• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.853-858
• /
• 2000

According to the results of this research, Production of Fold Mortar Permanent - Form was found to be possible by Mortar. Th FP-Form (Fold Permanent-Form) mortar had compress strength 580kgf/$\textrm{cm}^2$. FP-Form model was made by the result of the first research. There was no minute-crack on beam form and the outer surface of form was very smooth, and those qualities it were made possible hand-mad by experiment. This study is about bond strength progress of FP-Form that developed for the form work rationalization and systematization. The result of this study follows; (1) Fluidity and strength development of mortar which used for FP-Form are satisfied (2) After study on getting good bond strength progress, inside-uneven type presents the better suitableness, and wire netting V-type presents the better shear strength.

• 한국중재학회지:중재연구
• /
• 제24권3호
• /
• pp.125-169
• /
• 2014

In France, arbitration, both domestic and international, has recently been subjected to a major reform. This article discusses the content of the 2011 reform and its aftermath, while putting into perspective the current arbitration act in South Korea, an arbitration-friendly jurisdiction that contemplates reforming its own law. The two legal systems are characterized by their concern for efficiency and rationalization of the arbitration proceedings, through the codification of essential principles previously established by case law and through the promotion of the independence of this ADR vis-$\grave{a}$-vis state courts. The efficiency consideration is strengthened at every stage of the proceedings: from the arbitration agreement often considered valid and rarely challenged, through the proceedings for annulment, recognition and enforcement of the award, up to the judicial assistance of the French supporting judge towards the actual arbitral proceedings. Finally, new concerns are emerging: the increase of transparency and the arbitrability of disputes in some uncertain fields of law.

• 한국해양공학회지
• /
• 제11권4호
• /
• pp.249-261
• /
• 1997

A basic study on the lifting lug design has performed through the rational and systematic process. In order to evaluate the proper design-load distribution around lug eye investigation of contact force between lifting lug and shackle pin is performed using non-linear parametric analysis idealized by gap element models. Gap element modeling and nonlinear analysis procedures are illustrated and discussed based on MSC/NASTRAN. Some analysis and design guides are suggested through the consideration of several important effects such as stress distribution pattern, circumferential contact force distribution along the lug eye face, loading share rate between lug main plate and doubler, effect of loading direction, relation between applied force and deflection and size effect of shackle pin radius. Additionally optimum design studies are performed and general trends according to the variation of design parameters are suggested.

• 한국벤처창업학회:학술대회논문집
• /
• 한국벤처창업학회 2006년도 추계학술발표회
• /
• pp.221-249
• /
• 2006

최근 세계는 경제블록화가 급속한 진행되는 한편 EU가입국의 확대, 중국의 WTO 가입을 비롯하여 정보통신기술의 발달에 따른 무역 패러다임의 변화 등으로 급격한 전환기를 맞이하고 있다. 이러한 무역환경의 변화에 신속히 대처하기 위해 우리나라는 폭넓은 무역지원정책을 추진하고 무역관리체계를 정비하고 있음에도 불구하고 기대만큼의 실효를 거두지 못하고 있으며, 중소기업들은 국내외 경기의 지속적인 침체로 점차 해외경쟁력을 잃어가고 있다. 수출진흥을 위한 정책지원 전략은 무역환경의 변화에 대한 정확한 인식을 바탕으로 하여 무역중소기업의 무역마케팅구조를 근본적으로 개선하는데 궁극적인 목표를 두고 현장실무지원 중심으로 체계적이고 종합적인 수출지원사업 실행방안을 마련하는 일이 우선시 되어야 할 것이다. 따라서 본고에서는 국내 수출중소기업들을 대상으로 설문조사를 실시하여 이를 바탕으로 정부 수출지원사업 활용현황과 무역진흥정책 추진에 따른 향후과제를 검토 분석해보고, 나아가 기업들과 정부 유관기관과의 협력방안을 도출하는데 있다.

