• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.20.1-20.10
• /
• 2018

Background: In the absence of clear guidelines for facial aesthetic surgery, most surgeons rely on expert intuitive judgement when planning aesthetic and reconstructive surgery. One of the most famous theories regarding "ideal" facial proportions is that of the golden proportion. However, there are conflicting opinions as to whether it can be used to assess facial attractiveness. The aim of this investigation was to assess facial ratios of professional black models and to compare the ratios with the golden proportion. Methods: Forty photographs of male and female professional black models were collected. Observers were asked to assign a score from 1 to 10 (1 = not very attractive, 10 = very attractive). A total of 287 responses were analysed for grading behaviour according to various demographic factors by two groups of observers. The best graded photographs were compared with the least well-graded photographs to identify any differences in their facial ratios. The models' facial ratios were calculated and compared with the golden proportion. Results: Differences in grading behaviour were observed amongst the two assessment groups. Only one out of the 12 facial ratios was not significantly different from the golden proportion. Conclusions: Only one facial ratio was observed to be similar to the golden proportion in professional model facial photographs. No correlation was found between facial ratios in professional black models with the golden proportion. It is proposed that an individualistic treatment for each ratio is a rather better method to guide future practice.

• The Research Journal of the Costume Culture
• /
• v.24 no.6
• /
• pp.873-885
• /
• 2016

It is common knowledge that a conventionally woven textile consists of two assemblies of parallel threads (warp and weft), one interlaced with the other at ninety degrees. Where each of the two assemblies is arranged in a particular colour sequence, a check design, known as a 'tartan', may be created. Although similar check-type cloths have been produced worldwide, it is the tartans of Scotland which have received most attention and it is here that a complex set of rules evolved and tartans of different types became associated traditionally with different regions, family groups or 'clans'. There is an impressive array of publications focused on the identification of tartans and their clan associations. This paper explains the nature of tartans, analyses typical surface structures, ratios and proportions, and suggests possible avenues of use for modern designers. The principal sources of data were a collection of tartans held at ULITA - An Archive of International Textiles (University of Leeds, UK) and Stewart's 1974 publication The Setts of Scottish Tartans. Based on the observation that divisions into halfs and thirds were dominant, a series of templates is presented with the intention of developing an awareness among designers that ratios and proportions used in familiar or traditional frameworks can be employed in a modern context.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.356-361
• /
• 1998

Permeable polymer cement concrete in this study is one of the invironment conscious concretes that can be applied at roads, side walks, parking lots, interlocking block and river embankment, etc. In this study, permeable polymer cement concretes using polymer dispersion(St/Ac) with water-cement ratios of 25, 30, 35 and 40%, polymer-cement ratios of 0, 5, 10, 15 and 20%, and a ratio of cement to aggregate (by weight), 1 : 3.5(about 415kg/㎥), 1 : 4.0(about 375 kg/㎥), and 1 : 4.5(about 345kg/㎥) are prepared, and tested for compressive, flexural and tensile strength, and permeability. From the test results, increase in the strengths of permeable polymer cement concrete are clearly observed with increasing polymer-cement ratio, we can obtain the maximum strengths at water-cement ratio of 35%. The optimum permeable polymer cement concrete according to application and location of work can be selected in various mix proportions.

• Polymer(Korea)
• /
• v.33 no.4
• /
• pp.342-346
• /
• 2009

The effects of the monomer ratios on the typical properties of polymer modified mortars that contain styrene and butyl acrylate latexes was investigated. Basic data was also obtained that is necessary for the development of appropriate latexes for cement modifiers. Polymer modified mortars that contain styrene and butyl acrylate latexes polymerized with various monomer ratios were prepared for different polymer-cement ratios. They were then tested to obtain the particle size of the polymer latexes, air contents, water-cement ratios, flexural and compressive strengths, water absorption, and chloride-ion penetration. From the test results, the polymer modified mortars that have styrene and butyl acrylate latexes (with the mix proportions of synthesis having monomer ratios of between 40:60 to 60:40 for the appropriate mix proportions) could be recommended for practical applications. The basic properties of the polymer modified mortars were more affected by the polymer-cement ratio than by the monomer ratio, and were improved over unmodified mortar.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.193-194
• /
• 2019

The purpose of this study is to design the basic mix proportions of antiwashout underwater polymer cement mortar as a repair material. The antiwashout underwater polymer cement mortars are prepared with various mix proportions using three type polymer dispersions without or with antifoamer. From the test results, the whole antiwashout underwater polymer cement mortars can be cast underwater without segregation like plain mortar. It is apparent that the flexural strength of antiwashout underwater SBR cement mortars with antifoamer at polymer- cement ratios of 5% and 10% is higher than that of plain mortar irregardless of a little low compressive strength.

