• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.509-513
• /
• 2018

This study uses fly ash for non-shrinkage grout in order to develop strength of grout and improve its durability. We grind fly ash to the extent of $7,000cm^2/g$ and use ground fly ash and raw fly ash respectively at the proportion of 10%, 20%, 30% instead of OPC and compare the results drawn on the condition of each proportion. As a mixed material of grout, EVA and water-reducing agent is added in order to prevent bleeding and improve segregation resistance, CSA is added with a view to preventing drying shrinkage and improving early strength property. In regard to flow and flow time test for analyzing and evaluating workability, it is revealed that grouts of all mix proportions except raw fly ash 30% mix proportion satisfy all performance criteria. With regard to length change rate, grout with no admixture shows the highest shrinkage rate, but the rate is 0.0005%, extremely insignificant rate. As material age increases, compressive strength of two grouts, that is to say ground fly ash 10% and 20%-used grouts, exceed that of grout with no admixture or show high-level compressive strength.

• 건축역사연구
• /
• 제25권3호
• /
• pp.23-35
• /
• 2016

The purpose of this study is to classify types of the eaves structure of buildings with the Jusimpo-type structure and to analyze the characteristics of each eaves structure. For this objective, forty buildings were selected and investigated. The results of analysis are summarized as follows. First, the main members of framework which handle a load burden on the long-rafter(長椽) are classified as the Jusim-dori(柱心道里) and the Oemok-dori(外目道里). Based on the method of handling a load, the eaves structure is classified into three types; the Jusim-processing-type(柱心中心形), the Oemok-processing-type(外目中 心形), and the Oemok-processing-variant-type(外目中心變異形). The Jusim-processing-type is the set where the internal length of a long-rafter is longer than the length of the eaves on the basis of the center of a column. The Oemok-processing-type is the set where the external length of a long-rafter is longer than the internal length of it. And the Oemok-processing-variant-type is the set where the internal length of a long-rafter is longer than the external length of it, but it is shorter than the length of the eaves which includes the extruded length of a Buyeon(浮椽). Second, the Jusim-processing-type had been generally adopted in the Jusimpo-type structure of the Goryeo Dynasty. But since the 17th century, the Oemok-processing-type had the highest application rate. Third, the change from the Jusimdori-processing-structure to the Oemokdori-processing-structure means that the long-rafter is moved to the direction of outside of the building, and thus the Jung-dori(中道里) is gradually moved to the column center. And, the change of the eaves with the Jusimpo-type structure was not a process for increasing the length of the eaves but a process for adopting the advantages of the Dapo-type structure by changing the arrangement of purlin. Fourth, the change from the Jusimpo-type structure to the Dapo-type structure could be understood as a process for moving the main point for handling a load from the Jusim-dori to the Oemok-dori.

• Journal of Communications and Networks
• /
• 제7권4호
• /
• pp.462-470
• /
• 2005

We propose a multi-rate and multi-BEP transmission scheme using adaptive overlapping pulse-position modulator (OPPM) and optical power controller in optical code division multiple access (CDMA) networks. The proposed system achieves the multi-rate and multi-BEP transmission by accommodating users with different values of OPPM parameter and transmitted power in the same network. The proposed scheme has advantages that the system is not required to change the code length and number of weight depending on the required bit rate of a user and the difference of bit rates does not have so much effect on the bit error probabilities (BEPs). Moreover, the difference of transmitted powers does not cause the change of bit rate. We analyze the BEPs of the four multimedia service classes corresponding to the com­binations of high/low-rates and low/high-BEPs and show that the proposed scheme can easily achieve distinct differentiation of the service classes with the simple system configuration.

