• Bulletin of the Korean Chemical Society
• /
• v.24 no.5
• /
• pp.610-612
• /
• 2003

Octanethiol ($CH_3(CH_2)_7SH$) based self-assembled monolayer on Cu(111) in ultra-high vacuum has been examined using x-ray photoelectron spectroscopy (XPS), temperature programmed desorption (TPD), intergrated desorption mass spectrometry (IDMS), and contact angle analysis. The results show that the octanethiolate monolayers similar to those on gold are formed on Cu(111). The monolayers are stable up to temperatures of about 480 K. Above 495 K the monolayers decompose via the γ-hydrogen elimination mechanism to yield 1-octene in the gas phase. The thiolate head groups on the copper surface change to Cu₂S following the decomposition of hydrocarbon fragments in the monolayers at about 605 K.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.373-376
• /
• 1997

Diamond thin films were deposited on P-type(100) Si wafers using MPECVD. Prior to deposition, mechanical scretching was done to improve density of nucleation sites with diamond paste of 0.25${\mu}{\textrm}{m}$ size. Diamond films were deposited under the following conditions : methane concentration of 0.5~5%, oxygen concentration of 0~70%, process pressure of 70Torr, process temperature of 900~95$0^{\circ}C$, and deposition time 5hrs. The changes of the morphology and the growth rates of the deposits with the experimental conditions are expriend by Scanning Electron Microscopy. Raman Spectroscopy and X-ray Diffraction method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.246-249
• /
• 1997

Diamond thin films were deposited on Si wafer from a mixture of CE$_4$ and H$_2$ by RF Plasma CVD. The films were de77sited under the following conditions : discharge power of 500w, H$_2$ flow rate of 30sccm, chanter pressure of 20∼50Torr, and CH$_4$ concentration of 0.5∼2%. The deposition time was 30∼40 hours because of low growth rate. The deposited films were characterized by Scanning Electron Microscopy and X-ray Diffraction method.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.338-339
• /
• 2006

The solubility of Cr in cubic carbides in the systems WC-Co-TaC and WC-Co-ZrC has been determined using equilibrium samples. Thermodynamic calculations were used to design the alloys through extrapolations of Gibbs energy expressions. The alloys were designed to have a microstructure containing the following phases: WC, liquid, $M_7C_3$, graphite and cubic carbide. The alloys were investigated using scanning electron microscopy and analyzed using energy-dispersive X-ray spectrometry. The present work shows how the Cr solubility depends on which cubic carbide former that is present. The WC-Co-Cr-Zr alloy has no detectable amount of Cr whereas the WC-Co-Cr-Ta alloy has 12% Cr in the cubic carbide.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.27-44
• /
• 1994

The purpose of this study was to determine the effects of pH, temperature and time on the synthesis of hydroxyapatite(HAP) by spontaneous precipitation under relatively physiologic condition. Specimens were obtained from aqueous system with various pH, temperature and experimental time. Chemical composition, crystallographic structure and crystallinity of the synthetic HAP were evaluated by Infrared spectroscopy and powdered X-ray diffraction method. The following results were obtained. 1. No precipitate was obtained under pH 5.5. 2. All the specimens were concluded as HAP except one that was obtained under the condition of pH 6.5, $25^{\circ}C$ and 1 day. It was concluded as dicalcium phosphate dihydrate(DCPD). 3. The crystallinity of HAP was enhanced by increases in pH, temperature and time of the preparation. But, the crystallinity of the synthetic HAP was lower than that of the mineral HAP. 4. Intermediates such as DCPD and octacalcium phosphate were formed on the process of the synthesis of HAP.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.4
• /
• pp.395-399
• /
• 2008

The purpose of this paper is to investigate the fabrication of P(VDF-TrFE) organic thin films through the vapor deposition method and the piezoelectric properties of the organic thin films thus produced. Vapor deposition was performed under the following conditions: the working temperature, and the pressure of reaction chamber were $300^{\circ}C$, and $2.0{\times}10^{-5}$ Torr, respectively. The molecular structure and crystallinity of the evaporated organic thin films were evaluated by using a FT-IR (Fourier-Transform Infrared spectroscopy) and XRD (X-ray diffractometry), The results showed that crystallinity increased with an increase in the substrate temperature. When the P(VDF-TrFE) organic thin films were fabricated by increasing the substrate temperature, its piezoelectric coefficient($d_{33}$) increased.

