• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.219-226
• /
• 2002

Filtration performance of an automotive fuel filter was evaluated based on the theory of Beta ratio. This study also introduced the fuel components' contamination performance test stand incorporating the multi-pass filtration test circuit. The theoretical basis of multi-pass test and test procedure were described in detail. The specification of commercial fuel filter currently available was just the maximum pressure drop across the filter assembly and the holding capacity of contaminants. However, test results revealed that the fuel filter tested could not maintain consistent Beta ratio, that is filtration efficiency, although it had the holding capacity close to the specification. Hence the Beta ratio should be specified in service life. The results also showed that filtration system model should be refined including desorption ratio to estimate the variable Beta ratio in the test.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.45-56
• /
• 2000

An experimental and numerical investigation was made to examine the characteristics of pontoon type floating breakwaters(FBW) in regular waves. Motion responses of FBW and wave transmission coefficients are observed and compared with the results based on the linear potential theory. The linear potential theory is found to be a successful tool to investigate the characteristics of the floating breakwaters. We confirm that there exists a minimum wave transmission coefficient which is a function of wave-length/beam and beam/draft ratio. As beam/draft ratio increases the value of wave-length/beam ratio where the minimum, wave transmission coefficient occurs increases. Excessive mooring stiffness can deteriorate the performance of the floating breakwaters.

• Steel and Composite Structures
• /
• v.22 no.5
• /
• pp.975-999
• /
• 2016

This work investigates a thermomechanical bending analysis of functionally graded sandwich plates by proposing a novel quasi-3D type higher order shear deformation theory (HSDT). The mathematical model introduces only 5 variables as the first order shear deformation theory (FSDT). Unlike the conventional HSDT, the present one presents a novel displacement field which includes undetermined integral variables. The mechanical properties of functionally graded layers of the plate are supposed to change in the thickness direction according to a power law distribution. The core layer is still homogeneous and made of an isotropic ceramic material. The governing equations for the thermomechanical bending investigation are obtained through the principle of virtual work and solved via Navier-type method. Interesting results are determined and compared with quasi-3D and 2D HSDTs. The influences of functionally graded material (FGM) layer thickness, power law index, layer thickness ratio, thickness ratio and aspect ratio on the deflections and stresses of functionally graded sandwich plates are discussed.

• Structural Engineering and Mechanics
• /
• v.75 no.2
• /
• pp.157-174
• /
• 2020

In the present paper, a simple analytical model is developed based on a new refined parabolic shear deformation theory (RPSDT) for free vibration and buckling analysis of orthotropic rectangular plates with simply supported boundary conditions. The displacement field is simpler than those of other higher-order theories since it is modeled with only two unknowns and accounts for a parabolic distribution of the transverse shear stress through the plate thickness. The governing differential equations related to the present theory are obtained from the principle of virtual work, while the solution of the eigenvalue problem is achieved by assuming a Navier technique in the form of a double trigonometric series that satisfy the edge boundary conditions of the plate. Numerical results are presented and compared with previously published results for orthotropic rectangular plates in order to verify the precision of the proposed analytical model and to assess the impacts of several parameters such as the modulus ratio, the side-to-thickness ratio and the geometric ratio on natural frequencies and critical buckling loads. From these results, it can be concluded that the present computations are in excellent agreement with the other higher-order theories.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.976-981
• /
• 1986

The Stress analysis based on the large deflection theory of plate for the large cylindrical storage tank is performed by considering the change of membrane force for the various parameter, i.e., thickness ratio, tank height to diameter ratio, and stretched length. The critical buckling force of cylindrical shell is obtained to investigate the safety of tank shell. By numerical result, the thickness ratio is the important parameter for the membrane force, the height of tank is related linearly with the force, and the stretched length of bottom plate is little influenced. Also, the critical buckling force of cylindrical shell is large than the edge shear force at bottom-shell junction, and hence the consideration of the shell buckling is not required.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.2
• /
• pp.14-21
• /
• 2001

This study aims to analyze visual structure by evaluating the view from five building sites around An-ap pond, and attempt to determine which site commands the best view and will provide the most active use. The results of this study can be summarized as follows: According to the questionnaire survey of experts on the relations of dominancy-subordination(´chu-jong´), vacancy-solidness(´heo-sil´), sparsity-density(´so-mil´) based on ancient oriental Yin-Yang theory and analysis of visual structure on angle of elevation, depression, and the landscape-component ratio to be seen through five building sites around the west of An-ap pond, building site three was selected as the building site which has the best landscape. Therefore, it is estimated that building site three played the role of core-building site. According to the result of correlation analysis, the greater the increased in the component ratio of sky, mountain ,the greater the degree of harmony within the landscape. As well, the degree of harmony increased when the landscape component ratio of a distant view was greater than that of a near view. Moreover, it was proved that the relationships of ´chu-jong´, ´heo-sil´, ´so-mil´ are correlative, not independent.

