• Earthquakes and Structures
• /
• v.7 no.6
• /
• pp.1141-1169
• /
• 2014

This study is aimed to investigate the seismic performance of low-rise precast wall system with base isolation. Three types of High Damping Rubber Bearing (HDRB) were designed to provide effective isolation period of 2.5 s for three different kinds of structure in terms of vertical loading. The real size HDRB was manufactured and tested to obtain the characteristic stiffness as well as damping ratio. In the vertical stiffness test, it was revealed that the HDRB was not an ideal selection to be used in isolating lightweight structure. Time history analysis using 33 real earthquake records classified with respective peak ground acceleration-to-velocity (a/v) ratio was performed for the remaining two types of HDRB with relatively higher vertical loading. HDRB was observed to show significant reduction in terms of base shear and floor acceleration demand in ground excitations having a/v ratio above $0.5g/ms^{-1}$, very much lower than the current classification of $0.8g/ms^{-1}$. In addition, this study also revealed that increasing the damping ratio of base isolation system did not guarantee better seismic performance particularly in isolation of lightweight structure or when the ground excitation was having lower a/v ratio.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.8
• /
• pp.598-604
• /
• 1999

This paper describes the research to minimize the film stress and maximize the aspect ratio of photoresist structure, especially about SU-8 for electroplating mold. UV LIGA process using SU-8 allows fabricating high aspect ratio polymer structures. However, it is hard to get fine patterns in the high aspect ratio structures because of high internal stress and difficulty of removing SU-8. The purpose of this paper is to setup the process condition for the obtainment of both low film stress and high aspect ratio and to find design rules that make the pattern be less dependent on stress problem. Firstly, the process of heat treatment and exposure of SU-8 are proposed. These two conditions control the amount of cross-linkage in polymer structure, which is the most important parameter of both pattern generation and remaining stress. Heat treatment is dealed with soft bake and post-exposure-bake. Temperature and time duration of each step are varied with heat treatment condition. Some test patterns are fabricated to evaluate the proposed process. Nickel electroplating is performed with the mold fabricated through the proposed process to confirm the SU-8 as a good electroplating mold.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.667-670
• /
• 1999

There are a large number of deteriorate mechanisms on the reinforced concrete structure and it acts complexly. In case of carbonation, it effected by environmental condition as well as properties of concrete. Most of all, water cement ratio and finishing materials have a great effect on the carbonation velocity. So, it is then aim of this study to suggest elementary data for the prediction of remaining life and the durability design by studying the relationship between carbonation velocity and permeability according to the waste cement ratio and kinds of finishing materials

• Journal of Wetlands Research
• /
• v.14 no.4
• /
• pp.537-545
• /
• 2012

Decay rate and nutrient dynamics during leaf litter decomposition of deciduous Quercus acutissima were compared between Gongju and Jinju for 33 months from December 2008 through March 2011. Percent remaining weight of Q. acutissima leaf litter after 33 months elapsed in Gongju and in Jinju was $41.2{\pm}0.4%$ and $28.3{\pm}0.6%$, and decay constant (k) was 0.39 and 0.61, respectively. Decomposition in Jinju was significantly faster than that in Gongju. This seemed to be related to higher temperature and precipitation in Jinju than those in Gongju during the experimental period. Initial C/N and C/P ratio of Q. acutissima leaf litter was 46.8 and 270.9, respectively. After 33 months elapsed, C/N and C/P ratios in Gongju decreased to 22.0 and 106.8, and those in Jinju decreased to 19.2 and 170.2, respectively. Initial concentration of N, P, K, Ca and Mg in Q. acutissima leaf litter was 8.31, 0.44, 4.18, 9.38, 1.37 mg/g, respectively. After 33 month elapsed, remaining N, P, K, Ca and Mg were 91.0, 85.4, 30.2, 47.9, 11.7% in Gongju, and 67.0, 54.2, 19.9, 30.0, 40.8% in Jinju, respectively. Except for Mg, remaining nutrients of decomposing leaf litter in Jinju were lower than those in Gongju. In case of N and P, initial immobilization was observed, however, only mineralization was observed in K, Ca and Mg during the whole experimental period.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.3
• /
• pp.113-120
• /
• 1998

For a microbial control of a plant pathogenic Pseudomonas syringae, Bacillus sp. strain BT182-3 was isolated. The strain BT182-3 had a growth inhibition against P. syringae not only on agar plate but also on cultured broth. After heat treatment at $40^{\cird}C$ and $80^{\cird}C$ for 30min, the lytic substance from the strain BT182-3 had about 52% remaining activity and 17% remaining activity, respectively. The optimal pH and temperature of the lytic substance was 6.0 and $28^{\cird}C$, respectively. Germination ratio of healthy radish seeds was 87% at $25^{\cird}C$ for 5 days in 0.8% saline, and that of the radish seeds infected with P. syringae was 67%, while that of the radish seeds treated with cultured broth of the strain BT182-3 was 90%. The 5-days healthy radish seedlings were 3.90cm at high and the seedlings infected with P. syringae were 3.06cm at high, while the seedlings treated with cultured broth of the strain BT182-3 were 4.30cm at high. The growth of the radish seedlings infected with P. syringae was inhibited after cultivation for 40days on pots, while the growth of the infected radish seedlings with P. syringae was recovered at stem length, root length and total weight at the same as the healthy seedlings after treatment of a lytic substance from the strain BT182-3.

