• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.332-337
• /
• 2012

The primary objective of this work is to find the properties of sustained release dissolution pattern depending on solubility of drugs, so venlafaxine HCl and carbamazepine tablets were made by using polymer wich various particle size. Hydroxy propyl methyl cellulose (HPMC) has been utilized in this study as an excipient that is one of the most widely used polymers for an oral sustained release formulation, and drug release pattern was strongly influenced by swelling rate depending on particle size of HPMC. Scanning electron microscope (SEM) was employed to investigate the surface of tablets with various HPMC particle size, and differential scanning calorimeter (DSC) was employed to investigate the crystallization of drugs in tablets. The release model equation was applied to analyze the main mechanism of drug release pattern. The results demonstrate that drug release pattern is controlled by the drug solubility and HPMC particle size.

• Korean Journal of Environment and Ecology
• /
• v.37 no.6
• /
• pp.484-498
• /
• 2023

This study aimed to analyze the appropriateness of the criteria and methods of the feasibility study for national park re-planning. The rate of 'release area' was derived at a lower rate in the absolute evaluation (the second) than the relative evaluation(the third) Seoraksan and Juwangsan National Parks as well as Gayasan National Park. Despite the third evaluation method aiming to maintain park area through retention by setting the areas available for release as 10% rather than applying release, it was found that the absolute evaluation method did not derive more areas available for release. When the second and third ecology-based assessments were applied to study sites, both second and third ecological-based assessments showed that the actual release areas were not reflected in the extraction in 2011. Consequently, it was found that the ecological-based assessment was only a means of assistance instead of a means of critical decision-making for determining the release area. From the district adjustment of the park planning easibility study, it can be determined that interactive exchange and priority application of release criteria as external factors acted more significantly.

• Korean Journal of Weed Science
• /
• v.10 no.2
• /
• pp.122-129
• /
• 1990

The herbicide $^{14}C$-butachlot[N-(butoxymethyl)-2-chloro-2', 6'-diethylacetanilide] labelled uniformly in benzene ring was incorporated in alginate-based granules to get controlled release properties. The influence of kaoline addition on the formulation characteristics and release profiles were evaluated under a closed dark and an opened sunlight condition. Incorporation efficiency of $^{14}C$-butachlor in alginate-kaoline matrices was over 91.8%. Formulation yield was decreased with increase of kaoline concentration. The release rate from all the granules prepared with alginate was slower than that from the commercial granule impregnated in zeolite. The release rate from the granule containing kaoline was decreased as the kaoline content was increased under both conditions. Losses of butachlor from the leacheate solution of the alginate-kaoline matrices under an opened sunlight condition was diminished by increasing the kaoline content.

• Journal of the Korean Society of Combustion
• /
• v.22 no.4
• /
• pp.1-8
• /
• 2017

This study was conducted to evaluate the fire retardant performance of exfoliated graphite nanoplatelets (xGnP) applied for particleboard. This work measured heat release rate(HRR), total heat release(THR) and smoke production rate(SPR) of xGnP added particleboard, using cone calorimeter to assess its fire characteristics according to the KS F ISO 5660-1 standard code. Heat release rates of all specimens treated by xGnP were less than the $200kW/m^2$ for a total experiment period of five minutes. Heat release rates of the specimens coated with xGnP were lower than those of the specimens made by mixing wood particles with xGnP directly. Meanwhile, the total heat release rates of xGnP coated specimen maintained quite lower level than the uncoated so the xGnP coating were effective in improving the fire retardant performance of particleboard. However, the smoke emission peaking problem at the initial combustion period, which was caused by adding base coating materials, should be resolved for further satisfaction as a fire retardant materials.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.4
• /
• pp.273-280
• /
• 1996

Chondroitin sulfate/gelatin microspheres containing dexamethasone 21-acetate were prepared by complex coacervation method and their release patterns were examined in vitro. Microspheres prepared with a small amount of crosslinking agent had smooth surface and few pores, but those with a large amount of crosslinking agent were more porous and less spherical. In vitro release patterns were varied by changing polymer/drug weight ratio and amount of crosslinking agent. The release rate of dexamethasone 21-acetate in the presence of collagenase was faster than that in the absence of collagenase. Anti-inflammatory effect of dexamethasone 21-acetate microspheres was more efficient than that of dexamethasone 21-acetate solution in carrageenan-induced arthritis in the rat. On the basis of the above results, we might expect the degradation and drug release rate of these microspheres to be regulated by the degree of crosslinking and the level of enzymes. In patients with severe rheumatoid arthritis who have high concentration of collagenase, more drug would be released from the microspheres. An intra-articular injection therapy of rheumatoid arthritis with desired release kinetics could be developed to enhance patient compliance and therapeutic index.

