in the group of the single-dose irradiation of 1000 rads. 3. The damage of spermatogenic cells were more severe after 24 hrs than after 72 hrs of the split-dose irradiation of 400 rads but the split-dose irradiation of 600, 800 and 1000 rads were more severe after 72 hrs than after 24 hrs.

• 천문학회보
• /
• 제42권1호
• /
• pp.45.2-46
• /
• 2017

3C 84 (NGC 1275) is one of the most famous radio galaxies and a lot of VLBI observations have been conducted to date because of its brightness and proximity (z = 0.0176; 1 mas = 0.36 pc). The source is entering a significantly active phase with long-term increase in radio flux at cm wavelengths since 2005, and the increased activity at very-high-energy (VHE) gamma rays. In order to study properties of sub-pc-scale structure and the circumnuclear environment in 3C 84, we have conducted multi-epoch VLBI observations with the Korean VLBI Network (KVN) at 86 and 129 GHz, and monthly monitoring by the KVN and VERA Array (KaVA) at 43 GHz from 2015 August. Following the report in the previous KAS meeting (cf. 2016 KAS Autumn Annual Meeting, [구 GC-10]), we present further results mainly on the basis of twelve-epoch observations with KaVA at 43 GHz. Through the monthly monitoring with KaVA, we found that peak intensity of the pc-scale southern lobe (C3) was increased from $2.60\;Jy\;beam^{-1}$ in 2015 October to $9.80\;Jy\;beam^{-1}$ in 2016 June, corresponding to a flux increase of 3.7 times in eight months. We also detected change in direction of motion of C3 from transversal to outward with respect to C1, concurrently with the beginning of its flux increase in 2015 October. We consider that these phenomena are due to interaction of C3 with the ambient medium, and are related to the gamma-ray flare which has been detected with VHE gamma-ray telescopes such as MAGIC and VERITAS.

• The Journal of Advanced Prosthodontics
• /
• 제6권4호
• /
• pp.285-294
• /
• 2014

PURPOSE. The purpose of this study was to evaluate the properties of a porous zirconia scaffold coated with bioactive materials and compare the in vitro cellular behavior of MC3T3-E1 preosteoblastic cells to titanium and zirconia disks and porous zirconia scaffolds. MATERIALS AND METHODS. Titanium and zirconia disks were prepared. A porous zirconia scaffold was fabricated with an open cell polyurethane disk foam template. The porous zirconia scaffolds were coated with ${\beta}$-TCP, HA and a compound of ${\beta}$-TCP and HA (BCP). The characteristics of the specimens were evaluated using scanning electron microscopy (SEM), energy dispersive x-ray spectrometer (EDX), and x-ray diffractometry (XRD). The dissolution tests were analyzed by an inductively coupled plasma spectrometer (ICP). The osteogenic effect of MC3T3-E1 cells was assessed via cell counting and reverse transcriptase-polymerase chain reaction (RT-PCR). RESULTS. The EDX profiles showed the substrate of zirconia, which was surrounded by the Ca-P layer. In the dissolution test, dissolved $Ca^{2+}$ ions were observed in the following decreasing order; ${\beta}$-TCP > BCP > HA (P<.05). In the cellular experiments, the cell proliferation on titanium disks appeared significantly lower in comparison to the other groups after 5 days (P<.05). The zirconia scaffolds had greater values than the zirconia disks (P<.05). The mRNA level of osteocalcin was highest on the non-coated zirconia scaffolds after 7 days. CONCLUSION. Zirconia had greater osteoblast cell activity than titanium. The interconnecting pores of the zirconia scaffolds showed enhanced proliferation and cell differentiation. The activity of osteoblast was more affected by microstructure than by coating materials.

• 한국의류학회지
• /
• 제25권5호
• /
• pp.925-932
• /
• 2001

The influence of ultraviolet(UV)-ray in sun light on human skin has been noted. Textiles can provide protection against harmful UV-radiation. Normally UV-absorbing finishes are used to get better protection. The purpose of this study is to evaluate the UV-cut properties of cotton fabrics treated with UV-absorber. 2,2-dihydroxy-4,4-dimethoxbenzophenone, as UV-absorber was applied to 100% cotton fabric. Reagents added in finishing solution were Triton X-100, polyethylene glycol 400, and $MgCl_2{\cdot}6H_2O$, and C.I. Direct Red 81. Both untreated and treated cotton fabrics were exposed to a xenon arc lamp for 20 and 80 hours. UV absorption spectra of finishing solutions and UV transmission spectra of fabrics were measured by the UV/VIS spectrophotometer. The results of this study can be summarized as follows. The results of this study can be summarized as follows. Absorption and the related transmission spectra were modified in a controlled way with UV-absorber. Absorption effect of UV-absorber was improved by adding Triton X-100, PEG 400, and $MgCl_2{\cdot}6H_2O$ in finishing solution. The UV absorption of finishing solution was in the following order: U/D/T/P/M>D/T/P/M> D/T> D/P, D>U/T/P/M>U/T>T/P/M>T. The UV transmittance of cotton fabrics was remarkably decreased by the application of UV-absorber and additives. The UV-cut properties were most improved by the application of U/D/T/P/M.

