DOI QR코드

DOI QR Code

The Development of the Real Time Target Simulator for the RF Signal of Electronic Warfare using VST and FPGA

VST 및 FPGA를 이용한 전자표적 생성 및 신호 모의장치 개발

  • Sanghun Song (Defense Test & Evaluation Research Institute, Agency for Defense Development)
  • 송상헌 (국방과학연구소 국방시험연구원)
  • Received : 2022.12.09
  • Accepted : 2023.07.26
  • Published : 2023.08.05

Abstract

In this paper, the target simulator for RF signals was developed by using VST(Vector Signal Transceiver) and set by real-time signal processing SW programs. A function to process RF signals using FPGA(Field Programmable Gate Array) board was designed. The system functions capable of data processing, raw signals monitoring, target signals(simulated range, velocity) generating and RF environments data analyzing were implemented. And the characteristics of modulated signal were analyzed in RF environment. All function of programs for processing RF signal have options to store signal data and to manage the data. The validity of the signal simulation was confirmed through verification of simulated signal results.

Keywords

References

  1. The Republic of Korea Air Force Headquarters, "Job Training Manual Air Route Communication Maintenance Assistant and Engineer," Republic of Korea Air Force, Korea, Vol. 1, 2002. 
  2. The Republic of Korea Air Force Headquarters, "Air Force Education 0-2-5(Electronic Warfare)," Republic of Korea Air Force, Korea, 2002. 
  3. J. K, et al, "Jamming Technology in Military Communications," Defense Communications, 2009. 
  4. M. K, et al, "Automatic Intrapulse Modulated LPI Radar Waveform Identification," Journal of the Korea Institute of Military Science and Technology, Vol. 12, No. 2, pp. 133-140, 2018. 
  5. B. S, et al, "Design and Response Analysis of Wideband Monopulse Radar System Robust to Noise Jamming Signal," Journal of the Korea Institute of Military Science and Technology, Vol. 21, No. 1, pp. 94-102, 2018.  https://doi.org/10.9766/KIMST.2018.21.1.094
  6. G. L, "Adaptive Synchronous Jamming for Contemporary Multi-mode Radar," Hanyang University Graduated School, 2021. 
  7. G. S, et al, "Design of Amplitude Sampled DRFM System Using Inversion Phase Correction Method," Journal of The Institute of Electronics and Information Engineers, Vol. 56, No. 9, 2019. 
  8. Y. L, et al, "A Study on Jamming Performance Evaluation of Noise and Deception Jammer Against SAR Satellite," Asian and Pacific Conference on Synthetic Aperture Radar, 2011. 
  9. Y. L, et al, "The Jamming Signal Generation using DRFM," IEDC-517-011144, 4Sys-EW-2, Technical Report, 2001. 
  10. X. W, et al, "Evaluation of SAR Jamming Performance," IEEE 2007 International Symposium on Microwave, Antenna, Propagation, and EMC Technologies For Wireless Communications, pp. 1476-1480, 2007. 
  11. W. S, et al, "Research of Pulsed-Doppler Radar Jamming System based on DDS," IEEE International Conference on Computer Science and Automation Engineering, 2012. 
  12. E. O, et al, "Implementation of Doppler Noise Jamming Techniques using DRFM", 20th Signal Processing and Communications Applications Conference, 2012. 
  13. G. S, et al, "Digital Modulation for Radar Jamming," IEE Colloquium on Signal Processing in Electronic Warfare, 1994. 
  14. G. F, et al, "Deception Jamming Against Doppler Beam Sharpening Radars," IEEE Access, Vol. 8, pp. 32792-32801, 2020.  https://doi.org/10.1109/ACCESS.2020.2973191
  15. S. L, et al, "Study on the Method of Polarization Suppression of Cheating Jamming in Pulse Doppler Radar," Journal of Systems Enginnering and Electronics, Vol. 16., No. 2, pp. 310-315, 2005.