• Journal of the Korea Concrete Institute
• /
• v.18 no.6 s.96
• /
• pp.785-791
• /
• 2006

The purpose of this study is to clarify the effect of the monomer ratio on properties of the polymer-modified mortars based on styrene and butyl acrylate latexes, and to obtain basic data necessary to develop appropriate latexes for cement modifiers. This paper deals with the effects of monomer ratio on the typical properties of the polymer-modified mortars with styrene and butyl acrylate latexes. The polymer-modified mortars using the styrene and butyl acrylate latexes polymerized with various monomer ratios are prepared with different polymer-cement ratios, and tested for the particle size of polymer latexes, air contents, water-cement ratios, flexural and compressive strengths, water absorption, and chloride-ion penetration. From the test results, the polymer-modified mortars using styrene and butyl acrylate latexes with the mix proportions of synthesis having monomer ratios of 50:50 to 60:40 for the appropriate mix proportions can be recommended for practical applications. Their basic properties are greatly affected by the polymer-cement ratio rather than the monomer ratio, and are improved over un-modified mortar.

• Korean Journal of Veterinary Research
• /
• v.36 no.3
• /
• pp.635-646
• /
• 1996

To establish the effective ways to prevent bovine mastitis, the study has been performed to investigate the attributable factors causing down-regulation of immune responses in mammary gland of non-lactating cows. Lymphocytes from peripheral blood and mammary gland secretions(MGS) were obtained from normal healthy cows and mastitic cows, respectively. Cellular immune responses were examined by comparison of proportion of lymphocyte subpopulations using a set of monoclonal antibodies and flow cytometry. The results obtained are as follows. 1. Proportions of peripheral blood lymphocyte subpopulations expressing BoCD2 and BoCD4 molecules were 32.9%, 15.4% in mastitic cows and 43.3%, 28.3% in normal healthy cows, respectively. The ratios of BoCD4 to BoCD8 were 0.76 and 1.47, respectively. 2. Proportions of mammary gland lymphocyte subpopulations expressing BoCD2 and BoCD4 molecules were 18.5%, 8.3% in mastitic cows and 38.2%, 14.2% in normal healthy cows, respectively. The ratios of BoCD4 to BoCD8 were 0.6 and 2.0, respectively. 3. Proportions of T lymphocyte subpopulations from MGS were significantly lower than those from peripheral blood both in mastitic cows and normal healthy cows. However, lymphocyte subpopulations expressing ACT2 and ACT3, which represent activated T suppressor cells, were significantly higher in MGS than those in peripheral blood.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.3
• /
• pp.25-33
• /
• 2013

In this study, the optimum mix proportions of rain garden structure concrete were decided and the mechanical properties were evaluated. Experimental parameters were blast furnace slag, hwang-toh, recycled aggregates and natural jute fibers. The target compressive strength and chloride ion penetration were more than 24 MPa and less than 1000 coulombs, respectively. The response surface method was used for statistical optimization of experimental results. The optimal mixing ratios of the blast furnace slag, hwang-toh, recycled coarse aggregate and jute fiber volume fraction were determined 59.98 %, 8.74 %, 12.12 % and 0.2 %, respectively. The compressive strength, flexural strength and chloride ion penetration test results of optimum mix ratio showed that the 24.56 MPa, 3.88 MPa and 999.08 columbs, respectively.

• KIEAE Journal
• /
• v.3 no.2
• /
• pp.51-58
• /
• 2003

The purpose of this study is to present rational methods of multi-criteria optimization of the shape of energy saving buildings. The object is to determine the optimum dimension of the shape of a building, based on the following criteria: minimum building costs (including the cost of materials and construction) and yearly heating costs. Mathematical model described heat losses and gains in a building during the heating season. It takes into consideration heat losses through wall, roof, floor and windows. Particular attention was paid to have a more detailed description of heat gains due to solar radiation. On the assumption that shape of building is rectangle in order to solve the problem, the proportions of wall length and building height are determined by using non-linear programing methods(Kuhn-Tucker Conditions). The results constitute information for designers on the optimum proportions of wall lengths, height, and the ratios of window to wall areas for energy saving buildings.

• Computers and Concrete
• /
• v.14 no.3
• /
• pp.247-262
• /
• 2014

Partial replacement of Portland cement by slag can reduce the energy consumption and $CO_2$ emission therefore is beneficial to circular economy and sustainable development. Compressive strength is the most important engineering property of concrete. This paper presents a numerical procedure to predict the development of compressive strength of slag blended concrete. This numerical procedure starts with a kinetic hydration model for cement-slag blends by considering the production of calcium hydroxide in cement hydration and its consumption in slag reactions. Reaction degrees of cement slag are obtained as accompanied results from the hydration model. Gel-space ratio of hardening slag blended concrete is determined using reaction degrees of cement and slag, mixing proportions of concrete, and volume stoichiometries of cement hydration and slag reaction. Furthermore, the development of compressive strength is evaluated through Powers' gel-space ratio theory considering the contributions of cement hydration and slag reaction. The proposed model is verified through experimental data on concrete with different water-to-binder ratios and slag substitution ratios.