• 한국생산제조학회지
• /
• 제20권4호
• /
• pp.478-483
• /
• 2011

Cast mold has low wear-resistance comparing with other alloyed molds which result in lower production rate and high cost of products. Recently, various weld methods are being applied to increase the wear-resistance of molds and to extend mold life. Among them, nickel alloy weld process increases the hardness irrelevant to its machinability and creates very uniform structures. In addition, it causes better wear-resistance and reduces shrinkage defects. In this paper, we analyze the mold surface cracks welded by nickel alloy and propose the methods to improve the mold surface and its wear-resistance. It has been found that nickel alloy weld does not affect the inside crack of mold but has an influence on the surface crack seriously. Results show that the start and growth of fatigue cracks have been delayed about 3 times and reduced approximately 75%, respectively, and the mold surface cracks are decreased about 5.7 times.

• 한국정밀공학회지
• /
• 제14권12호
• /
• pp.66-72
• /
• 1997

This paper aims at reviewing the possibility application over normal or abnormal, detection used by AE and the wear characteristics of grinding process. In this study, when diamond bur in dentistry with chosen grinding conditions were tuned at grinding. The variation of grinding resistance and AE signal is detected by the use of AE measuring system. The tests are carried out in accordance with diamond burs and workpiece: arcyl and bovine. According to the experiment results, the following can be expected: AE has the possibility to detect the state normality and abnormality. Hpwever, the grinding resistance measuring can find it difficult to detect it. It can be accurately excepted from AE occurrence pattern in contact start point of diamond bur and bovine, grinding condition and derailment point. It is known that AErms is well compatible with grinding resistance. According to the increase of the material removal rate, the specific energy of the diamond bur is inclined to dectease and the grinding resistance has a tendency to increase.

• 대한통합의학회지
• /
• 제1권1호
• /
• pp.11-22
• /
• 2013

Purpose : The purpose of this study was to investigate the effects of music intervention upon lighting on stress. Method : The participants 60 college students, were divided three groups. Two groups were apply each music and bright lighting(bright lighting groups) and music and dark lighting(dark lighting groups) during 13minutes at Snozelen and the other group was control group. Each groups were assessed stress resistance, activity of parasympathetic nerve, activity of sympathetic nerve, balance of ANS, physical arousal by EKG of CANS 3000, at before and after other each intervention. The analyses were performed using version of SPSS 17. Result : The change rate of bright lighting group was showed statistically significant decrease in stress resistance compared to control group. And the change rate of dark lighting group was showed statistically significant decrease in resistance stress, activity of parasympathetic nerve, and balance of ANS compared to control group and statistically significant increase in stress resistance and activity of parasympathetic nerve compared to bright lighting group. Conclusion : The results of this study indicate that music intervention on dark lighting is more effective on decrease of stress than application of bright lighting and general lighting.

• Journal of Chest Surgery
• /
• 제9권1호
• /
• pp.20-26
• /
• 1976

Author has performed experimental study on hemodynamic changes of lung following radical hilar stripping and contralateral pulmonary artery ligation. In view of hemodynamic changes in group 1 (right pulmonary artery ligation only) and group 2(left hilar stripping+right pulmonary artery ligation). group 2 showed remarkable decrease rate in oxygen uptake (P<0.001) and total pulmonary blood flow(P<0.001), and the more increase rate in mean pulmonary artery pressure(P<0.02) and total pulmonary vascular resistance (P<0.001). Meanwhile, the decrease percent of left lung vascular resistance was lower than group 1(P<0.001). The hemodynamic changes in group 1 returned to control range two weeks later. In the group 2, two dogs were expired as a result of atelectasis and pulmonary hypertension. Among allying 8 dogs, five months after operation, follow up studies performed in two dogs, which showed normal pulmonary hemodynamics similar to preoperative data. The altered blood gas values and decreased oxygen uptake are more remarkable in denervated lung, which may due to pulmonary hypertension and partly retained more secretion in bronchial trees than usual. Important factors of raising pulmonary vascular resistance and pulmonary artery pressure are considered as the increased blood flow to remaining left lung and dysfunction of pulmonary vascular bed to accept the increased blood flow after denervation. Loss of nerve innervation had a influence, to some extent, to the decrease of oxygen uptake and the increase of pulmonary vascular resistance and pulmonary artery pressure. There can be little question that denervation does impair the pulmonary hemodynamics, however, intact pulmonary nerve innervation is not absolutely essential for survival of the animal.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.886-895
• /
• 1993

Experimental were conducted to obtain information on the effect of airflow rates and bed depths on the resistance of coffee cherries and coffee beans available locally (Coffea Liberica). The airflow used were in the range of 0.06 to 0.6 cu. m/s-sq.m. The moisture content of the coffee cherries ranged from 10 % to 50% (wet basis) and that of coffee beans ranged from 12% to 30% )wet basis). Two methods of filling were used i.e. loose fill and packed fill. Pressure drops across the material bed in a vertical column were measured at several depths using inclined manometer. The pressure drop increased directly with air flow rate as well as bed depths. The effects of air flowrates and moisture contents on the resistance in terms of pressure drip per unit bed depth were analysed. The pressure drop per unit depth across the material bed varied slightly due to different depth. The resistance to airflow decreased with the increase in moisture content for loose fill. However, the effect of moisture content is not apparent for packed fill.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권4호
• /
• pp.163-172
• /
• 2022

