• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.255-260
• /
• 2003

Most of the fatigue test were achieved in fully reversed condition that mean stress is zero. But, generally, mean stress can not be zero. This research was achieved the bending fatigue test that changes mean stress to spring steel and was studied relation with the mean stress and the fatigue life. The method to search effect about mean stress was extended S-N graph in two cases. One method was extended S-N graph using modified Miner's rule with considering damage. Another was extended using tendency of S-N graph. The exponential value(${\alpha}$) of mean stress-alternating stress equation is converged between the Goodman's and the Gerber's value even if fatigue life increases.

• 한국연소학회지
• /
• 제16권2호
• /
• pp.16-22
• /
• 2011

It is a challenging task to apply large detailed chemical mechanisms of fuel oxidation in simulation of complex combustion phenomena. There exist a few systematic methodologies to reduce detailed chemical mechanisms to smaller sizes involving less computational load. This research work concerns generation of a skeletal chemical mechanism by a directed relation graph with specified accuracy requirement. Two sequential stages for mechanism reduction are followed in a perfectly stirred reactor(PSR) for high temperature chemistry and to consider the autoignition delay time for low and high temperature chemistry. Reduction was performed for the detailed chemical mechanism of n-heptane consisting of 561 species and 2539 elementary reaction steps. Validation results show acceptable agreement for the autoignition delay time and the PSR calculation in wide parametric ranges of pressure, temperature and equivalence ratio.

• 디지털융복합연구
• /
• 제12권11호
• /
• pp.309-316
• /
• 2014

본 논문에서는 초점/비초점 영상에서 깊이 지도를 효율적으로 추출하기 위하여 그래프 컷(Graph Cut)과 이산 웨이블릿 변환(Discrete Wavelet Transform)을 이용한 깊이 지도 생성 기법을 제안한다. 제안하는 방법은 우선 해당 영상을 영역 별로 처리하기 위해 그래프 컷 방법으로 각 픽셀 간의 유사도를 이용하여 분할한다. 그 다음 분할 영역을 레이블링 하여 원 영상의 분할 영역 정보를 생성한다. 그리고 이산 웨이블릿 변환을 이용하여 원 영상 내의 주파수 정보를 나타내는 LL, LH, HH, HL 부대역(Subband)을 생성한다. 마지막으로 4개의 부대역 중 영상의 초점/비초점 영역을 분석할 단서가 되는 HH, HL 대역을 이용하여 주파수 지도를 생성한 뒤 분할 영역에 따라 깊이 정보를 계산함으로써 깊이 지도를 추출한다. 제안하는 방법은 초점 정보인 블러(Blur)의 양에 따라 동적인 깊이의 할당이 가능하여 효율적인 깊이 지도의 생성이 가능하였다. 실험으로 PSNR(Peak Signal to Noise Ratio) 방법을 통해 제안하는 방법의 성능을 평가하였다.

• Journal of Acupuncture Research
• /
• 제25권2호
• /
• pp.139-149
• /
• 2008

Objectives : The 7-zone-diagnostic system is a diagnostic device to predetermine bodily locations by measuring the energy of body. This study was to investigate the relation between the different patterns of Zone 2, 6 of Factor AA in VEGA DFM 722(VEGA, Germany), 7-zone-diagnostic system and clinical parameters. The purpose of this study was relation Korean traditional medicine and western medicine with the data from 7-zone-diagnostic system and the clinical parameters. Methods : This study was carried out with the data from some clinical parameters. We made two groups according to the Factor AA patterns of VEGA DFM 722. The Factor AA pattern of Group A is that the red bar graph of zone 2 was higher than the normal range and the red bar graph of zone 6 was lower than the normal range. The Factor AA pattern of Group B was that the red bar graph of zone 2 was lower than the normal range and the red bar graph of zone 6 was higher than the normal range. After the data from clinical parameters to correspond with conditions of each group were selected, the data from clinical parameters between each gropus analyzed statistically. Results and Conclusions : The values of Direct Bilirubin, GOT, BUN and BUN/Creatinine ratio of Group A were higher than them of Group B. The values of Sodium and Tyroxine of Group A were lower than them of Group B. These results mean that Group A has low energy but has increading tendency. To conclude, it is thought that the red bar graph of zone 2 is higher, the group is the more increasing and the red bar graph of zone 6 is lower, the group has the lower energy.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1051-1060
• /
• 2008

The use of the coal ash for surcharge material, in a view of the environmental aspect, can decrease amount of the reclamation through recycling waste materials as well as prevent a destruction of the ecosystem attributed to sand picking. In addition, it can reduce both unit cost of material and construction expenses. In this study, new construction material as alternative surcharge material using coal ash, which is by-product from thermoelectric power plant, were developed. Mixing ratios of fly ash and bottom ash derived from the coal ash in Samchunpo thermoelectric power plants were determined. Furthermore, mixing conditions depending on the ratios of the cement and gypsum used for chemical additive were determined too. Uniaxial compression strength tests were conducted at different mixing conditions and Design graph of optimum mixing ratio at each required strength for economic efficiency is indicated in this paper.

