• Journal of Biosystems Engineering
• /
• 제6권2호
• /
• pp.48-57
• /
• 1982

In order to improve the quality of traditionally sun-dried red peppers and to increase the efficiency of drying performance, three types of solar dryers were designed and built, and drying performance of the solar dryers was compared to traditional sun drying. Results obtained from the experiment are summarized as fallows: 1. The air temperature and relative humidity profiles over a 8-hour period measured at the specified locations in the drying chamber of solar dryers appeared to have large variation in each dryer. The rate of drying increased with the temperature rise in the drying chamber of the solar dryer. 2. In general. drying with solar dryers proceeded faster than traditional sun drying. With A'-type of solar dryer developed in the second experiment it was possible to dry red peppers in seven days from an initial moisture content of 80% to safe storage conditions. The drying time with the A'-type solar drier was 50% shorter compared to traditional sun drying. 3. Red peppers appeared to have an increasing or constant-rate drying period until the weight of the product was reduced to about one half the initial weight, followed by a falling-rate drying period. When the dried red peppers were exposed to the atmospere during the night, the moisture content increased as much as 6%, which is much higher than for the grains. 4. It was suggested from the experiment that either a heat storage system or a supplemental heating system in the solar dryer was desirable for more efficient drying operation. 5. It was shown that the solar dryer developed in this study may be suitable for drying other vegetables and fishes, and also offered additional advantages of saving in drying time, maintaining sanitation and minimizing contamination by dust, insects and unfavorable weather condition.

• 한국재료학회지
• /
• 제30권6호
• /
• pp.301-307
• /
• 2020

In this study, factors considered to be causes of promotion of densification of sintered pellets identified during phase change are reviewed. As a result, conclusions shown below are obtained for each factor. In order for MA powder to soften, a temperature of 1,000 K or higher is required. In order to confirm the temporary increase in density throughout the sintered pellet, the temperature rise due to heat during phase change was found not to have a significant effect. While examining the thermal expansion using the compressed powder, which stopped densification at a temperature below the MA powder itself, and the phase change temperature, no shrinkage phenomenon contributing to the promotion of densification is observed. The two types of powder made of Ti-silicide through heat treatment are densified only in the high temperature region of 1,000 K or more; it can be estimated that this is the effect of fine grain superplasticity. In the densification of the amorphous powder, the dependence of sintering pressure and the rate of temperature increase are shown. It is thought that the specific densification behavior identified during the phase change of the Ti-37.5 mol.%Si composition MA powder reviewed in this study is the result of the acceleration of the powder deformation by the phase change from non-equilibrium phase to equilibrium phase.

• 한국가스학회지
• /
• 제17권4호
• /
• pp.1-8
• /
• 2013

본 연구에서는 벌크 중합법을 이용한 폴리스티렌 중합공정의 폭주반응에 대한 열적 위험성을 가속속도열량계(ARC)와 소규모 반응열량계(MM)를 이용하여 평가하였다. 당해 중합공정은 반응온도 $120^{\circ}C{\sim}130^{\circ}C$로 운전되어져야 하며, $130^{\circ}C$ 이상의 반응온도에서는 반응 생성물의 급격한 점도 증가로 인하여 반응기의 온도제어 실패에 따른 폭주반응의 위험성이 존재하였다. 또한 당해 중합공정의 반응온도($120^{\circ}C{\sim}130^{\circ}C$)에서 공정운전 초기에 반응기의 냉각실패가 발생할 경우 폭주반응으로 인해 반응기의 온도와 압력이 각각 30 ~ 50분 이내에 약 $340^{\circ}C$, 5.3 bar 까지 급격히 상승하여 반응기의 파열판이 파열되거나 반응기가 폭발할 수 있는 열적 위험성이 높게 나타났다.

• 한국의류학회지
• /
• 제29권12호
• /
• pp.1527-1534
• /
• 2005

본 연구는 아동의 체온조절반응의 특징에 성장환경이 어떠한 영향을 미치는가를 명확히 하기 위해, 한국아동(K group)과 일본아동(J group)의 체온조절반응을 검토하였다. 팬츠 착용의 피험자는 중립환경 $(28.5^{\circ}C)$에서 1시간, 추운환경$(22^{\circ}C)$ 또는 더운환경$(37^{\circ}C)$으로 옮겨져 1시간 동안의 체온조절반응이 검토되었다. 그 결과, 직장온은 환경온이 높아짐에 따라 약간 높아졌으며, K group의 직장온이 J group보다 약간 높았다. 추운환경에서의 손과 발의 피부온은 현저히 저하되었으며, J group보다 K group에서 더 현저히 나타났다. 그리고, 두 group의 절대 국소 증발량은 환경온 $22^{\circ}C$와 $28.5^{\circ}C$에서 비슷한 분포를 나타내는 반면, 환경온 $37^{\circ}C$에서는 J group은 몸 전체에서 발한을 나타냈으나 K group은 사지보다 몸통부위의 발한량이 많았다. 맥박은 환경온의 상승에 따라 높아졌으며, J group의 맥박이 K group보다 더 높았다.

