• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.56-62
• /
• 2003

In order to actively cope with international changes such as cessation of the Cold War in the twentieth century, the government has been proceeding the unification project between military and commercial specification leading to cost reduction of military supplies as well as to high effectiveness. Among these efforts, the study on raw materials specifications, which seems to have been widely used for military or commercial fields, has been performed. As the result of these studies, we have reformed military standards through surveying and summarizing military, KS and international specifications on raw materials. Consequently, the reduction of costs for the procurement of military supplies and the maintenance of current military specifications is to be expected.

• 한국군사과학기술학회지
• /
• 제4권2호
• /
• pp.130-137
• /
• 2001

In order to actively cope with international changes such as cessation of the Cold War in the twentieth century, the government has been proceeding the unification project between military and commercial specification leading to cost reduction of military supplies as well as to high effectiveness. Among these efforts, the study on raw materials specifications, which seems to have been widely used for military or commercial fields, has been performed. As the result of these studies, we have reformed military standards through surveying and summarizing military, KS and international specifications on raw materials. Consequently, the reduction of costs for the procurement of military supplies and the maintenance of current military specifications is to be expected.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.423-428
• /
• 2015

The machinability of materials is an important factor in engineering applications. Many ceramic components that have complex shapes require machining, typically using diamond tools, which leads to high production cost. Machinable ceramics containing h-BN have recently been developed, but these materials are very expensive because of high cost of raw materials and machining. Therefore the development of low-cost machinable ceramics is desirable. In this study, mullite-$ZrO_2$ ceramics were prepared additions of $Al_2TiO_5$. $ZrSiO_4$, $Al_2O_3$, and $Al_2TiO_5$ powders mixed at various molar ratios with sintering at 1400, 1500, and $1600^{\circ}C$ for 1 hr. Phase formation and microstructure of the sintered ceramics were observed by XRD and SEM, respectively. The machinability of each specimen was tested using the micro-hole machining method. The machinability results show that the ceramics sintered at temperatures over $1500^{\circ}C$ can be used as good low-cost machinable mullite-$ZrO_2-Al_2TiO_5$ ceramics.

• Journal of Electrochemical Science and Technology
• /
• 제12권4호
• /
• pp.398-405
• /
• 2021

To fabricate a full-scale pilot model of the cost-effective Na-(Ni,Fe)Cl₂ cell, a Na-beta-alumina solid electrolyte (BASE) was developed by applying a one-step synthesis cum sintering process as an alternative to the conventional solid-state reaction process. Also, Fe metal powder, which is cheaper than Ni, was mixed with Ni metal powder, and was used for cathode material to reduce the cost of raw material. As a result, we then developed a prototype Na-(Ni,Fe)Cl₂ cell. Consequently, the Ni content in the Na-(Ni,Fe)Cl₂ cell is decreased to approximately (20 to 50) wt.%. The #1 prototype cell (dimensions: 34 mm × 34 mm × 235 mm) showed a cell capacity of 15.9 Ah, and 160.3 mAh g^-1 (per the Ni-Fe composite), while the #2 prototype cell (dimensions: 50 mm × 50 mm × 335 mm) showed a cell capacity of 49.4 Ah, and 153.2 mAh g^-1 at the 2^nd cycle.

• 펄프종이기술
• /
• 제36권4호
• /
• pp.1-8
• /
• 2004

Linerboards and corrugating mediums are being produced using recycled old corrugated containers (OCC) as major raw materials. The utilization rate of recycled fibers is ex­pected to increase further in the future to reduce raw material cost. Use of recycled fibers as raw materials for linerboard, however, causes many problems for papermakers. As the utilization rate of recycled fiber and number of recycling of fibers increases, quality and process problems including strength reduction and deterioration of machine runn­ability will increase. To overcome the problem of strength reduction associated with the use of recycled fibrous materials for producing quality linerboards, diverse extensive research efforts and new technological approaches have been taken. In this study, disintegration characteristics of aee was evaluated by determining the unslushed contents. The amount of unslushed content of KOCC was lower than AOCC. But contaminants content of KOCC was higher than AOCC. As the consistency in disintegration increased, the amount of unslushed fiber content decreased.

