• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.285-291
• /
• 2004

As a part of assessment of the structural material for the molten salt handling system, corrosion behavior of Inconel 718, X-750, Haynes 75 and Haynes 263 alloys in the molten salt of LiCl-Li$_2$O-O$_2$was investigated in the range of temperature; $650^{\circ}C$, time; 24~168h, $Li_2O$; 3wt%, mixed gas; Ar~10%$O_2$. In the molten salt of LiCl-$Li_2O-O_2$, the order corrosion rate was Haynes 263 ＜ Haynes 75 ＜ Inconel X-750 ＜ Inconel 718. Haynes 263 alloy showed the highest corrosion resistance among the examined alloys. Corrosion products of alloys were as fellows: Haynes 75: $Cr_2O_4$, $NiFe_2O_4$, $LiNiO_2$, $Li_2NiFe_2O_4$, Inconel 718; $Cr_2O_4$, $NiFe_2O_4$, Haynes 263; $Li(Ni,Co)O_2$, $NiCr_2O_4$, $LiTiO_2$, Inconel X-750; $Cr_2O_3$, $NiFe_2O_4$,$FeNi_3$, (Al,Nb,Ti)$O_2$. Haynes 263 showed local corrosion behavior and Haynes 75, Inconel 718 and Inconel X-750 showed uniform corrosion behavior.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.8
• /
• pp.1112-1117
• /
• 2012

In this study, the effects of a rice diet and bread diet on plasma triglyceride, insulin and ghrelin levels during low-intensity endurance exercise and recovery were investigated. Ten male students randomly received 2 different treatments: the rice diet and bread diet. On the first day, the participants performed 2 hours of treadmill running with 6% uphill at 50% $VO_{2max}$ after breakfast and then each consumed lunch and dinner. Blood samples were drawn 120 min before exercise and, right before exercise and, 60 min and 120 min after the start of exercise. On the second day, blood samples were drawn prior to breakfast, immediately after breakfast and, 60 min, 120 min, and 180 min after breakfast with no exercise treatment. Plasma triglyceride, ghrelin, glucose, and insulin levels were not significantly different between the two treatment groups on the first day. In addition, there was no difference in the carbohydrate and fat oxidation rate between the two treatments groups. However, plasma triglyceride levels in subjects that received the rice diet were significantly reduced by 14% when compared to subjects that received the bread diet at 180 min after consuming the breakfast diet on the second day. Ghrelin levels were significantly higher for subjects that received the rice diet than subjects that were given the bread diet. However, insulin in participants that consumed the rice diet was significantly lower than those that received the bread diet at 60 min and 120 min after consumption of the breakfast diet on the second day. Glucose levels in the subjects that were given the rice diet were significantly reduced by 10.3% when compared with participants that received the bread diet at 60 min. Therefore, the results of the study showed that a rice diet may be more effective in preventing cardiovascular diseases than a bread diet when combined with exercise.

• Food Science and Preservation
• /
• v.21 no.1
• /
• pp.75-81
• /
• 2014

In this study, the biological activity of water and ethanol extracts from Saururus chinensis by ultra-fine grinding for functional food source are examined. It is more effective to use ethanol than water when extracting phenolic compounds. Approximately 2.5 times higher extraction yield were shown when it was ultra-fine grinded because the particle size decreases, thereby increasing the extraction yield. Normal grinded sample extracts showed 69.8% of DPPH inhibition effect, while fine grinded and ultra-fine grinded sample extracts showed 70.7% and 83.8% each, respectively. Normal extract, as well as fine grinded and ultra-fine grinded extracts, showed over 97% of ABTS inhibition effect, thereby indicating only a slight difference in the anti-oxidative activity with the grinding method. Higher PF was determined with fine grinded and ultra-fine grinded extracts than the normal grinded extract, while ultra-fine grinded 50% ethanol extracts showed the highest anti-oxidative activity value of 1.8 PF. The fine grinded and ultra-fine grinded particle sizes are smaller than the normal grinded particle size, thus increasing the inhibition rate of the TBARS. Furthermore, the ethanol extract was revealed to have a higher effect than the water extracts. The xanthin oxidase inhibition, on the other hand, was identified as ultra-fine grinded that led to the increase in the enzyme inhibition effect. In the angiotensin-converting enzyme, water extracts with normal grinding did not show inhibition activity, while 50% ethanol extracts showed 24% inhibition activity. Moreover, the ethanol extracts showed higher inhibition effect compared to the water extracts. Ultra-fine grinded 50% ethanol extracts showed a slight antibacterial effect on the Staphylococcus aureus and Escherichia coli, while the other extracts showed none. The result suggests that Saururus chinensis extracts by ultra-fine grinding may be more useful than normal grinding as potential sources due to anti-oxidation, angiotensin converting enzyme and xanthine oxidase inhibition.

