• 한국항해항만학회지
• /
• 제36권10호
• /
• pp.787-793
• /
• 2012

최적화기법과 선형변환 자동화기법을 도입하여 고속 중형 Ro-Pax선박의 조파저항성능을 향상시킬 수 있는 선형설계방법에 대하여 연구하였다. 최적화기법으로는 SQP(sequential quadratic programming)을 적용하였으며, 선형변환 자동화기법으로는 NURBS(Non-Uniform Rational B-Spline)기법을 적용하였다. 목적함수인 선박의 조파저항성능을 예측하기 위하여 비선형 자유수면 경계조건과 선체의 침하량을 고려한 비점성 유동 해석 기법인 패널법을 적용하였다. 기준선형에 대하여 선형최적화를 수행하였으며 그 결과로 도출된 최적선형에 대하여 모형선을 제작하여 모형시험을 수행하였다. 기준선형과 최적선형에 대한 수치해석을 수행하여 얻은 결과와 최적선형에 대한 모형시험을 수행하여 얻은 결과를 서로 비교하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.47-53
• /
• 2005

본 연구에서는 최적화기법과 전산유체역학의 기술을 이용하여 저항의 관점에서 최적의 형상을 가지는 선형을 개발하는 알고리즘을 개발하였다. 최적화기법으로는 SQP(sequential quadratic programming)을 사용하였으며, 목적함수인 저항을 구하기 위하여 먼저 조파저항은 비선형자유수면경계조건을 고려한 선체주위 포텐셜유동을 계산할 수 있는 수치해석기법인 상방향패널이동법을 사용하였고, 선체에 미치는 전저항을 구하기 위하여 ITTC 1957년 모형선-실선상관곡선을 이용하였다. 선형최적화 과정 중의 선체의 변경이나 계산 격자의 생성은 NURBS(Non-Uniform Rational B-Spline)기법을 사용하여 구현하였다. 이와 같은 방법을 사용하여 개발된 선형최적화 기법의 타당성을 검증하기 위하여 선형이 비교적 잘 알려진 선형인 Wigley선형과 Series 60(C${_B}$=0.6)hull 선형에 대하여 설계속도 Fn=0.316에서 선형최적화를 위한 수치해석을 수행하고 그 결과를 초기선형과 서로 비교하였다.

• 한국항해항만학회지
• /
• 제30권10호
• /
• pp.869-875
• /
• 2006

본 연구에서는 최적화기법과 전산유체역학의 기술을 이용하여 저항의 관점에서 최적의 형상을 가지는 선형을 개발하는 알고리즘을 개발하였다. 최적화기법으로는 SQP(sequential quadratic programming)을 사용하였으며, 목적함수인 저항을 구하기 위하여 먼저 조파저항은 비선형 자유수면 경계조건을 고려한 선체주위 포텐셜유동을 계산할 수 있는 수치해석기법인 상 방향 패널이동법을 사용하였고, 선체에 미치는 전 저항을 구하기 위하여 ITTC 1957년 모형선-실선상관곡선을 이용하였다. 선형최적화 과정 중의 선체의 변경이나 계산 격자의 생성은 NURBS(Non-Uniform Rational B-Spline)기법을 사용하여 구현하였다. 이와 같은 방법을 사용하여 개발된 선형최적화 기법의 타당성을 검증하기 위하여 선형이 비교적 잘 알려진 건형인 Wigley선형과 Series 60(CB=0.6)선형에 대하여 설계속도 Fn=0.316에서 선형최적화를 위한 수치해석을 수행하고 그 결과를 초기선형과 서로 비교하였다.

• 한국항해항만학회지
• /
• 제29권7호
• /
• pp.603-609
• /
• 2005

This paper presents the method for developing an optimum hull form with minimum wave resistance using SQP( sequential quadratic programming) as an optimization technique. The wave resistance is evaluated by a Rankine source panel method with non-linear free surface conditions and the ITTC 1957 friction line is used to predict the frictional resistance coefficient. The geometry of the hull surface is represented and modified using NURBS(Non-Uniform Rational B-Spline) surface patches. To verify the validity of the developed program the numerical calculations for Wigley hull and Series 60 Cb=0.6 hull are performed and the results obtained after the numerical calculations are compared with the initial hulls.