• Korean Institute of Interior Design Journal
• /
• no.30
• /
• pp.17-27
• /
• 2002

The objective of this study is to evaluate the education contents and method related to Korean culture by comparing history courses in interior design programs of korea to those of three ether countries. For this research, curricula and syllabus of forty interior design programs in domestic and foreign universities have been analysed. The major findings from the survey are summarized as follows: 1. In terms of the tradition contents ratio in history course United States ranks first, Japan second, China third, and Korea last. In case of Korea, the ratio of credits alloted to tradition to total credits is very low and most of the credits are elective courses not requirement ones. 2. History courses of Korean universities are biased to Western styles. 3. In terms of the ratio of contents about neighbor foreign countries'culture in history courses is United States first, Japan second, China third, and Korea last. Therefore it is proved that net only history courses are devaluated, but also the endeavor to find Korean identity is insufficient in the Korean interior design theory education.

• Advances in nano research
• /
• v.8 no.1
• /
• pp.69-82
• /
• 2020

In this study, the free and forced vibration analysis of micro sandwich plate with porous core layer and magneto-electric face sheets based on modified couple stress theory and first order shear deformation theory under simply supported boundary conditions is illustrated. It is noted that the core layer is composed from balsa wood and also piezo magneto-electric facesheets are made of BiTiO₃-CoFe₂O₄. Using Hamilton's principle, the equations of motion for micro sandwich plate are obtained. Also, the Navier's method for simply support boundary condition is used to solve these equations. The effects of applied voltage, magnetic field, length to width ratio, thickness of porous to micro plate thickness ratio, type of porous, coefficient of porous on the frequency ratio are investigated. The numerical results indicate that with increasing of the porous coefficient, the non-dimensional frequency increases. Also, with an increase in the electric potential, the non-dimensional frequency decreases, while and with increasing of the magnetic potential is vice versa.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.211-214
• /
• 2008

Haploid system by anther culture allows the development of homozygous lines when doubled. The response of anther culture to Basta (glufosinate) resistance was investigated on transgenic plants (cv. Anjungbyeo) in order to identify inheritance of bar gene associated with Basta. Most of the regenerated transgenic plants were sterile, and only a few plants produced viable seeds ($A_1$) in the greenhouse. The bar gene was analysis by PCR in basta resistant transgenic plant ($TA_0$). The transgenic seeds ($A_1$) were significantly germinated in Basta solution compared with non-transformed seeds. As a result of anther culture, in regenerated haploid plants, segregation ratio was 1:1 in five of eight cross combinations. In diploid plants, segregation ratio was 1:1 in seven of eight cross combinations. Although there was some differences in the cross combinations, most of the combinations had 1:1 segregation ratio which supports the theory. The difference may be a result of the small sample size or the difference of anther culture response caused by genotypic difference. Hence, when many cross combinations were anther-cultured the results would support the theory.

• Structural Engineering and Mechanics
• /
• v.82 no.4
• /
• pp.477-490
• /
• 2022

This article investigates the nonlinear behavior of two-directional functionally graded materials (TDFGM) doubly curved panels with porosities for the first time. An improved and effectual approach is established based on the improved first-order shear deformation shell theory (IFSDST) and von Karman's type nonlinearity. The IFSDST considers the effects of shear deformation without the need for a shear correction factor. The composition of TDFGM constitutes four different materials, and the modified power-law function is employed to vary the material properties continuously in both thickness and longitudinal directions. A nonlinear finite element method in conjunction with Hamilton's principle is used to obtain the governing equations. Then, the direct iterative method is incorporated to accomplish the numerical results using the frequency-amplitude, nonlinear central deflection relations. Finally, the influence of volume fraction grading indices, porosity distributions, porosity volume, curvature ratio, thickness ratio, and aspect ratio provides a thorough insight into the linear and nonlinear responses of the porous curved panels. Meanwhile, this study emphasizes the influence of the volume fraction gradation profiles in conjunction with the various material and geometrical parameters on the linear frequency, nonlinear frequency, and deflection of the TDFGM porous shells. The numerical analysis reveals that the frequencies and nonlinear deformations can be significantly regulated by changing the volume fraction gradation profiles in a specified direction with an appropriate combination of materials. Hence, TDFGM panels can overcome the drawbacks of the functionally graded materials with a gradation of properties in a single direction.