• Food Science of Animal Resources
• /
• v.24 no.3
• /
• pp.253-259
• /
• 2004

The effect of dietary clay mineral on meat quality in M. longissimus of Hanwoo (Korean cattle) bull beef during refrigerated storage (4$^{\circ}C$) was investigated. Experimental groups were divided into control (basal diet) and CT-1.25% (basal diet + 1.25% clay mineral) groups. There was no significant differences in proximate and fatty acid compositions between control and CT-1.25% groups. The pH of control group was significantly (p<0.05) changed during storage, but CT-1.25% group was little affected by storage time. CIE a＊ (redness), chroma (C＊) values and R630-R580 were significantly (p<0.05) decreased during storage for both groups. In particular, those values decreased more rapidly in the control group. The rate of metmyoglobin accumulation during storage increased more rapidly in the control group. Therefore, discoloration in the control group was more accelerated compared to the CT-1.25% group. TBARS (thiobarbituric acid reactive substances) which represents lipid rancidity were significantly (p<0.05) lower in CT-l.25% group than in the control. Water-holding capacity (WHC) was significantly (p<0.05) increased during storage for both groups, and CT-1.25% group had significantly (p<0.05) higher WHC than control group. Consequently, feeding of clay mineral (1.25%) was effective in increasing meat color stability and WHC, and retarding lipid oxidation than did control group.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.53-64
• /
• 2007

The dynamic release behavior of Cs from high burn-up spent PWR fuel was experimentally performed under the conditions of a thermal treatment process such as voloxidation and sintering conditions. In voloxidation process, influence of the oxidation and reduction atmosphere on the Cs release characteristic using fragment type of spent fuel heated up to $1,500^{\circ}C$ was compared. In sintering process, temperature history effect on Cs release behavior was evaluated using green pellet under 4% $H_2/Ar$ environment. Temperature range for complete Cs release from spent fuel fragment under voloxidation condition was about $800^{\circ}C{\sim}1,200^{\circ}C$, but that of green pellet under the reduction atmosphere was $1,100^{\circ}C{\sim}1,400^{\circ}C$. Key parameters on Cs release behavior from spent fuel was powder formation as well as the diffusion rate of Cs compound to grain boundary and fuel surface.

• Applied Biological Chemistry
• /
• v.26 no.2
• /
• pp.97-103
• /
• 1983

To get further information on the behavior of phorate(0,0-diethyl S-ethylthiomethyl phosphorodithioate) in soil under the subtropical conditions, a field experiment has been conducted. Phorate granule (10%) was applied to silt loam soil at the rate of 40kg a.i./ha and incorporated to 10cm soil depth. Residues of phorate and its metabolites in soil were determined with GLC and confirmed qualitatively with TLC. Phorate was rapidly oxidized to its sulfoxide and sulfone. Therefore, main metabolic pathway of phorate in soil was the oxidation of phorate to phorate sulfoxide and sulfone. Phorate sulfoxide and sulfone were relatively more persistent than phorate itself. Phoratoxon was detected at low level only up to 30 days after treatment and its sulfoxide and sulfone were not detected during the whole experimental period. Toluene-acetonitrile-nitromethane(40 : 30 : 30, v/v/v) solvent system separated satisfactorily phorate and its five metabolites. Most of the residues was found in the initial incorporation depth $(0{\sim}10cm)$. Consequently, insecticides showed a little downward movement.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.101-106
• /
• 2016

In this study, we prepared an ionic liquid composite solid polymer electrolyte (PEO-LiTFSI-$Pyr_{14}TFSI$) with poly(ethylen oxide), lithium bis(trifluoromethanesulfonyl)imide, N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide by blending-cross linking process. Although the PEO-LiTFSI-$Pyr_{14}TFSI$ composite solid polymer electrolyte displayed a small peak at 4.4 V, it had high electrochemical oxidation stability up to 5.7 V. Ionic conductivity of the PEO-LiTFSI-$Pyr_{14}TFSI$ composite solid polymer electrolyte increased with increasing temperature from $10^{-6}S\;cm^{-1}$ at $30^{\circ}C$ to $10^{-4}S\;cm^{-1}$ at $70^{\circ}C$. To investigate the electrochemical properties, the PEO-LiTFSI-$Pyr_{14}TFSI$ composite solid polymer electrolyte assembled with $LiFePO_4$ cathode and Li-metal anode. At 0.1 C-rate, the cell delivered $40mAh\;g^{-1}$ for $30^{\circ}C$, $69.8mAh\;g^{-1}$ for $40^{\circ}C$ and $113mAh\;g^{-1}$ for $50^{\circ}C$, respectively. The PEO-LiTFSI-$Pyr_{14}TFSI$ solid polymer electrolyte exhibited good charge-discharge performance in Li/SPE/$LiFePO_4$ cells at $50^{\circ}C$.

