carried out to present a rheology model which is able to treat time-dependent properties of clay. The results were summarized as follow ; 1. The slope (a(e1)) of deviator stress in strain rate test was independent on axial strain, and pore water pressure was decreased with increment of strain rate. 2. The pore water pressure in a stress relaxation condition was not changed when the strain rate before stress relaxation was 0.05%/min., but it was increased with increment of time when the strain rate before stress relaxation was 0.2%/min 3. The greater the stress condition (q/qmax) and the strain rate before creep test became, the greater the increment rate of axial strain in creep test became. 4. SEKIGUCHI's constitutive equation was slightly overpredicted while empirical equation proposed in the study was well coincided with measured values. 5. The constitutive equation induced by a strain function could be dealed with a behavior of the pore water pressure increased with increment of elapsed time after primary consolidation.
Residential building owners are turning toward renovating their existing buildings to improve old and inefficient HVAC systems. Due to the renovation, much of the added costs will inevitably be passed on to tenants by increasing rent rates. This increment often increases the vacancy rate in the buildings. To balance the interests of both owners and tenants, this paper suggested a method to determine an appropriate rental rate increment for the HVAC system renovation. A case study on residential buildings was conducted to determine a balanced point where the rental rate increment that offsets the amount tenants are willing to pay for the renovation. To calculate all costs incurred by the renovation, life-cycle cost analysis was carried out. Therefore, this paper ultimately provides a threshold value of rental rate increment such that building owners can make a reasonable decision on the HVAC system renovation.
The plastic deformation of polycrystalline materials is induced by changes of the microstructure when the loading is beyond the critical state of stress. Constitutive models for the crystal plasticity have the common objective which relates microscopic single crystals in the crystallographic texture to the macroscopic continuum point. In this paper, a new consistent tangent stiffness for the anisotropic elasto-viscoplastic analysis of polycrystalline deformation is developed, which can be used in the finite element analysis for the slip-dominated large deformation of polycrystalline materials. In order to calculate the consistent tangent stiffness, the state function is defined based on the consistency condition between the elastic and plastic stress. The rate of shearing increment($\Delta{\gamma}^{\alpha}$) is calculated with satisfying the consistency condition. The consistency condition becomes zero when the trial resolved shear stress($\tau^{{\alpha}^*}$) becomes resolved shear stress($\tau^{\alpha}$) at every step. Iterative method is utilized to calculate the rate of shearing increment based on the implicit backward Euler method. The consistent tangent stiffness can be formulated by differentiating the rate of shearing increment with total strain increment after the instant rate of shearing increment converges. The proposed tangent stiffness is applied to the ABAQUS/Standard by implementing in the ABAQUS/UMAT.
Objectives: This study measured the impact of shifts in maternal age and parity on the increase in the low birth weight (LBW) rate in Korea. Methods: We obtained raw data for all 6 397 945 live births registered at the Korea National Statistical Office between 1995 and 2005. We calculated the proportion of increment in the LBW rate due to changes in the distribution of maternal age and parity (AP-dis) and the proportion due to changes in the age- and parity-specific LBW rate (AP-spe). Results: The LBW rate increased from 3.02% in 1995 to 4.28% in 2005. The multiple birth rate increased from 1.32% to 2.19% during the same period. Of the 1.26% points increment in the LBW rate, 0.64% points occurred among singleton births and 0.62% points occurred among multiple births. Changes in the AP-dis accounted for 50% of the increase in the LBW rate among singleton births, but did not contribute to the increase in the LBW rate among multiple births. The remainder of the total increment in the LBW rate was explained by the increase in the AP-spe. Conclusions: This study demonstrated that shifts in maternal age and parity among singleton births and increased multiple births were important contributors to the increment in the LBW rate. This study also revealed that the increase in the AP-spe was an equally important contributor as the shifts in maternal age and parity to the increment in the LBW rate among singleton births and was a major contributor among multiple births.
The purpose of this study was to provide basic data of the growth characteristics of the landscape trees for better landscape planting design, construction and maintenance through the prediction of landscape change as time passes fly the analysis of survival rate, distribution patterns & increment percent of tree height, width, stem diameter (breast or surface) of widely used six tree species in Seongnam-si Eunhang-jugong apartment housing areas (8 years have passed after landsape alanting work). The main results can be summarized as followed. The tree survival rate of Pinus parviflora was the highest rate 89.2% than any other species, but Acer buergerianum showed the lowest survival rate at that of it 35.0%, & that of Picea abies 70.5 %, Metasequoia glyptostroboides 71.6%, Maknolia denudata 38.9%, Acer paimatum was 71.7%, As a whole, the tree survival rate of coniferous trees were relatively high. The tree height increment percent of the deciduous species wert relatively high. And that of Metasequoia glyptostroboides was the highest rate 11.61% than any other species, but that of Magnolia denudata was the lowest rate 5.59% than any other species. According to this results, the increment percent of trees in this apartment areas were comparatively lower than that of each related species planted in nursery area. And this results would be considered when landscape experts do landscape planting design, construction & maintenance. The distribution patterns of present tree size showed a Normal Distribution like any other biological features.