• Journal of Pharmaceutical Investigation
• /
• v.30 no.2
• /
• pp.93-98
• /
• 2000

In order to evaluate the effect of fabrication methods on the controlled release of an antibiotic from a polymeric device, two types of polyurethane-cefadroxil matrix were prepared by the solvent casting method or the freeze drying method, using bovine serum albumin as a pore former. The amount of cefadroxil released from various formulations at $37^{\circ}C$ was measured by HPLC. The duration of antimicrobial activity of matrices against S. aureus was evaluated by measuring the diameters of the inhibition zone. The morphology of the matrices was investigated by scanning electron microscopy (SEM). Changing the fabrication method could alter the release rate of cefadroxil from the matrix. The matrix fabricated by the freeze drying method had more porous inner structure and showed higher release rate than that prepared by the solvent casting method. However, the duration of antimicrobial activity was shorter when the matrix was fabricated by the freeze drying method.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.16 no.1
• /
• pp.143-154
• /
• 2014

Settlement of artificially released abalone, Haliotis discus hannai at the marine farming area in Jeollanam-do in 2007 was very efficient by showing the recapture of 2.0-5.2 ind./m² and the survival rate of 60-67%. The growth of shell after 1 year was highest in Hwoenggando by 75.9 mm and the lowest in Hwasan by 64.6 mm. Our result especially showed that the effect of the stock recruitment was the most efficient when abalone was released. The shell growth of the released abalone was better when sea mustard (Undaria sp.) was provided as food (shell length was up to 23.9 mm) or predators were periodically removed (shell length was up to 23.8 mm) in order to enhance the effect of the artificial release than the control group. The recapture rate was also higher than the control. However due to the difficulty of managing the release areas, it will be more efficient to release the recruited stocks after considering various biological and ecological factors such as survey of suitable release areas, stock size, release density, and health of stocks.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.3
• /
• pp.11-17
• /
• 2014

We investigated the applicability of steel slag as a capping material in order to minimize phosphorus(P) release into seawater. Steel slag is a byproduct from the iron and steel industries and the use of steel slag has some advantages in respect of both cost and environmental concern. P removal by steel slag were studied in a batch system with respect to changes in contact time and initial concentration. Kinetic adsorption data were described well by pseudo 2nd order model, indicating rate limiting step for P adsorption to steel slag is chemical sorption. Equilibrium adsorption data fitted well to Langmuir isotherm model which describes for single layer adsorption. The maximum P adsorption capacity of steel slag was 7.134 mg-P/L. Increasing the depth of steel slag produced a positive effect on interruption of P release. More than 3 cm of steel slag was effective for blocking P release and 5 cm of steel slag was recommended as the depth for capping of P contaminated marine sediments. Increasing P concentration and flow rate had a negative effect on P removal ratio. It was concluded that the steel slag has a potential capping material for blocking P release from marine sediments.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.2 no.2
• /
• pp.85-96
• /
• 2015

This study developed biodegradable bi-layered drug-eluting beads and investigated the in-vitro release of fluorouracil and cisplatin from the beads. To manufacture the drug-eluting beads, poly[(d,l)-lactide-co-glycolide] (PLGA) with lactide:glycolide ratios of 50:50 and 75:25 were mixed with fluorouracil or cisplatin. The mixture was compressed and sintered at $55^{\circ}C$ to form bi-layered beads. An elution method was employed to characterize the release characteristic of the pharmaceuticals over a 30-day period at $37^{\circ}C$. The influence of polymer type (i.e., 50:50 or 75:25 PLGA) and layer layout on the release characteristics was investigated. The experiment suggested that biodegradable beads released high concentrations of fluorouracil and cisplatin for more than 30 days. The 75:25 PLGA released the pharmaceuticals at a slower rate than the 50:50 PLGA. In addition, the bi-layered structure reduced the release rate of drugs from the core layer of the beads. By adopting the compression sintering technique, we will be able to manufacture biodegradable beads for long-term drug delivery of various anti-cancer pharmaceuticals.

• Fisheries and Aquatic Sciences
• /
• v.23 no.4
• /
• pp.11.1-11.11
• /
• 2020

We tried to find the optimal growth conditions of sea cucumber and to analyze the economic effectiveness of the sea cucumber seedling release project in Korea. We first examined the optimal growth conditions of sea cucumber in the relating literatures. Then, we analyzed the economic effectiveness of the sea cucumber seedling release project of the Woncheon fishing village union of Gyeongnam Province in 2016-2018 by using the cost benefit analysis method. The net income of the release project of the Woncheon fishing village union was 69,850 Korean won. The benefit to cost ratio of the sea cucumber seedling release project of the Woncheon fishing village union was estimated to be 1.7, indicating that the project was economically feasible. In order to improve the economic feasibility of the sea cucumber release project, as we see in the case of the Woncheon fishing village union, it is necessary to manage the purchase of the sea cucumber seedling, to improve the recapture rate of sea cucumber, and to manage marketing of sea cucumber.