• Journal of Plant Biology
• /
• 제28권3호
• /
• pp.253-259
• /
• 1985

The results of the conducted experiment obtained basic data on seed germination for Phragmites communis and Atriplex gmelini were; Seed germination was not influenced till 0.5% NaCl, but at over 1.0% NaCl it dropped remarkably. The germination limit fro degree of NaCl was 2.0% in Phragmites communis. Atriplex gemelini was 2.5% and in accordance with the increase of the degree of NaCl. Germination speed showed a negative correlation being highly significant and the germination period lengthened. Compared with growing top plants, growth of roots was largely influenced by a high degree of NaCl. In accordance with the rise of temperature, the germination rate, and speed of both plants remarkably increased and the germination period was shortened. Ubride of Atriplex gmelini was germinated at the early days of picking but was not as the passing of the period. The seeds also did not germinated likewise Ubride. By a seedcoat breaking germination became 81%. During 20 min soaking treatment in conc H2SO4 seed germination possibility of 63% was known to be hard. Adequate soaking time in conc H2SO4 was 17.5 min.

• Advances in nano research
• /
• 제16권6호
• /
• pp.579-591
• /
• 2024

This study explained the effects of radiation, magnetic field, and nanoparticle shape on the peristaltic flow of an Upper-Convected Maxwell nanofluid through a porous medium in an asymmetric channel for a better understanding of cooling and heating mechanisms in the presence of magnetic fields. These phenomena are modeled mathematically as a system of non-linear differential equations, that are solved under long-wavelength approximation and low Reynolds number conditions using the perturbation method. The results for nanofluid and temperature described the behavior of the pumping characteristics during their interaction with (the vertical position, thermal radiation, the shape of the nanoparticle, and the magnetic field) analytically and explained graphically. Also, the combined effects of thermal radiation parameters and some physical parameters on pressure rise, pressure gradient, velocity, and heat distribution are pointed out. Qualitatively, a reverse velocity appears with combined high radiation and Grashof number or combined high radiation and low volume flow rate. At high radiation, the spherical nanoparticle shape has the greatest effect on heat distribution.

• 한국해양공학회지
• /
• 제21권3호
• /
• pp.1-7
• /
• 2007

In this study, the heat balance test of an engine was conducted, and the heat released to coolant is measured and corrected using a power adjustment factor for high fuel temperature to simulate heat rejection of the engine. An engine-converter matching simulation program which can compute the engine speed, transmission output speed, transmission input and output power is developed from the vehicle, transmission and engine performance curve. With this information and the engine heat rejection characteristics, the engine and transmission heat rejection rates can be determined at given condition. In analyzing the air mass flow, a sub program computing the air mass flow rate from the equation of the pressure balance between cooling fan static pressure rise and pressure losses of cooling components is developed.

• Journal of Computational Design and Engineering
• /
• 제3권4호
• /
• pp.330-336
• /
• 2016

The present work is concerned with heat and mass transfer of an electrically conducting second grade MHD fluid past a semi-infinite stretching sheet with convective surface heat flux. The analysis accounts for thermophoresis and thermal radiation. A similarity transformations is used to reduce the governing equations into a dimensionless form. The local similarity equations are derived and solved using Nachtsheim-Swigert shooting iteration technique together with Runge-Kutta sixth order integration scheme. Results for various flow characteristics are presented through graphs and tables delineating the effect of various parameters characterizing the flow. Our analysis explores that the rate of heat transfer enhances with increasing the values of the surface convection parameter. Also the fluid velocity and temperature in the boundary layer region rise significantly for increasing the values of thermal radiation parameter.

• 대한기계학회논문집
• /
• 제8권2호
• /
• pp.178-183
• /
• 1984

본 연구에서는 108개의 아르곤 입자가 Lennard-Jones의 포텐셜함수로 상호작 용하고 있는 고밀도 액체계에 높은 전단율울 작요시켜 외력에 의하여 물성의 변화가 일어나고 있는 비평형상태의 액체가 나타내는 현상을 분자동력학을 이용하여 미시적 인 관점에서 고찰하므로써, 높은 전단하중으로 인하여 윤활유 내부에서 전단응력이 발생하고, 이완되는 과정과 이로 인하여 점성이 저하하는등 비평형상태하의 물성변화 를 예측하는데 도움이 되고자 한다.

• 한국축산시설환경학회지
• /
• 제12권1호
• /
• pp.7-12
• /
• 2006

본 연구에서는 육성 비육돈 슬러리를 이용하여 슬러리의 환경조건에 따라 슬러리로 부터의 암모니아 발생 특성을 분석코자 하였다. 슬러리의 온도와 pH를 조절하여 슬러리로부터 발생하는 암모니아 농도를 측정 분석한 결과 슬러리의 온도가 높을수록 슬러리로 부터 발생하는 암모니아 농도는 급격히 증가하는 것으로 나타났고, 슬러리의 pH를 5, 6, 7, 8의 4수준으로 조절하여 각각의 온도에 따라 발생하는 암모니아 농도를 측정한 결과 pH 5, 6에서는 암모니아 가스가 검출되지 않았으나 pH 7, 8에서는 많은 양의 암모니아 가스가 검출되었고 양돈 슬러리의 pH가 높을수록 발생하는 암모니아 가스가 많이 발생하는 것으로 분석되었다. 본 연구결과 슬러리의 온도를 낮추어 주거나 슬러리의 pH를 낮춤으로써 슬러리로부터 발생하는 악취가스를 크게 줄일 수 있을 것으로 판단되었다.