The AlSi etching process using the MERIE type reactor carried out with different process parameters such as C1$_{2}$ and N$_{2}$ gas flow rate, RF power and chamber pressure. The etching characteristics were evaluated in terms of etch rate, selectivity, uniformity and etched profile. As the N2 gas flow rate is increased, the AlSi etch rate is decreased and uniformity has remained constant within .+-.5%. The etch rate is increased and uniformity is decreased, according to increment of the C1$_{2}$ gas flow rate, RF power and chamber pressure. Selective etching of TEOS with respect to AlSi is decreased as the RF power is increased while it is increased by increment of the C1$_{2}$ gas flow rate and chamber pressure, on the other hand, selective etching of photoresist with respect to AlSi is increased by increment of the C1$_{2}$ gas flow rate and chamber pressure, it is decreased as the N$_{2}$ gas flow rate is increased.
본 연구는 국내 문헌연구와 외식업 성공사례들을 통해 외식업 창업성공요인들을 도출하고, 이 요인들이 경영성과에 미치는 영향을 창업외식업체에 대한 설문조사를 통하여 실증적 연구를 수행하였다. 첫째, 창업자 특성 요인이 경영 성과에 미치는 영향을 분석한 결과, 사회적 기술은 순이익 증가율과 고객 증가율에 유의한 영향을 주는 것으로 나타났으며 창업 준비성은 순이익 증가율, 고객 증가율 및 좌석 회전율에 유의한 결과가 확인되었다. 둘째, 운영 관리 요인에서는 접근성이 고객 증가율과 좌석 회전율에, 시설은 좌석 회전율에, 서비스 역량은 순이익 증가율과 고객 증가율 및 좌석 회전율에, 촉진 활동은 고객 증가율에 각각 유의한 것으로 확인되었다. 셋째, 상품 요인에서는 창업외식업의 경우에 품질지향성이 경영성과에 미치는 영향은 통계적으로 유의하지 않은 것으로 확인되었다. 따라서 본 연구는 외식업의 창업을 위한 요인을 제시함으로써 외식업을 창업하려는 외식창업 준비자 및 기존 외식업 사업자들의 성공전략수립에 기여할 것이다.
과압밀비(過壓密比)와 전단속도(剪斷速度) 및 다짐율(率)이 점성토(粘性土)의 응력변형특성(應力變形特性)에 미치는 영향(影響)을 검토(檢討)하기 위해서 반부극하(反復戟荷)에 의(依)한 삼축압축시험(三軸壓縮試驗)을 한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 반부재하(反復載荷)를 했을 때 같은 변형(變形)에서 축차응력의 차(差)는 큰 변형(變形)에서 반부재하(反復載荷)했을 때 더욱 크게 나타났고 공극수압(空隙水壓)은 제하시(除荷時)에는 감소(減少)하다가 다시 증가(增加)하며 재재하(再載荷)되면서 급격히 증가하는 현상(現象)을 나타냈다. 2. 과압밀비(過壓密比)가 클수록 변형(變形)의 증가(增加)에 따라 회복되는 탄성변형률은 감소(減少)하였으며 제일재하계수(除一載荷係數)는 과압밀비가 증가(增加)할수록 감소(減少)하였다. 3. 전단속도(剪斷速度)가 증가(增加)함에 따라 탄성변형율(彈性變形率)은 증가(增加)하였고 변형(變形)의 증가(增加)에 따라 탄성변형율(彈性變形率)은 감소(減少)하였다. 제일재하계수(除一載荷係數)는 변형(變形)이 증가(增加)함에 따라 감소(減少)하였고 전단속도(剪斷速度)가 빠른 경우에 큰 값을 나타냈다. 4. 회복되는 탄성변형율(彈性變形率)은 다짐율이 증가(增加)함에 따라 크게 나타났고 또 변형(變形)이 증가(增加)함에 따라 탄성변형율(彈性變形率)은 약간 감소(減少)하는 경향(傾向)을 나타냈다. 제일재하계수(除一載荷係數)는 다짐율(率)의 증가(增加)에 따라 뚜렷한 경향(傾向)은 보이지 않았으나 일반적(一般的)으로 변형(變形)이 증가(增加)함에 따라 감소(減少)하는 경향(傾向)을 나타냈다.
Journal of the Korean Data and Information Science Society
/
제16권2호
/
pp.237-253
/
2005
In Korea, the volume of insurance industry has been increased rapidly with helping the economic growth, the increment of GNP and derive of public welfare policy. But the other side of the volume increment, the life insurers have some problems, such as the high rate of turnover, lapses and surrenders, in processing of acquiring more insurance contracts. The object of this paper is the analysis of the causes and properties of the high rate of turnover, lapses and surrenders using statistical survival model. Also we hope that the insurers will use the results of analysis to reduce the rates.
The objective of this study is to understand the effect of measurement-related investment. That is, this study aims at verifying the correlation between the measurement-related investment and inferiority rate of products by statistical analysis. The samples of this study are 376 industrial companies in Korea, and the research data was analysed on inferiority state of industrial companies with a measurement standard laboratory. The analysis was made by the elementary statistics, the correlation analysis and the regression analysis. The results are summarized as follows : First, the inferioriy rate of the industrial companies with a measurement standard laboratory was relatively lower than that of the other companies without the laboratory by statistical significance. Second, the increment on measurement-related investment had a negative correlation with the increment of inferiority rate, and the increase of measurement-related investment showed decrease of the inferiority rate by regression analysis.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.