• 대한조선학회지
• /
• 제17권1호
• /
• pp.19-24
• /
• 1980

From the singularity distribution which obtained by minimum wave resistance condition, optimum hull form is obtained by stream line trancing method as Inui and Pien did. Thus obtained hull form has a extruded bottom along a keel line. Therefore the hull form must be modified to have flat bottom. This modification process is conducted by putting a fictitious bottom. It is found out that the wave resistance does not significantly alter at design speed even though the hull form has remarkably changed at the bottom. Therefore flattening the bottom by the effect of depth may be more rational for practical hull form design than ordinary manual hull-form modification.

• 대한수학회보
• /
• 제59권2호
• /
• pp.453-468
• /
• 2022

In this article, we define a module M to be G^z-extending if and only if for each z-closed submodule X of M there exists a direct summand D of M such that X ∩ D is essential in both X and D. We investigate structural properties of G^z-extending modules and locate the implications between the other extending properties. We deal with decomposition theory as well as ring and module extensions for G^z-extending modules. We obtain that if a ring is right G^z-extending, then so is its essential overring. Also it is shown that the G^z-extending property is inherited by its rational hull. Furthermore it is provided some applications including matrix rings over a right G^z-extending ring.

• 대한조선학회논문집
• /
• 제43권5호
• /
• pp.550-559
• /
• 2006

A design procedure for a ship with minimum total resistance was developed using a numerical optimization method called SQP(Sequential Quadratic Programming) and a CFD technique based on the Rankine source panel method with the nonlinear free surface boundary conditions. During the whole optimization process the geometry of the hull shape was represented based on the NURBS(Non-uniform rational B-spline) technique and the modification of the hull shape was controlled using the Bell-shaped distribution function to keep the fairness of the hull shape before and after the hull modification. The numerical analysis was carried out using 4000TEU container ship in the towing tank facility installed in the Pusan national university to know the validity of the developed algorithm for this study. As the results of the numerical analysis it proved that the resistance of the optimized hull is conspicuously reduced in comparison with the original hull in a wave-making resistance point of view.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권1호
• /
• pp.80-85
• /
• 2011

For the assessment of statistical characteristics of wave loads in the real sea state, the probability distribution of wave loads are computed based on the sufficient duration of computations in irregular waves. First of all, the estimation of wave impact loads is well modified applying the displacement potential formulation, which was proposed by one of authors, for solving Wagner's flow model. Consequently, the present computation method is also modified. Prior to the computation in irregular waves, preliminary computation to determine the adequate number of realization of irregular waves is examined. The effect of hull girder vibration on the statistical characteristics is examined by means of the computation with/without hull girder vibration. It is found that hull girder vibration has a certain effect on the probability of occurrence of wave loads. Furthermore, computations taking account of the effect of operation, that is the effects of ship speed and course change, is conducted for the rational evaluation of the effects of hull girder vibration. It is clarified that the effect of operation on the statistical characteristics of wave loads is significant. It is verified that the evaluation without the effect of operation may overestimate the effect of hull girder vibration.

• 대한조선학회논문집
• /
• 제46권2호
• /
• pp.148-154
• /
• 2009

Type A LPG Carrier is the ship using the low temperature independent cargo tank separate from the hull, which has various support structures for laying independent tanks on the hull. In this paper, the direct strength analysis for the support structures has been performed through the direct load analysis, load transfer, stress analysis and strength assessment. Also, a rational modeling method of support structures has been proposed to obtain the dynamic load between the hull and the separate tank.

• 한국해양공학회지
• /
• 제20권3호
• /
• pp.82-87
• /
• 2006

An approach to model a high-speed monohull vessel is introduced. The high-speed monohull form belonging to the category of multihull is drawing new attention, due to the rapidly growing trend of fast passenger ships and military purpose. Multihull forms are much thinner in their overall shape, compared to those of the conventional commercial vessels. Moreover, the parent hull forms are not readily obtainable when a new design is intended, which makes it hard to perform various technical calculations in terms of hull optimization, hydrodynamic computation, structural design, and so forth. In this paper, a parametric technique is used to design a high-speed hull form. To model a hull form, NURBS (Non Uniform Rational B-Spline) representation is used. The goal of research is to provide a fast and convenient tool to design an initial hull form with fewer parameters available in the early design stage. The technique employed in this paper will be applied to the design of multihull forms, such as catamaran, trimaran, and semi-swath.