• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.530-533
• /
• 2005

A raw signal simulator for synthetic aperture radar (SAR) is a useful tool for the design and implementation of SAR system. Also, in order to analyze and verify the developed SAR processor, the raw signal simulator is required. Moreover, there is the need for a test system to help designing new SAR sensors and mission of SAR system. The derived parameters of the SAR simulator also help to generate accurate SAR processing algorithms. Although the ultimate purpose of this research is to presents a general purpose SAR simulator, this paper presents a SAR simulator in frequency domain at the first step. The proposed simulator generates the raw signal by changing various simulation parameters such as antenna parameters, modulation parameters, and sampling parameters. It also uses the statistics from an actual SAR image to imitate actual physical scattering. This paper introduces the procedures and parameters of the simulator, and presents the simulation results. Experiments have been conducted by comparing the simulated raw data with original raw SAR image. In addition, the simulated raw data have been verified through commercial SAR processing software.

• 한국군사과학기술학회지
• /
• 제26권4호
• /
• pp.324-334
• /
• 2023

In this paper, the target simulator for RF signals was developed by using VST(Vector Signal Transceiver) and set by real-time signal processing SW programs. A function to process RF signals using FPGA(Field Programmable Gate Array) board was designed. The system functions capable of data processing, raw signals monitoring, target signals(simulated range, velocity) generating and RF environments data analyzing were implemented. And the characteristics of modulated signal were analyzed in RF environment. All function of programs for processing RF signal have options to store signal data and to manage the data. The validity of the signal simulation was confirmed through verification of simulated signal results.

• 한국항해항만학회지
• /
• 제31권9호
• /
• pp.763-769
• /
• 2007

A narrow loop noise bandwidth method is desirable to reduce the error of raw measurements due to the thermal noise. However, it degrades the performance of GPS initial synchronization such as mean acquisition time. And it restricts the loop noise bandwidth to a fixed value determined by the lower bound of the allowable range of carrier-to-noise power ratio, so that it is difficult to optimally track GPS signal. In order to make up for the weak points of the fixed-type narrow loop noise bandwidth method and simultaneously minimize the error of code and carrier measurements, this paper proposes a stepwise-type adaptive bandwidth algorithm for DGPS reference receivers. In this paper, it is shown that the proposed adaptive bandwidth algorithm can provide more accurate measurements than those of the fixed-type narrow loop noise bandwidth method, in view of analyzing the simulation results between two signal tracking algorithms. This paper also carries out sensitivity analysis of the proposed adaptive bandwidth algorithm due to the estimation uncertainty of carrier-to-noise power ratio. Finally the analysis results are verified by the experiment using GPS simulator.

• 한국전자파학회논문지
• /
• 제24권3호
• /
• pp.299-309
• /
• 2013

고해상도 위성 SAR 영상은 주파수 특성, 안테나 설계 변수, 시스템 내부 잡음 및 간섭 신호에 영향을 많이 받으며, 특히 표적의 RCS(Radar Cross Section)에 따라 표적 특성의 품질이 달라지기 때문에 영상 예측을 위한 시뮬레이션이 복잡해진다. 본 논문에서는 STK(Systems Tool Kit)과 매트랩을 결합하여 작성한 SAR 운용 시뮬레이터를 구축하고, 추출된 데이터를 적용하여 SAR 시뮬레이션을 수행한다. 점 표적의 품질을 판별할 수 있는 중요 변수 특성을 분석하며, 향후 위성 SAR 영상의 검보정에 활용할 수 있음을 보인다. 또한, 위성의 궤도 위치에 따라 변화하는 표적의 RCS를 적용하고, 발생 가능한 RF 간섭 신호를 반영하여 SAR 영상에서의 표적물 품질변화 예측을 수행할 수 있는 방안을 제시한다.

• 대한기계학회논문집B
• /
• 제26권11호
• /
• pp.1559-1569
• /
• 2002

In order to investigate the characteristics of electromagnetic flowmeter in two -phase flow, an AC electromagnetic flowmeter was designed and manufactured. In various flow conditions, the signals and noises from the flowmeter were obtained and analyzed by comparison with the observed flow patterns with a high speed CCD camera. The experiment with the void simulators in which rod shaped non-conducting material was used was carried out to investigate the effect of the bubble position and the void fraction on the flowmeter. Based on the results from the void simulator, two -phase flow experiments encompassed from bubbly to slug flow regime were conducted. The simple relation $\Delta$ $U_{TP}$ = $\Delta$ $U_{SP}$ (l-$\alpha$) was verified with measurements of the potential difference and the void fraction. Due to the lack of homogeneity in a rent two -phase flow, the discrepancy between the relation and the present measurement was slightly increased with void fraction and also liquid volumetric flux jf. Whereas there is no difference in the shape of the raw signal between single-phase flow and bubbly flow, the signal amplitude for bubbly flow is higher than that for single -phase flow at the same water flow rate, since the passage area of the water flow is reduced. In the case of slug flow, the phase and the amplitude of the flowmeter output show dramatically the flow characteristics around each slug bubble and the position of a slug bubble itself. Therefore, the electromagnetic flowmeter shows a good possibility of being useful for identifying the flow regimes.ul for identifying the flow regimes.

• International Journal of Automotive Technology
• /
• 제6권2호
• /
• pp.107-117
• /
• 2005

A distributed hardware-in-the-loop simulation (HILS) platform is developed for designing an automotive engine control system. The HILS equipment consists of a widely used PC and commercial-off-the-shelf (COTS) I/O boards instead of a powerful computing system and custom-made I/O boards. The distributed structure of the HILS system supplements the lack of computing power. These features make the HILS equipment more cost-effective and flexible. The HILS uses an automatic code generation extension, REAL-TIME WORKSHOP$^{ (RTW$^{) of MATLAB$^{ tool-chain and RT-LAB$^{, which enables distributed simulation as well as the detection and generation of digital event between simulation time steps. The mean value engine model, which is used in control design phase, is imported into this HILS. The engine model is supplemented with some I/O subsystems and I/O boards to interface actual input and output signals in real-time. The I/O subsystems are designed to imitate real sensor signals with high fidelity as well as to convert the raw data of the I/O boards to the appropriate forms for proper interfaces. A lot of attention is paid to the generation of a precise crank/ earn signal which has the problem of quantization in a conventional fixed time step simulation. The detection of injection! command signal which occurs between simulation time steps are also successfully compensated. In order to prove the feasibility of the proposed environment, a simple PI controller for an air-to-fuel ratio (AFR) control is used. The proposed HILS environment and I/O systems are shown to be an efficient tool to develop various control functions and to validate the software and hardware of the engine control system.