• Geomechanics and Engineering
• /
• 제28권5호
• /
• pp.463-475
• /
• 2022

In the mine exploitation stage; one of the critical issues is the stability assessment of post-pillars. The instability of post-pillars leads to serious safety hazards in mining operations. The focus of this study is to assess the stability of post-pillars in the 130# stope in the central ore body at Trepça hard rock mine by employing both conventional (i.e., critical span curve) and numerical methods (i.e., FLAC3D). Moreover, a new numerical based index (i.e., Pillar Yield Ratio-PYR) was proposed. The aim of PYR index is to determine a border line between stable, potentially unstable, and failure state of post-pillars at a specific mine site. The critical value of pillar width to height ratio is 2.5 for deep production stopes (e.g., > 800 m). Results showed that pillar size, mining height and mining depth significantly have affected the post-pillar stability. The reliability of numerical based index (i.e., PYR) is verified based on empirical underground pillar stability graph developed by Lunder, 1994. The proposed pillar yield ratio index and pillar stability graph can be used as a design tool in new mining areas at Trepça hard rock mine and for other situations with similar geotechnical conditions.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권6호
• /
• pp.3046-3070
• /
• 2017

Nowadays, the utilization of multiprocessor environments has been increased due to the increase in time complexity of application programs and decrease in hardware costs. In such architectures during the compilation step, each program is decomposed into the smaller and maybe dependent segments so-called tasks. Precedence constraints, required execution times of the tasks, and communication costs among them are modeled using a directed acyclic graph (DAG) named task-graph. All the tasks in the task-graph must be assigned to a predefined number of processors in such a way that the precedence constraints are preserved, and the program's completion time is minimized, and this is an NP-hard problem from the time-complexity point of view. The results obtained by different approaches are dominated by two major factors; first, which order of tasks should be selected (sequence subproblem), and second, how the selected sequence should be assigned to the processors (assigning subproblem). In this paper, a hybrid proposed approach has been presented, in which two different artificial ant colonies cooperate to solve the multiprocessor task-scheduling problem; one colony to tackle the sequence subproblem, and another to cope with assigning subproblem. The utilization of background knowledge about the problem (different priority measurements of the tasks) has made the proposed approach very robust and efficient. 125 different task-graphs with various shape parameters such as size, communication-to-computation ratio and parallelism have been utilized for a comprehensive evaluation of the proposed approach, and the results show its superiority versus the other conventional methods from the performance point of view.

• 한국초등수학교육학회지
• /
• 제23권1호
• /
• pp.119-141
• /
• 2019

본 연구는 우리나라 초등학교 타 교과 수업에서 다루고 있는 통계 그래프를 살펴봄으로써 통계적 소양 함양을 강조하는 실용통계 교육의 관점에서 초등학교 수학 수업에서의 통계 그래프 지도의 개선점과 시사점을 도출하기 위해 수행되었다. 구체적으로, 초등학교 타 교과 교과서 99권을 선정하고, 교과서에 등장하는 통계 그래프 133개를 확인하여 이를 교과별, 종류별로 확인하고 내용 측면과 형태 측면으로 나누어 수학 교과서에 등장하는 통계 그래프와는 이질적인 특성을 가진 사례를 분석하였다. 연구 결과 타 교과 중에서는 사회과에서 통계 그래프가 가장 빈번하게 사용되었고, 막대그래프와 꺾은선그래프, 표, 원그래프 순으로 등장 빈도가 높았다. 내용 측면에서는 수학과와 타 교과 간 계열성 문제, 비율그래프의 등장 시기, 물결선의 활용이, 형태 측면에서는 시각적 표현의 다양성, 복합적 형태의 표현, 특정 교과에만 등장하는 형태의 그래프가 논의할 만한 이슈로 확인되었다. 이를 통해 초등학교 수학 수업에서 통계 그래프를 지도할 때 고려해야 할 시사점을 제언의 형태로 도출하였다.

• 한국농공학회지
• /
• 제17권3호
• /
• pp.3885-3893
• /
• 1975

This work was intended to study the cutting graph and vibratory phenomina of a newly developed mower which may be suitable for mowing agricultural product having large and hard stems like corn and sugar beet. The system consists of cutter-bar having Curvilinear-translation motion, which attached to drag-crank mechanism. The motion of equation developed for experimental vibratory system which equipped with the cutter-bar system was established and the parameters defining the system's vibratory motion were experimentally determined. The optimum balancing weight for the cutter-bar am vibratory characteristics of the cutter-bar for various counterweight were analyzed to provide the design and operational conditions. The results of the study are summarized as follows; (1) The cutting graph by the new cutter-bar system depends upon the magnitude of ratio of forward travel(Vm) to crank speed (R$\omega$); The cutting pitch for Vm/R$\omega$ 1 (whole cycle cutting) and Vm/R$\omega$=2/$\pi$ (a half cycle cutting) are 2$\pi$ Vm and 4R, respectively. (2) The experimental vibratory system had been proved to function adequately so that it can be used in determining the required counterweight to minimize the vibratory motion of cutter-bar. (3) Experimentally determined counterweight to give the least vibratory motion was a little greater than the theoretically determined one. With the optimum counterweight it was possible to reduce up to about 87% of the amplitude without counterweight, which may be considered to be within safe operational region. (4) To avoid the actual operation of the cutter-bar at resonance which occured in low frequency ratio, it was considered that the rotational speed of the crank for a specific design of mower should be determined separately in connection with the desired cutting graph.

• Journal of the Korean Data and Information Science Society
• /
• 제23권1호
• /
• pp.99-111
• /
• 2012

반응변수가 주어졌을 때 설명변수의 조건부 확률분포의 로그-밀도비는 로지스틱회귀모형에서 어떤 설명변수가 어떻게 모형에 포함되는지에 대한 변수선택문제에서 유용한 정보를 제공한다. 설명변수의 조건부 확률분포가 좌우대칭이 아닌 경우 감마분포로 가정하는 것이 적절하고 이 경우 x항과 log(x)항이 모형에 포함되어야 한다. 로그-오즈 그래프는 변수선택문제를 연구하는데 매우 중요한 도구가 된다. 이러한 그래픽적 연구에 의하면, x|y = 0과 x|y = 1의 두 분포가 겹치는 경우에서는 x항과 log(x)항 모두 필요하다. 그리고 두 분포가 분리된 경우에는 x항 또는 log(x)항 중 하나만 필요하다.