• 한국분말재료학회지
• /
• 제20권6호
• /
• pp.432-438
• /
• 2013

In this study, analysis on the oxidation behavior was conducted by a series of high-temperature oxidation tests at both $800^{\circ}C$, $900^{\circ}C$ and 1000 in the air with sintered STS 316L. The weight gain of each oxidized specimen was measured, the oxidized surface morphologies and composition of oxidation layer were analyzed with Scanning Electron Microscope-Energy Dispersive x-ray Spectroscopy (SEM-EDS), finally, the phase change and composition of the oxidized specimen were shown by X-Ray Diffraction (XRD). As a result, the weight gain increased sharply at $1000^{\circ}C$ when oxidation test was conducted for 210 hours. Also, a plentiful of pores were observed in the surface oxidation layers at $900^{\circ}C$ for 210 hours. In addition, the following conclusions on oxidation behavior of sintered STS 316L can be obtained: $Cr_2O_3$ can be formed on pores by influxing oxygen through open-pores, $(Fe_{0.6}Cr_{0.4})_2O_3$ can be generated on the inner oxidation layer, and $Fe_2O_3$ was on the outer oxidation layer. Also, $NiFe_2O_4$ could be precipitated if the oxidation time was kept longer.

• Journal of the Korean Wood Science and Technology
• /
• 제22권4호
• /
• pp.26-36
• /
• 1994

The comparative wood anatomy of 1 species belonging to genus Myrica of Myricaceae, 9 species to genus Populus and 8 species to genus Salix of Salcaceae, occurring in Korea, was described and coded according to IAWA list(Wheeler, 1989). Myrica rubra. of Myricaceae is a typical diffuse-porous wood with numerous vessels per $mm^2$ and its pores are mainly angular in outline. Vessels scalariform perforation plates with a few bars, very small inter vessel pits; axial parenchyma abundant, diffuse or diffuse-in-aggregates which is distinct and easily observed on cross section; rays 1-3 seriate, Kribs' heterogeneous I or II types, frequently contains rhomboidal crystals; Dark pigmented substances included in some rays and axial parenchyma. Salicaceae, a typical diffuse porous wood, has mainly radial pore multiple, large intervessel pits, distinct alternate pits, simple perforation plates, ray-vessel pits with circular large pits, uniseriate rays, marginal parenchyma composed of 1-2 layers. In some species, ray parenchyma contain crystals. Populus and Salix wood can be distinguished from one another by the following characters. Pores of Populus woods almost angular in outline. Uniseriate homogeneous rays slightly higher than Salix and long linear on tangential section. Whereas Salix woods appear the pores almost oval, uniseriate heterogeneous rays, which are smular narrow fusiform on tangential section and lower in height than Populus.

• Restorative Dentistry and Endodontics
• /
• 제12권1호
• /
• pp.65-76
• /
• 1986

Carious dentin can be classified, on the basis of their clinical characteristics, into three groups; sound, sclerotic and active carious dentin. Active carious dentin differs from sclerotic dentin by its abscence of variable bacteria within tubles and amount of chemical content. But the apatite molecules of active carious dentin are not fully studied. The purpose of this study was to observed the physico-chemical characteristics of deep carious dentin. The samples of sound, sclerotic and active carious dentin were obtained respectively from 300 freshly extracted carious teeth. Bacterial-rich zone of superficial soft dentin layer was removed with hand instruments from all samples in advance. The samples were powdered and sieved (200 mesh) before analyses. Identification and estimation of the crystallinity of the samples were carried with X-ray diffraction and infrared absorption analyses. Measurements were made on a Rigaku Denki (Rigaku, geiger flex III, Japan) X-ray diffractometer with Cu-target at 30 Kv, 30 mA and are traced on a monochromatic tracer. Infrared absorption analysis was made on FT-IR spectrophometer (Nicolet Instrument Co.) using KBr pellets containing the samples and was recorded on data process (Model IR-80. Nicolet Instrument, Co). The following conclusions were as follows; 1. The nature of the main inorganic structure of sound, sclerotic and active carious dentin proved to be hydroxyapatite. 2. It was difficult to determine the identification due to their crystallinity of sound, sclerotic and active carious dentin. But sound dentin was the highest in crystallinity among them. 3. The magnesium whitlockite was to be found in active carious dentin, but not in sound and sclerotic dentin. 4. The carbonate content was highest in sound dentin, but the lowest was in active carious dentin.