• Journal of Embryo Transfer
• /
• v.22 no.3
• /
• pp.155-160
• /
• 2007

During in vitro culture of mammalian oocytes and embryos, the cells are exposed to the risks that cause cell injury or death. Numerous studies have been reported that the cell injury may be induced by the action of free radicals generated by auto-oxidation. This study was undertaken to investigate the optimal culture condition system for in vitro culture of porcine embryos. We first evaluated the effect of culture media on the porcine embryo development. NCSU-23 and PZM-5, culture medium tested, were failed to produce significant difference on the rate of blastocyst formation. In NCSU-23, the developmental rate was slightly higher than that in PZM-5. During in vitro maturation (IVM), fertilizaton (IVF), and culture (IVC) under 5 or 20% oxygen ($O_2$), the rates of cleavage and development were insignificantly different from each other under our culture condition (20% $O_2$, in NCSU-23), the mean cell number per blastocyst was $40{\pm}10$. These results showed that medium and $O_2$ concentration had no significant effect on the development of porcine embryos.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.167-174
• /
• 2013

Purpose: This study was conducted to evaluate the roughness and surface alternations of three differently blasted titanium discs treated by $Nd:YVO_4$ Laser irradiation in different conditions. Materials and methods: Thirty commercially pure titanium discs were prepared and divided into three groups. Each group was consisted of 10 samples and blasted by $ZrO_2$ (zirconium dioxide), $Al_2O_3$ (aluminum oxide), and RBM (resorbable blasted media). All the samples were degreased by ultrasonic cleaner afterward. Nine different conditions were established by changing scanning speed (100, 300, 500 mm/s) and repetition rate (5, 15, 35 kHz) of $Nd:YVO_4$ Laser (Laser Pro D-20, Laserval $Korea^{(R)}$, Seoul, South Korea). After laser irradiation, a scanning electron microscope, X-ray diffraction analysis, energy dispersive X-ray spectroscopic analysis, and surface roughness analysis were used to assess the roughness and surface alternations of the samples. Results: According to a scanning electron microscope (SEM), titanium discs treated with laser irradiation showed characteristic patterns in contrast to the control which showed irregular patterns. According to the X-ray diffraction analysis, only $Al_2O_3$ group showed its own peak. The oxidation tendency and surface roughness of titanium were similar to the control in the energy dispersive X-ray spectroscopic analysis. The surface roughness was inversely proportional to the scanning speed, whereas proportional to the repetition rate of $Nd:YVO_4$. Conclusion: The surface microstructures and roughness of the test discs were modified by the radiation of $Nd:YVO_4$ laser. Therefore, laser irradiation could be considered one of the methods to modify implant surfaces for the enhancement of osseointegration.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.4
• /
• pp.249-255
• /
• 2009

The performance of microbial fuel cell (MFC) can be affected by many factors including the rate of organic matter oxidation, the electron transfer to electrode by electrochemical bacteria, proton diffusion, the concentration of electron acceptor, the rate of electron acceptor reduction and internal resistance. the performance of MFC using oxygen as electron acceptor can be influenced by oxygen concentration as limit factors in cathode compartment. Many studies have been performed to enhance electricity production from MFC. The series or parallel stacked MFC connected several MFC units can use to increase voltages and currents produced from MFCs. In this study, a single MFC (S-MFC) and a stacked MFC (ST-MFC) using acetate as electron donor and oxygen as electron acceptor were used to investigate the influence of dissolved oxygen (DO) concentrations in cathode compartment on MFC performance. The power density (W/$m^3$) of S-MFC was in order DO 5 > 3 > 7 > 9 mg/L, the maximum power density (W/$m^3$) of S-MFC was 42 W/$m^3$ at DO 5 mg/L. The power density (W/$m^3$) of ST-MFC was in order DO 5 > 7 > 9 > 3 mg/L and the maximum power density (W/$m^3$) of STMFC was 20 W/$m^3$ at DO 5 mg/L. These results suggest that the DO concentration of cathode chamber should be considered as important limit factor of MFC operation and design for stacked MFC as well as single MFC. The results of ST-MFC operation showed the voltage decrease of some MFC units by salt formation on the surface of anode, resulting in decrease total voltage of ST-MFC. Therefore, connecting MFC units in parallel might be more appropriate way than series connections to enhance power production of stacked MFC.