• 한국건설관리학회논문집
• /
• 제24권6호
• /
• pp.66-73
• /
• 2023

건설 프로젝트는 기획부터 완공까지 공사비 예측, 확인, 그리고 정산 단계로 이루어진다. 건설원자재 평균 가격은 변동성을 지닌다. 하지만 건설 프로젝트의 자재비 산정은 계획단계 시점의 시세를 반영하여 결정되기 때문에, 시공단계에서 자재가 투입될 시점의 시세 변동에 따라 예상한 가격과 차이가 날 수 있다. 건설 산업은 건설원자재 가격 변동으로 인한 수요예측 실패, 프로젝트 비용변경으로 인한 사용자 비용 증가, 예측 체계성 부족으로 인한 손실이 발생한다. 이에 따라 건설원자재 가격 예측의 정확도 개선이 필요하다. 본 연구는 Data Refactor 기법의 개선을 통해 건설원자재 가격 예측 및 적용성 검증을 목적으로 한다. 건설원자재의 가격 예측의 정확도를 높이기 위하여 기존의 데이터 리팩토 간의 저·고빈도의 분류 및 ARIMAX 활용법을 빈도 위주 및 ARIMA 기법 활용으로 개선하여 건설원자재 목재, 시멘트 등 6개 품목의 단기(미래 3개월), 중기(미래 6개월), 장기(미래 12개월) 가격을 예측하였다. 분석한 결과 개선된 Data Refactor 기법을 기반으로 한 예측값이 오차는 줄었고 변동성은 확장되었다. 따라서, 본 연구에서 제안된 Data Refactor 기법을 통해 건설원자재 가격을 더 정확하게 예측하여 예산을 효과적으로 관리할 수 있을 것으로 기대된다.

• 대한안전경영과학회지
• /
• 제6권2호
• /
• pp.155-165
• /
• 2004

It is needed to develop on-line real time management and RFID-PPS(Radio Frequency Identification-Pallet Pool System) by putting information technology. Additionally, it is possible to figure out the flow of all the materials loaded on the RFID pallet; product, material, raw material immediately, so that epoch-making management is possible and it contributes to the reduction of logistics cost because there are little loss or outflow of pallet. The materials flow is getting speedy and inventory is decreasing in the logistics process, and also bad inventory and loss problems are prevented. As a result, not only logistics cost of company but also national logistics cost is decreased. Thus it contributes to the strength of national competitiveness.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권6호
• /
• pp.753-760
• /
• 2007

For protection of the cylinder wall of the ball mill for grinding raw ore. the inner side of the cylinder is covered with rubber liner. The rubber is easily worn down because the rubber relatively soft compared with raw ore. So the rubber liner in the ball mill cylinder must be replaced almost every year and the cost for replacing rubber liner formidable. In this paper, for reducing or excluding the cost of replacing rubber liner the basalt liner is designed. The basalt materials are generally harder than raw ore and the basalt liner in the ball mill does not wear down and so it can be used almost permanently. The concave surfaces are made on the liner of the ball mill and the liner in the cylinder wall plays also the role of raising the steel balls mixed in the raw ore. The section profiles of the concave surface have an important effect on the performance of the ball mill. The deep concave grooves raise the steel balls to high levels and give the large potential energy to the steel balls impacting to the raw ore. But if the concave grooves are too deep. the steel balls raised too high by the concave grooves fly along the parabolic path and reach to the other side of cylinder wall and so the steel balls do not play the roles of grinding the raw ore. The forces acting to a steel ball in a concave groove of the cylinder liner are also analyzed in this paper. The formulas calculating the height and the impact point of the steel ball are introduced and presented. Based to these formulas, the optimum section profiles of the basalt liner are presented.

• 농업과학연구
• /
• 제49권3호
• /
• pp.397-405
• /
• 2022

Castor oil cake is widely used as a raw material for organic fertilizers (OF) in Korea. Compared to other fertilizer raw materials, it is highly dependent on imports. In terms of replacing raw materials, dehydrated food waste powder (FDP) and castor oil cake have similar nutritional content, and if 30% is replaced, about 20% of the raw material cost can be saved. However, few studies on the effects on crop growth and soil properties when organic fertilizer and dry food waste powder are mixed and applied to the soil have been reported. The effects of an organic fertilizer made by mixing the commercial available organic fertilizer with dehydrated food waste (OF + FDP) on soil properties and the growth of two types of leafy vegetables (lettuce and young radish) were evaluated and compared with the performance of OF. The fresh weights of lettuce and young radish were the highest with OF amendment and stood at 114.3 and 119.0 g·plant^-1, respectively. These were followed by OF + FDP amendment, which produced 103.1 and 109.6 g·plant^-1, respectively. Compared to the control, OF and OF + FDP increased the lettuce fresh weights by about 69% and 52%, respectively, while the fresh weights of the radish were increased by about 223% and 207%, respectively. The soil pH, EC, total carbon content, and organic matter content in OF and OF + FDP increased. The mixture of dehydrated food waste powder and organic fertilizers is expected to improve soil quality and facilitate stable production of crops and contribute to the substitution of imported organic fertilizer raw materials.

• 한국표면공학회지
• /
• 제33권2호
• /
• pp.107-114
• /
• 2000

In this study, we investigated the possibility of the application of the EzROBO system to direct shaping techniques which can make arbitrary shapes without any specific mold. We formed arbitrary shapes using raw materials of EH-260D (Epoxy＋Binder) with the conditions of $250\mu\textrm{m}$ layer thickness, 0.2MPa working pressure, 20mm/sec working velocity, and 1.8mm needle thickness. The developed Spatial Printing Technique showed enhanced working velocity and lower cost than existing 3DP process, and is expected to replace the existing process through the process optimization in the future.