The purpose of this study is to investigate the changes in the number of repetitions and the repetition rate according to the exercise mode when performing 65%1RM resistance exercise at the 1-minute rest interval and the 3-minute rest interval. Sixteen healthy male subjects were treated with Bench press and Biceps curl of 65%1RM intensity at 1 and 3 minute rest intervals. The number of repetitions for each set of 1 minute rest interval showed a significant decrease from 1set to 5set in bench press. biceps curl showed a significant decrease from 1set to 4set. The repetition rate according to the exercise mode with a 1-minute rest interval showed a significant difference from 2sets to 4sets. In the repetition rate for each set, bench press showed a significant decrease from 1set to 5set. biceps curl showed a significant decrease from set 1 to set 4. The number of repetitions according to the exercise mode with a 3-minute rest interval showed a significant difference from 2sets to 5sets. In the number of repetitions for each set, bench press showed a significant decrease from 1set to 5set. biceps curl showed a significant decrease from 1set to 4set. The repetition rate according to the exercise mode with a 3-minute rest interval showed a significant difference from 2sets to 5sets. In the repetition rate for each set, bench press showed a significant decrease from 1 set to 5 sets. biceps curl showed a significant decrease from 1set to 4set. In summary, the decrease in the number of repetitions according to the set progression in the resistance exercise of the endurance depends on the exercise mode, and the increase of the rest interval or the decrease of the weight-intensity should be considered when aiming for more exercise.

• 한국지반공학회논문집
• /
• 제19권1호
• /
• pp.173-180
• /
• 2003

토목섬유 경계 접촉면들의 동적거동을 이해하는데 매우 중요할 수도 있음에도 불구하고 접촉면들의 동적마찰저항과 변위속도 관계에 관한 연구가 아직까지는 미비한 실정이다. 이에 따라 토목섬유에 대한 실험적 인 연구를 진동대를 이용하여 수행하였다. 반복적, 변위속도 조절장치를 개발하여 사용하였으며 토목섬유 경계 접촉면들의 동적마찰저항과 변위속도사이의 관계를 조사하였다. 실험으로부터 지오텍스타일이 포함된 경계 접촉면에서는 변위속도 증가에 따라 전단강도도 증가한다는 중요한 결과를 얻었다. 이와는 달리 수침상태에서는 접촉면 사이에 갇힌 물에 의한 윤활 효과 등으로 인해 접촉 전단강도가 변위속도에 민감하지 않다는 결과를 얻었다. 본 시험결과는 토목섬유에 비교적 낮은 수직응력이 작용하는 매립장 덮개 및 사면의 동적안정 해석등에 적용할 수 있다.

• 한국식품저장유통학회지
• /
• 제20권3호
• /
• pp.289-295
• /
• 2013

차압예냉시스템을 설계하기 위해서는 송풍저항을 정확하게 예측해야 하며, 송풍저항은 청과물의 적재방법에 따라 크게 달라진다. 본 연구는 차압예냉시스템에서 송풍량에 따른 송풍저항식과 상자의 적재방법별로 송풍저항을 측정할 수 있는 모델을 개발하기 위하여 수행되었다. 공을 퇴적한 모형상자에서의 송풍저항은 빈 상자에서의 송풍저항과 공 퇴적층만의 송풍저항을 합한 값보다 1.5배 정도 높게 나타났다. 또한, 적재상자에서의 송풍저항은 통기폭 방향 적재상자수의 증가에 따라 지수적으로 증가하였으나, 적재길이와 적재높이의 영향은 거의 받지 않았다. 상자를 2열로 적재하는 차압예냉시스템에서 송풍저항은 1개 상자에서의 송풍저항을 기초로 예측이 가능하였으며, 예측모델을 제시하였다.

• 한국표면공학회지
• /
• 제24권4호
• /
• pp.179-186
• /
• 1991

The effects of silicone contents and flow rates(agitation rates) of electrolyte on the formation and mechanical properties of hard anodized film of Al-Si alloy have been studied in 12% H2SO4 + 1% Oxalic acid with varying the silicone contents in the rance of 0 to 11.6% and the flow rates of electrolyte in the range of 0 to 90cm/sec. The film forming voltage required to maintain an equivalent current density significantly increase with the silicone content of Al-Si alloys due to a low conductivity of silicone. Hardness and wear resistance of the anodized film of Al-Si alloys decreases wit increasing the silicone content. The increase in the flow rate of electrolyte has a similar influence on the formation and mechanical properties of anodized film as does the decrease in bath temperature. Hardness of anodized film is rapidly increased with the flow rate being increased from 10cm/sec. It is observed that the increase in the flow rate from 11cm/sec. It is observed that the increase in the flow from 11cm/sec to 48cm/sec is more effective in enhancing the hardness of film than is the decrease in bath temperature from 1$0^{\circ}C$ to $0^{\circ}C$.

• 상하수도학회지
• /
• 제30권6호
• /
• pp.645-652
• /
• 2016

A membrane module including grid was designed and introduced to MBR (membrane bio-reactor) for the purpose of better control of membrane fouling. It could be anticipated that the grid enhances the shear force of fluid-air mixture into the membrane surface by even-distributing the fluid-air to the membrane module. As MLSS concentration, packing density which is expressed in the ratio of the housing and the cross-sectional area of membrane fibers ($A_m/A_t$) and air-flow rate were changed, membrane foulings were checked by monitoring fouling resistances. The total fouling resistance ($R_c+R_f$) without grid installation (i.e., control) was $2.13{\times}10^{12}m^{-1}$, whereas it was reduced to $1.69{\times}10^{12}m^{-1}$ after the grid was installed. Regardless of the grid installation, the $R_c+R_f$ increased as the packing density increased from 0.09 to 0.28, however, the increment of resistance for the grid installation was less than that of the control. Increase in the air flow rate did not always guarantee the reduction of fouling resistance, indicating that the higher air flow rate can partially de-flocculate the activated sludge flocs, which led to severer membrane fouling. Consequently, installation of grids inside the housing have brought a beneficial effect on membrane fouling and optimum air flow rate is important to keep the membrane lowering fouling.