• Journal of Chest Surgery
• /
• v.5 no.2
• /
• pp.135-140
• /
• 1972

Papilloma of the upper respiratory tract, particularly larynx and vocal cords are relatively common disease. However, solitary papilloma of the bronchus is extremely rare condition and only a handful cases were reported in the literature. The patient is a 39 year old housewife who has been suffering from productive cough and occasional hemoptysis in the past one year. X-ray of the chest showed complete atelectasis of the right upper lobe. Bronchography revealed a hemispherical protruding mass in the right main bronchus with complete occlusion of the upper lobe bronchus. Bronchoscopy showed a whitish friable mass in the lumen of the right main bronchus biopsy of which was reported as benign papilloma. Right upper lobectomy together with wedge resection of the portion of right main bronchus to include the tumor was done. Cut-edges of the bronchus were stitched together with interrupted fine dacron sutures. During this procedure, right main bronchus was gently clamped with non-crushing Satinsky type clamp. Patient has had uneventful recovery from surgery and was discharged without symptom. Patientis doing well three months following the operation.

• Journal of Chest Surgery
• /
• v.3 no.2
• /
• pp.143-148
• /
• 1970

Bleomycin is known as a antibiotic agent for malignant tumors especially sguamous cell carcinoma. We have treated 2 cases of malignant tumors, each one esophageal and lung carcinoma with bleomycin, 630 mg and 510 mg respectively. In case of esophageal carcinoma. the subjective symptoms such as dysphagea and swallowing disturbance are temporally relieved, but the irregular filling defect is not significantly changed in esophagogram. In case of lung carcinoma, the atelectasis of right upper lobe on chest X-ray was slightly regressed in its size without effective improvement of subjective symptoms. However, following additional radioactive $^60{Co}$ irradiation therapy (5200r), marked regression of tumor density and aeration of right upper lobe was observed. But 2 weeks later of ceasatioil of irradiatio:J, atelectasis of right upper lobe was again developed. Fever, anorexia, headache and eruption were developed during the treatmeat with bleomycin in both cases but the sign or symptoms of hone marrow depression, renal or liver damage were not noted.

• Journal of Welding and Joining
• /
• v.16 no.3
• /
• pp.121-128
• /
• 1998

The degradation of mechanical properties in the high nitrogen steel HN3 developed for nuclear fusion reactor has been evaluated quantitatively using the small punch(SP) test, X-ray diffraction (XRD) analysis has also been conducted to identify carbides or nitrides precipitated on grain boundaries of the heat treated samples. Mechanical properties of the steel HN3 significantly decreased with increasing heat treatment time and temperature or with decreasing testing temperature. Combination of XRD and metallurgical observation, revealed that the material degradation in the thermally aged steel was caused by precipitation of carbides on the grain boundaries. While the weld metal showed the lowest mechanical properties among various microstructures in GTA weldments. By combining SP test and XRD analysis, cryogenic fracture behaviors and aging degradation for high nitrogen steel could be successfully evaluated in nondestructive manner.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.7
• /
• pp.748-752
• /
• 2001

Alkanethiols (CH3(CH2)n-1SH) based self-assembled monolayers (SAMs) on the clean copper surfaces have been examined for n = 4, 8, and 16. Using X-ray photoelectron spectroscopy (XPS) and contact angle analysis, it is found that alkanethiolate monolayers similar to those on gold are formed on clean copper surfaces. The monolayers are stable in air up to about 140 $^{\circ}C.$ Above 160 $^{\circ}C$ the monolayers begin to desorb through the oxidation reaction of the thiolate to sulfonate, with the alkyl chains remaining intact. Following this desorption step, the copper surface has begun to oxidize to CuO at about 180 $^{\circ}C$.