• 한국지반신소재학회논문집
• /
• 제17권1호
• /
• pp.111-118
• /
• 2018

단층 등 취약지반 조건에서의 터널굴착 시 터널천단 및 측벽변위의 억제를 목적으로 하는 각부보강공이 일반적으로 적용되고 있으며, 터널 단면증가 변화율에 따른 각부보강공 설치각도 및 길이를 고려한 지보안전성 확인을 위한 주요 인자로서 내공변위 천단침하 각부침하 각부축력 등의 여러 응력변위 특성 변수들이 있다. 이러한 굴착중 안전성확인을 위한 변수들에 대한 검토 결과, 우각부 침하영향성이 단면증가율 보다 더 큰 변위경향을 보이는 가장 중요한 중점관리 지배요소로 분석되었으며, 터널단면 증가 변화율에 대한 각 보강공 길이별 축력의 변화관점에서는 큰 연관성을 보여주지 못하는 터널단면 증가율 대비 작은 증가율을 나타냈다. 또한, 각부 보강공 축력의 발생경향은 터널 단면증가율보다 보강공 마찰지지 개념 메커니즘에 따른 거동 영향성을 보여주는 것으로 분석되었다. 본 연구결과, 일정한 길이의 각부 보강공이 선정될 경우 지반불량 구간에서의 터널 단면이 다소 대단면화하여도 무리하게 각부보강공의 길이를 연장시키지 않는 것이 시공성 및 경제성을 고려한 보다 더 합리적인 방법으로 판단된다.

• 핵의학기술
• /
• 제21권1호
• /
• pp.70-75
• /
• 2017

방사성 요오드 갑상선 섭취율 검사는 방사성 요오드를 투여하고 일정 시간 후 갑상선의 요오드 방사능치를 측정하여 전반적인 기능 상태를 알아보는 검사법이다. 검사에 영향을 미치는 인자는 매우 다양하다. 본 연구에서는 갑상선의 길이나 두께, 부피에 따른 기하학적 요인이 계수율에 주는 영향을 관찰하고자 한다. 액체상태의 $^{131}I\;185kBq$ ($5{\mu}Ci$)을 지름이 0.5, 1, 1.5, 3 cm 인 주사기에 넣고 길이를 1 cm 간격으로 생리식염수를 추가하여 증가시켰다. 선원을 장비로부터 25 cm 거리에서 횡축방향과 종축방향으로 위치하였을 때 각각의 계수율을 측정하였다. 횡축 방향으로 위치하였을 때, 선원의 길이가 변화하여도 대부분 유의한 차이를 보이지 않았다. 종축 방향으로 위치하였을 때, 곡선추정 회귀분석 결과 복합모형곡선과 높은 상관관계를 보였고($$R^2{\geq_-}0.941$$), 선원의 길이가 증가할수록 계수율은 감소하였다. 따라서 갑상선 섭취율 검사 시, 갑상선의 가로나 세로 방향의 차이에 따른 섭취율의 오차는 적을 것으로 예상되어 지며, 단순한 부피의 차이보다 갑상선의 두께 및 투여 전 선량측정 시의 비커에 따라서 오차가 생길 수 있다고 예상된다. 따라서 오차를 줄이기 위해서는 초음파 등의 영상을 참고하여 두께를 구해 섭취율 수치에 적용하거나, 결과에서 구한 복합방정식을 통해 오차를 예측, 갑상선과 섭취율 장비의 거리를 변화시킨다면 비교적 정확한 계수율을 구할 수 있을 거라 사료 된다.

• 한국주조공학회지
• /
• 제20권3호
• /
• pp.181-187
• /
• 2000

There are two types of vacuum die casting, one is known as the chill block method, and the other is the valve block method. Efficiency of the valve block method is better than the chill block method. However purchasing and maintaining cost of the former one is very high, the latter method is popular in many small and medium die casting shops. Simple evacuation system using chill vent was prepared to investigate the effect of the air pressure, hose length and chill vent type on the pressure change in die cavity in this study. The rate of evacuation was influenced by the evacuation method, chill vent condition and hose length. Evacuation time became longer and vacuum level lower when evacuating cavity via chill vent. It took a longer time to evacuate the cavity when a longer hose was used. Vacuum level in the cavity also decreased with increase in hose length.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 가을학술발표대회논문집
• /
• pp.211-212
• /
• 2023

Polishing tiles among porcelain tiles are more durable and aesthetic than ceramic tiles, so their demand has recently increased. In particular, since polishing tiles have a very low absorption rate, organic adhesives with chemical bonds are mainly used. However, organic adhesives have low economic efficiency and some volatile organic compounds (TVOCs). Therefore purpose of this study was to evaluate the performance of polishing tile adhesion by developing organic-inorganic adhesives, which have chemical bonds and mechanical bonds. As a result, since the amorphous chain and chemical bonds of the polymer in the tile adhesives, both tensile and shear adhesion strength were satisfied with the KS L 1592, KS L 1593, and the rate of length change itself in the thermal cycling was lower than organic adhesives. So it is thought that it is possible to replace some organic adhesives.

• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.760-768
• /
• 2007

Statement of problem. Conventional denture treatment for totally edentulous patients is associated with a variety of functional and psychosocial problems. The placement of implants in the anterior region of the maxilla and mandible and the fabrication of an implant-retained overdenture might solve these problems. Purpose. This study compared the marginal bone loss around the implant and evaluated the implant survival rate and complications in patients treated with overdentures retained by implants for 2 years. Material and methods. Patients who had received implant-retained overdentures using a Dolder bar at Samsung Medical Center from January 1999 to June 2005 and had participated in the annual recall programs for two years were selected for this study. A total of 18 patients and 56 $Br{\aa}ne-mark\;system^{(R)}$ implants were used, and their data were reviewed. Evaluations of the survival rate, bone quality, marginal bone loss, and complications were performed. The data on the Dolder bar length and clip length were measured. The change in marginal bone loss and the correlation between the marginal bone loss and bar length, clip length, or bone quality were investigated. Results. Implants placed in this study showed a 100% survival rate. The average annual bone loss was 1.12mm in the first year and 0.27mm in the second year in the maxilla, and 0.58mm in the first year and 0.22mm in the second year in the mandible. The marginal bone loss in the maxilla showed no significant association with those in the mandible. (P>.05). There was no significant difference in marginal bone loss around implants between the first and second year. (P>.05) There was no statistically significant relationship (P>.05) between the marginal bone loss and bone quality, clip length, or Dolder bar length. The Dolder bar length showed a high correlation with the clip length. (P<.05) Various complications were noted. Conclusion. These results confirmed the favorable outcome for patients treated with implant-retained overdentures.

• Advances in materials Research
• /
• 제11권1호
• /
• pp.41-57
• /
• 2022

This paper is focused on delamination analysis of a multilayered inhomogeneous viscoelastic beam subjected to linear creep under constant applied stress. The viscoelastic model that is used to treat the creep consists of consecutively connected units. Each unit consists of one spring and two dashpots. The number of units in the model is arbitrary. The modulus of elasticity of the spring in each unit changes with time. Besides, the modulii of elasticity and the coefficients of viscosity change continuously along the thickness, width and length in each layer since the material is continuously inhomogeneous in each layer of the beam. A time-dependent solution to the strain energy release rate for the delamination is derived. A time-dependent solution to the J-integral is derived too. A parametric analysis of the strain energy release rate is carried-out by applying the solution derived. The influence of various factors such as creep, material inhomogeneity, the change of the modulii of elasticity with time and the number of units in the viscoelastic model on the strain energy release rate are clarified.

• 한국의류산업학회지
• /
• 제22권2호
• /
• pp.222-232
• /
• 2020

This study analyzes changes in the knees, hips, and hip joint length according to the different angles of bending knees by 45°, 90°, and 135° respectively for knees, hips, and the hip joint that have high fracture rates when falling down. The research subjects were 10 elderly women in their 60s (or older) that obtain data collected through direct measurement. For analysis, the study drew a diagram of elongation and shrinkage based on changes and change rate from a straight posture (0°) and conducted a statistical analysis on differences of body surface length by zone according to movements. The more the knees were bent, the vertical surface length in front of the knees, the horizontal surface length above the knee line, the horizontal body surface length below the knee lines on the back, and the vertical surface lengths between front side lines and the side lines increased; however, the vertical surface length on the back decreased. For the hip joint, the difference in the vertical surface length was more distinctive when compared to the horizontal. Finally, the horizontal surface length increased below the hips and the vertical surface length increased in most areas except the sidelines and the front. The result of the change in body surface length according to the movements of this study can be utilized in the development of the motion-variable protector.