• 농촌계획
• /
• 제8권2호
• /
• pp.42-49
• /
• 2002

Since legislation of Rural Minor Road Improvement Act 1990, a quarter of its total length had been paved now. However, over 80% of arterial road length(national+provincial roads) had been paved, so, road improvement policy should be focussed on the local road(county+rural minor roads) from now. Generally, in the greater part of coastal plain and island areas, arterial road intensity(total road length/total catchment area) is relatively low, but local road intensity is relatively high. So, in terms of balanced development, much more efforts for rural minor road improvement should be concentrated in coastal plain and islands areas. In Chonnam Province, the maximum differentials of minor rural road improvement ratio was over 20%(the lowest; 14.1% in Goheung, the highest; 35.6% in Goksung) in 1999, but the improvement budget have been allocated in proportion to unpaved road length of each county by the provincial government. However, the differentials should not be fairly narrowed in the near future if the present budget allocation policy be maintained. To solve this problem, target differentials of rural minor road improvement between regions should be set up for each planning year and road improvement budget be allocated according to this policy change.

• 한국자동차공학회논문집
• /
• 제22권7호
• /
• pp.84-89
• /
• 2014

Not only the emission regulation of on-road vehicle engine, but also emission regulation of off-road engine have been reinforced. It is the reason of wide application of emission reduction technology for off-road engines. In this study, optimization of engine parameters (Injector hole number, Injection timing and EGR rate) for reduction of NOx and smoke emissions were conducted by using the analysis of sensitivity and S/N ratio of Taguchi method(DOE). As results, this paper shows optimum value of the parameters for NOx and smoke emission reduction. From the result of reproducibility verification, it is final that the prediction value of NOx and smoke has the error of below 10%. Consequently, the method and results of this study will be used for quantitative reference to EGR control mapping in next study.

• 한국터널지하공간학회 논문집
• /
• 제20권3호
• /
• pp.561-573
• /
• 2018

도로 터널 내의 환기설계를 위해서는 먼저 각 차종별 교통량 구성 비율을 알아야 한다. 일반적인 도로터널의 경우 입구와 출구의 수가 동일하고 일방향이기 때문에 유입된 차종별 구성 비율이 출구에서 나올 때까지 달라지지 않는다. 반면에 네트워크 도로터널의 경우 터널 내의 연결이 복잡한 네트워크로 되어 있기 때문에 차종별 구성 비율이 달라진다. 이에 본 연구에서는 근접행렬을 이용하여 네트워크 도로터널에서 차종별 일교통량 구성 비율을 쉽게 계산할 수 있는 방법을 제시하였다.

• 한국대기환경학회지
• /
• 제24권1호
• /
• pp.72-82
• /
• 2008

Benzene is a very harmful and toxic compound known as human carcinogen by all routes of exposure. Owing to the risky feature of benzene, several countries such as Japan, UK and EU have established the ambient air quality standard and protect from that risk of it. Korea also has designated it as one of the criteria air pollutants and established the concentration limit ($5\;{\mu}g/m^3$) in the air and is going to apply the standard from 2010. Benzene is emitted from various sources such as combustion plants, production processes, waste treatment facilities and also automobiles. Mobile source is known as one of the major emission sources of benzene. In this study, we estimated the domestic emissions of benzene from mobile source and compared the results with those of advanced countries. Mobile source was divided into 2 categories, Le., on-road source and non-road source. The total emissions of benzene from mobile source were estimated as 3,106 tons/yr and 1,612 tons/yr was emitted from on-road source and 1,494 tons/yr was from non-road source. Emission ratio of benzene from on-road source showed that 80.0% was from passenger cars, 10.1% was from taxis, 7.2% was from light-duty vehicles, 2.5% was from heavy-duty vehicles and 0.2% was from buses. In the case of non-road source, the distribution showed that 66.3% was from construction machineries, 14.5% was from locomotives, 11.7% was from ships, 7.1% was from agriculture equipments and 0.5% was from aircrafts. The cold-start emissions were estimated as 942 tons/yr and this value was almost 1.5 times greater than that for hot engine emissions (608 tons/yr). In addition, the fuel-based distribution was 65.9%, 31.1% and 2.8% from gasoline, LPG and diesel vehicles, respectively. The emission ratio from mobile source occupied 65% and 30% of total benzene emissions in USA and UK, respectively. In case of Korea, the emission ratio of benzene from mobile source occupied 29% (15% from on-road source, 14% from non-road source) which showed similar value with UK.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3347-3352
• /
• 2022

In 2013, the International Atomic Energy Agency (IAEA) changed the recommended maximum range of the Emergency Planning Zone (EPZ) to 30 km, and the Kori Nuclear Power Plant in Republic of Korea has also expanded the EPZ to 30 km, following the recommendation. As a result, metropolitan cities with a high population density are contained within the EPZ, and evacuating millions of people should be considered if the 30 km range of evacuation is to take place. This study proposes an evacuation plan using buses (public transportation) to transport people outside of the EPZ, quickly and efficiently. To verify the appropriate mode share ratio of buses that can guarantee the right of vulnerable road users and reduce traffic congestion, a model was built simulating the Kori Nuclear Power Plant in Ulsan Metropolitan City. The scenarios were established by changing the mode share ratio of buses and passenger cars by 10%. Considering a large-scale network analysis at the city level, a cell transmission model was applied to calculate the evacuation time in each scenario. The result shows that the optimal mode share ratio of buses is 40%, with a total evacuation time of 132 min, considering feasible bus fleets in Ulsan Metropolitan City.

