• International Journal of Safety
• /
• 제8권2호
• /
• pp.20-25
• /
• 2009

In this study, an experiment in the field was performed to analyze the mechanical properties and the influence of steel fiber and silica fume on the rebound ratios of shotcrete. The experimental parameters which are the reinforcing methods (steel fiber, wire mesh), steel fiber contents (0.0%, 0.5%, 0.75%, 1.0%), silica fume contents (0.0%, 10.0%), layer thickness (60 mm, 80 mm, 100 mm), and the placing parts (sidewall, shoulder, crown) were chosen. From the mechanical test, it was found that the flexural strength and toughness is significantly improved by the steel fiber and/or silica fume. According to the results for the side wall in this test, the larger the fiber contents are in case of steel fiber reinforced shotcrete, the less the rebound ratios are within the range of 20-35%, compared to the wire mesh reinforced shotcrte. And also, the reduced rebound ratios were very larger in using steel fiber reinforced shotcrete with silica fume content of 10%, and these results are true of the shoulder and the crown. respectively.

• Earthquakes and Structures
• /
• 제18권6호
• /
• pp.743-752
• /
• 2020

The phenomenon of reflection and transmission of plane waves at an interface between fluid half space and orthotropic piezothermoelastic solid half-space with two-temperature has been investigated. Energy ratios of various reflected and transmitted waves are computed with the use of amplitude ratios. The law of conservation of energy across the interface has been justified. It is found that the energy ratios are the functions of angle of incidence, frequency of independent wave and depend on the different piezothermoelastic material. A piezothermoelastic material has been considered which is in welded contact with water. Variations of energy ratios corresponding to the reflected waves and transmitted waves are computed and shown graphically for the two different models. A particular reduced case of interest is also discussed.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.354-356
• /
• 2015

As domestic recession has had an adverse impact on many Korean companies in Korea, financial soundness has become a critical issues. It is essential to identify financial risk factors to prevent workout as well as to improve the financial condition of domestic construction companies. Therefore, this study derived important management indicators and the financial ratios that belong to each indicator through a comparative analysis between healthy companies and workout companies with financial statement. As a consequence, key financial ratios are derived into 3 of 25 ratios; Equity Ratio in stability indicator, Total Asset Turnover Ratio in activity indicator, and Labor Equipment Ratio in productivity indicator. So, Korean construction firms are required close monitoring these critical financial ratios indicating variation between construction companies which have opposing statuses in finance in order to keep sound financial condition and increase productivity.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.477-482
• /
• 2001

This paper is to study the effect of longitudinal reinforcement ratios and axial deformation on the frame analysis in reinforced concrete(RC) columns and to investigate the effect of confined concrete core, the length-width ratio and longitudinal steel ratios on frame analysis in Concrete-Filled steel Tubular(CFT) columns. An equation if derived to evaluate the modulus of elasticity for core concrete. The 34 reference data have been collected for the purpose and are processed by the mean of a multiple regression analysis technique. The equation and longitudinal reinforcement ratios was applied to RC columns for structural analysis. Then, the difference of beam moment was identified. In general, the results of analysis was indicated reasonable differences in beam moment, in case of longitudinal reinforcement ratios applied to RC columns when compared with the plain concrete columns. In CFT columns the equation was also applied in order to the effect of confined concrete core on structural analysis. Beam moment was increased as volumetric ratio of lateral steel was decreased. The effect of longitudinal steel ratios was investigated in CFT columns and was confirmed beam moment variety. The result was appeared reasonable difference in beam moment as longitudinal steel was increased.

• 대한기계학회논문집B
• /
• 제31권11호
• /
• pp.957-962
• /
• 2007

The flow around a rotating circular cylinder near a plane wall is investigated by the measurement of the lift acting on the cylinder and by the flow visualization using the hydrogen bubble technique in the circulating water tank. The experimental parameters are the rotating direction of the cylinder, the space ratios H/D($H/D=0.05{\sim}0.5$) between cylinder and plane wall and the velocity ratios ${\alpha}({\alpha}=0{\sim}{\pm}2.0)$. In the case of clockwise, the lift on the rotating circular cylinder was increased with the reduction of the space ratios and with the velocity ratios, the upper separation point was more shifted in the rotating direction with them. In the case of anticlockwise, the absolute value of the lift on the rotating circular cylinder was increased with the space ratios and with the velocity ratios, the lower separation point was more shifted in the rotating direction with them.

• Journal of Animal Science and Technology
• /
• 제45권5호
• /
• pp.725-730
• /
• 2003

This study was conducted to evaluate the adequacy of an alternative a.m.-p.m. testing scheme for milk yield in comparison with the official test method based on weighing two milkings within 24 h. A total of 8,309 p.m. milking weights and 6,767 a.m. milking weights from 72 Holstein cows raised at N.L.R.I. were collected between October 2000 and November 2001. Ratios were computes for daily milk yield to a.m. and p.m. milking weights(direct yield ratios) and ratios of a.m. and p.m. milking weights to daily milk yield (inverse yield ratios). Analysis of variance indicated that the milking interval is the most important source of variation for yield ratios. Adjustment factors for estimating daily milk yield from single milking weights were derived through regression analysis of direct and inverse yield ratios on the length of the milking interval. Daily milk yield was estimated more precisely and accurately when adjustment factors were used than when single milking weights were doubled. In conclusion, alternative recording of a.m. and p.m. milking weights led to reliable estimates of milk yields.