• 무역상무연구
• /
• 제12권
• /
• pp.349-376
• /
• 1999

The objective of this paper is to identify the problems of Korean inland transportation system and suggest the improvement plan for reducing the export logistics cost. The results are as follows: (1) Expansion of logistics hub facilities : Logistics hub facilities- integrated freight terminal and ICD, etc. can shorten the empty leg and reduce the logistics cost. (2) Design for CVO(Commercial Vehicle Operations) : CVO has various functions that improve the efficiency and effectiveness of freight transportation. (3) Rationalization of freight transportation industry : In particular, the deregulation of the motor freight industry and the privatization of the railway industry induce the competition among their firms and undercut the transportation rates in the long run. (4) Use of third-party logistics : The benefits of TPL are system reliability, improved customer service, and more efficient cost performance.

• 통상정보연구
• /
• 제10권4호
• /
• pp.513-532
• /
• 2008

The purpose of this study was to analyze which factors have had impacts on extension export insurance charge of Korean export insurance. In order to attainment of this study, an empirical study was proceeded. The export insurance charge was hired as the dependent variable and export insurance premium, insurance compensation charge, export insurance collection charge and export insurance fund were used as independent variables. Data was used for estimation are the annually data from 1969 to 2007. From results of this analysis, we find the hired variables have highly correlation among them and the most influential factor turns out to be export insurance fund. Main results of this study was as follows : i) The export insurance fund must be increased immediately. ii) It is necessary that Korea Export Insurance Corporation give their attention to the compensate amount of export insurance compensation on specific insurance item. iii) It is necessary that Korea Export Insurance Corporation extension the collection efforts of the export insurance. iv) A reasonable raising of export insurance premium need to be done.

• 대한간호학회지
• /
• 제34권5호
• /
• pp.881-890
• /
• 2004

Purpose: The purpose of this study was to explore women caregivers' lived experiences in caring at home for a family member with dementia and to identify conditions that oppress women in the context of family caregiving. Method: This study was conducted within the feminist perspectives using qualitative secondary data. Ten secondary data conveying self reflective contents were selected from the 25 original data obtained in 1999 to 2000. Result: Six themes that emerged from the qualitative thematic content analysis were; androcentric view of family caregiving, undervalued family caregiving by the family members, Self rationalization in the context of family caregiving, family-centric care mechanism, exemplary caring within the family context, and inter-familial relationships among women. Conclusion: The main focus of feminist research is to provide empowerment for the women, research participants and to bring about social change of oppressive constraint through some actions. On the basis of the research findings, therefore, action strategies from feminist perspectives were suggested in some aspects of health care delivery sectors, nursing education and research sectors, and administrative sectors.

• 품질경영학회지
• /
• 제18권1호
• /
• pp.96-115
• /
• 1990

This study suggest a plan for a small and medium auto parts enterprises in Ulsan Industrial Complex to do cooperation activity for management rationalization. To derive the plan, it is considered that characteristics of auto parts industry, existing status of cooperation activity, and faced problems of the small and medium enterprises in Ulsan area. Suggested plan may be well used for basic information of auto parts company's cooperation, and may contribute to expand cooperation activity.

• 한국정밀공학회지
• /
• 제15권6호
• /
• pp.64-78
• /
• 1998

In this paper, on the basis of factory rationalization, the detection and evaluation system of weak assembly process was developed to analyze the processes for improvement of assembly productivity in the current assembly system. Using this detection and evaluation system of weak assembly process, the weak degrees of assembly process were quantitatively calculated. In this system, the improved design rules were constructed for assemblability and the redesign alternative was Presented for elimination of weak Process. After review of the redesign alternative, it was applied to the actual assembly system.

• 자원환경지질
• /
• 제32권1호
• /
• pp.113-121
• /
• 1999

Coal is both source rock and reservoir rock for the coalbed gas. Coalbed gas. Coalbed gas is predominantly methane and has a heating value of approximatly 1000 BTU/$ft^3$. Most of methane is stored in the coal as a monomolecular layer adsorbed on the internal surface of the coal matrix. The amount of methane stored in coal is related to the rank and the depth of the coal. THe higher the coal rank and the deeper the coal seam is presently buried, the greater its capacity to hold gas. Most of Korean Coal is anthracite or metaanthracite, Ro. 3.5~5.5%, and total reserves are 1.6 billion metric tons. The domestic demand for coal was drastically decreased and the rationalization policy carried out from 1987 on coal industry. Now that a large number of coal mines was closed only a few mines continued to produce not more than 5 million tons for year. It is therefore recommended to formulate a strategy to explore and exploit the resources of coalbed methane in Korea.