• KIEAE Journal
• /
• 제9권1호
• /
• pp.61-68
• /
• 2009

In this study, computer simulation program was using to identify the effects of road traffic noise propagation depending on the road types which are very variable in dense city. To achieve this goal, the roads should adjacent to housing complex were categorized into 7 types and propagation noise level should predicted then after simulation of noise exposure population calculation are carried out. Followings the results. First, the road types producing the higher noise level are R1, R2, R3 and R7. The lowest one is R6. And R4, R5 showed that some amount of noise level reduction. Second. the R6 road type which is tunnel shaped showed the highest noise level reduction in vertical distance gap. Last, the order of noise exposure population ratio is R1>R2>R7 and R6 showed the lowest.

• 한국ITS학회 논문지
• /
• 제19권2호
• /
• pp.18-35
• /
• 2020

차대사람 사고는 인적 요인, 차량 요인, 도로 환경적 요인 등 다양한 요인이 복합적으로 작용하여 발생한다. 도로 환경적 요인은 차대사람 사고 발생에 상당한 영향을 미치는 것으로 알려져 있으며 인적 요인과 차량 요인에 비해 대책 수립이 용이하여 분석 결과의 활용성이 높다. 도로 환경적 요인 중 도로 네트워크 특성은 운전자와 보행자의 행태에 영향을 미치며 두 이동체 간 상충 특성에 관여하여 사고를 발생시킨다. 서울시와 같은 대도시는 지역별 도로 네트워크 형태가 상이하여 사고 모형 구축 시 지역별 특성을 고려할 필요가 있다. 본 연구에서는 도로 네트워크 특성을 반영하기 위해 도로의 위계, 교차로 밀도, 교차로 특성을 변수로 반영하였다. 또한, 공간가중 포아송회귀모형을 사용하여 지역별 차대사람 사고에 대한 도로 네트워크의 영향을 분석하였다. 분석 결과, 도로 네트워크 특성에 따른 사고발생 영향이 유사한 행정동 집단을 선별할 수 있었다. 결과를 바탕으로 지역별 도로 네트워크 특성에 따른 운전자와 보행자의 상충 특성을 검토하고 지역별 개선점을 제시할 수 있었다.

• 한국환경복원기술학회지
• /
• 제1권1호
• /
• pp.18-27
• /
• 1998

To investigate the restoration progression on soil physical properties and vegetation at the surface of logging road affected by timber harvesting operation. This study was carried out at logging roads constructed from 1989 to 1994 in Mt. Baekwoon, Kwangyang, Chollanam-do. Judging from the analysis of soil hardness, there were significant changes in the depth of soil between 5 and 10cm. Soil hardness was recovered from the compacted condition to the natural forest condition after 9 years passed. Soil macroporous ratio (pF2.7) of topsoil was higher than that of deep soil. Soil moisture retention of topsoil was more improved than that of deep soil. From the view of soil bulk density, the necessary time for recovering to the undisturbed condition of forest soil was about 10 years in the logging road left. Soil physical properties such as soil bulk density and porous ratio were recovered as time passed. Improved soil physical properties promoted the plant recovery on the logging road surface. The dominant species on the logging roads were Comus kousa, Prunus sargentii as overstory species, Rubus crataegifolius, Lespedeza bicolor as understory species, and Saussurea gracilis, Pteridium aquilinum var. latiusculum as herbaceous species. The plant recovery of bank-slopes was faster than that of cut-slopes and road surface. In progress of year, average plant coverage were 70 to 90% in cut- and bank-slopes and 30 to 60% on the logging road, surface which was elapsed 9 years after logging road construction. Therefore, additional planting and seeding work could be effective to the soil condition and vegetation restoration.

• 조명전기설비학회논문지
• /
• 제29권6호
• /
• pp.1-7
• /
• 2015

Road lighting is designed with a goal of achieving the related standards on luminance, uniformity ratio and glare. Unless the luminaire with LID which is perfect for road conditions is used, a situation which fails to meet lighting standards may occur. The study examined the relationship of maximum spacing with average road luminance and longitudinal uniformity. Based on the result of the analysis, this study evaluated luminaire with what characteristics are suitable to achieve lighting requirements of the roads and suggested methods of selection for luminaires depending on the size of the road.

• 공업화학
• /
• 제26권2호
• /
• pp.199-204
• /
• 2015

열가소성 차선도료는 세계적으로 가장 보편적으로 사용되고 있는 차선도료이다. 그러나 국내 적용되고 있는 차선도료는 내구성이 1년 밖에 되지 않아 선진외국에 비해 수명(3년 이상)이 상대적으로 짧다. 이를 개선하고자 기존에 사용되고 있는 석유계 수지에 polyolefin 수지를 추가로 첨가하고, LDPE 왁스를 기능성이 부여된 산화 PE 왁스의 대체 사용으로 기존의 열가소성 차선도료의 단점을 보완하였다. 차선도료의 용융점도는 $220^{\circ}C$의 온도에서 분사 도장방식의 최적 점도인 500 cP 이하가 되게 설계하였고, 도료를 도포한 후 반사유리알을 살포하는 시간간격을 1 s로 하여 함침비를 50~60%로 조절하였다. 또한 filler 중 $CaCO_3$의 첨가량을 40 wt% 이하로 하여 유리알 고착비를 향상시켰다. 열가소성 차선도료의 내마모성 평가를 위하여 4가지 조건에서의 재귀 반사성능을 측정하였다. 교통사고 발생 최소화와 운전자의 노령화 등으로 운전자 주행 중 최소 야간재귀 반사성능계수는 $150mcd{\cdot}m^{-2}{\cdot}lux^{-1}$ 이상을 만족하여야 하며, 마모횟수 증가에 따른 야간재귀 반사성능 저하가 가장 적은 TPRM-7를 열가소성 차선도료의 최적 배합비율로 결정하였다.