• 폴리머
• /
• 제24권5호
• /
• pp.599-609
• /
• 2000

본 연구에서는 불포화 폴리에스테르 수지의 기계적 물성을 증진시키기 위하여 프로필렌글리콜(PG)과 네오펜틸글리콜(NPG)의 몰비를 달리한 불포화 폴리에스테르 수지를 제조하여 경화거동 및 기계적 물성을 조사하였다. 경화거동은 microgel reaction mechanism을 이용하여 설명하였고, NPG 몰비의 증가는 최종 전화율을 증가시키나 경화속도가 늦어짐을 알 수 있었다. 그리고 글리콜 몰비중에서 NPG 몰비의 증가는 굴곡강도, 인장탄성율, 흡수율, 함침성이 증가하였고, 반면에 인장강도, 신율, 굴곡탄성율이 감소하는 경향으로 나타났다. 따라서 중합한 불포화 폴리에스테르 수지에서 PG/NPG 몰비가 0.5/0.5, 0.25/0.75의 영역일 때 섬유강화 플라스틱 복합재료의 물성이 우수한 것으로 관찰되었다.

• 한국식품영양과학회지
• /
• 제27권4호
• /
• pp.618-624
• /
• 1998

This study was conducted to standardize ingredient ratios of wooung kimchi. The ingredient ratios of model wooung kimchiwere determined by the survey in Pusan and Kyungnam province and using the literatures including cooking books. Several kinds of wooung kimchi were prepared by adjusting the ingredient ratios fo the model wooung kimchi within standard deviation. The wooung kimchi with different ingredient ratios were fermented for 6 days at 15$^{\circ}C$. The chemical, microbial and sensory properties of the wooung kimchi were investigated. There was little change in pH but the counts of lactic acid bacteria were decreased, as the ratio of pickled anchovy juice became high. The wooung kimchi adding 9.4% pickled anchovy juice obtained high score in appearance and overall acceptability. The counts of lactic acid bacteria were increased in wooung kimchi adding 5% red pepper powder, and there was obtained better result in appearance, texture and overall acceptability than the other groups. The activity, reducing sugar and counts of lactic acid bacteria were increased, as the ratio of glutinous rice paste became high. The wooung kimchi including 6% glutinous rice paste showed the highest score in overall acceptability. The fermentation process of wooung kimchi accelerated, as the ratio of garlic became high. The wooung kimchi adding 3% garlic showed good appearance and acceptability. In addition to these, the addition of 1.3% ginger ehhanced the appearance, texture and overall acceptability fermented anchovy juice, 5.0% red pepper powder, 6.0% glutinous rice paste, 3.0% crushed garlic and 1.3% crushed ginger.

• 천문학회보
• /
• 제41권1호
• /
• pp.66.2-66.2
• /
• 2016

Red quasars have been suspected to be an intermediate population between merger-driven star-forming galaxies and normal quasars. In this scenario, red quasars are expected to have dusty red color coming from the dust extinction by dust and gas in their host galaxy. However, several studies have proposed different explanation of the red color of red quasars, which are i) a moderate viewing angle between type 1 and 2 quasars, ii) an unusual covering factor of dust torus, and iii) an anomalous synchrotron emission with a peak at NIR wavelength. In this study, we investigate the factor leading to the red color of red quasars by using the line luminosity ratios of the hydrogen Balmer to Paschen series of 11 red quasars. We find the Pb/Hb luminosity ratios of the red quasars are significantly higher than those of normal quasars. Moreover, we compare the Pb/Hb luminosity ratios of the red quasars to the theoretically expected line luminosity ratios computed from the CLOUDY code. We find the line luminosity ratios of the red quasars cannot be explained by the theoretical line luminosity ratios with any physical conditions. We conclude that red color of red quasars comes from dust extinction by their host galaxy. This result is consistent with the picture that red quasars are an intermediate population between the merger-driven star-forming galaxies and normal quasars.

• Journal of Ecology and Environment
• /
• 제43권1호
• /
• pp.14-21
• /
• 2019

Background: Stoichiometry plays an important role in understanding nutrient composition and cycling processes in aquatic ecosystems. Previous studies have considered C:N:P ratios constant for both DOM (dissolved organic matter) and POM (particulate organic matter). In this study, water samples were collected in the six major rivers in Korea and were incubated for 20 days. C:N:P ratios were determined during the time course of the incubations. This allowed us to examine the changes in N and P contents of organic matter during decomposition. Results: POM and DOM showed significant differences in N and P content and the elemental ratios changed during the course of decomposition; DOM showed higher C:N and C:P ratios than POM, and the C:N and C:P ratios increased during decomposition, indicating the preferential mineralization of P over N and N over C. Conclusions: The N and P contents of organic matter in aquatic ecosystem are far from constant and vary significantly during decomposition. More detailed information on the changes in C:N:P ratios will provide improved understanding of decomposition processes and improved modeling of aquatic ecosystems.