• Journal of Periodontal and Implant Science
• /
• v.50 no.5
• /
• pp.303-312
• /
• 2020

Purpose: The purpose of this study was to evaluate severe periodontitis with tooth loss as a modifiable risk factor for Alzheimer dementia (AD), vascular dementia (VaD), and mixed dementia (MD) using the National Health Insurance Service-National Health Screening Retrospective Cohort database with long-term follow-up over 14 years. Methods: Multivariate Cox hazards regression analysis was applied to a longitudinal retrospective database, which was updated in 2018, to evaluate the association between severe periodontitis with few remaining teeth and dementia after adjusting for potential risk factors, including sociodemographic factors and comorbid diseases. Results: Among 514,866 individuals in South Korea, 237,940 (46.2%) participants satisfying the inclusion criteria were selected. A total of 10,115 age- and sex-matched participants with severe periodontitis and 10,115 periodontally healthy participants were randomly selected and evenly assigned. The results showed that the risks of AD (hazard ratio [HR], 1.08), VaD (HR, 1.24), and MD (HR, 1.16) were significantly higher in patients with severe periodontitis with 1-9 remaining teeth after adjustment for sociodemographic factors, anthropomorphic measurements, lifestyle factors, and comorbidities. Conclusions: Severe periodontitis with few remaining teeth (1-9) may be considered a modifiable risk factor for the development of AD, VaD, and MD in Korean adults.

• Journal of The Korean Astronomical Society
• /
• v.34 no.1
• /
• pp.41-45
• /
• 2001

We tested the characteristics of the BOAO Medium Dispersion Spectrograph (MDS) such as the CCD capabilities, wavelength shift by gravity direction variation, slit illumination function and efficiency. Then we calculated the appropriate exposure time to obtain the given S/N ratio for several given magnitudes. Also the remaining problems to be improved were discussed.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2263-2266
• /
• 2003

Three-dimensional face recognition algorithm using curvature information representing characteristics of surface form is suggested. The experiment showed more than 90 percent of recognition for the noses which had definite change value of data, and contained much information about surface curvature. Recognition ratio using a contour taken from the remaining part other than the eyes, noses, mouths which are the main components of faces showed the important role, which could be used as the important index information in the three-dimensional face recognition.

• International Journal of Highway Engineering
• /
• v.6 no.3 s.21
• /
• pp.27-35
• /
• 2004

There are two methods in estimating the remaining life of in-service airfield concrete pavement. They are a method simply using the past accumulated traffic and a method using the theoretical mechanistic analysis. Since the former method is somewhat far from the actual condition, the latter method is widely used by most engineers and researchers. The most essential component of the latter method is the fatigue model of the concrete slab. A fatigue model for airfield concrete pavement is developed in this study by a series of fatigue tests using 30 concrete cylinder specimens obtained from a 10 year old in-service airfield concrete slab. Strengths for the stress ratio calculation were obtained from the split tensile test of the cores sliced. Fatigue test mode was repeated split tensile test. The R2 of developed fatigue model was 0.5. Specimens taken from another airport had been tested for validation of the model. The results showed a good fit to the model. It was also found that the fatigue life predicted from the model was a tittle greater when the stress ratio is greater than 80 percent than other fatigue models developed earlier in America.

• Industrial Engineering and Management Systems
• /
• v.12 no.1
• /
• pp.51-62
• /
• 2013

This paper considers a single machine rescheduling problem whose original (efficiency related) objective is minimizing makespan. We assume that disruptions such as order cancelations and newly arrived orders occur after the initial scheduling, and we reschedule this disrupted schedule with the objective of minimizing a disruption related objective while preserving the original objective. The disruption related objective measures the impact of the disruptions as difference of completion times in the remaining (uncanceled) jobs before and after the disruptions. The artificial due dates for the remaining jobs are set to completion times in the original schedule while newly arrived jobs do not have due dates. Then, the objective of the rescheduling is minimizing the maximum earliness without tardiness. In order to preserve the optimality of the original objective, we assume that no-idle time and no tardiness are allowed while rescheduling. We first define this new problem and prove that the general version of the problem is unary NP-complete. Then, we develop three simple but intuitive heuristics. For each of the three heuristics, we find a tight bound on the measure called modified z-approximation ratio. The best theoretical bound is found to be 0.5 - ${\varepsilon}$ for some ${\varepsilon}$ > 0, and it implies that the solution value of the best heuristic is at most around a half of the worst possible solution value. Finally, we empirically evaluate the heuristics and demonstrate that the two best heuristics perform much better than the other one.