• 제목/요약/키워드: rate of convergence-$O(h^2)$

검색결과 37건 처리시간 0.026초

합성 Calcium Alumino Ferrite(CAF) 치환량에 따른 시멘트 수화 특성 (Hydration properties of OPC with Synthesized Calcium Alumino Ferrite(CAF))

  • 이웅걸;송명신
    • 한국건설순환자원학회논문집
    • /
    • 제11권1호
    • /
    • pp.9-15
    • /
    • 2023
  • 시멘트는 대표적인 이산화 탄소 배출 산업이다. 에너지 소비와 CO2 배출 저감을 위해 제조 공정 개선 및 대체 재료의 사용확대가 필요하다. 따라서 본 연구는 CO2 흡착형 재료인 CAF을 저온 소성하여 시멘트에 적용하여 시멘트 수화의 기본 특성을 확인하였다. 합성 CAF의 수화 생성물에 대한 결정상 분석과 공극 분포, 그리고 구조 이미지를 확인하고, 압축강도를 측정하였다. SCAF는 치환율은 10, 20, 100 %으로 하였으며, 치환율의 증가에 따라 압축강도는 저하되는 경향을 보인다. 또한, SCAF 치환율 100%인 경우, 초기 재령의 수화 생성물은 calcium aluminum oxide hydrate (Ca3Al2O6·xH2O)와 calcium iron hydroxide (Ca3Fe(OH)12)이며, 치환율 10, 20 %에서는 일반적인 시멘트 수화물 외에 CAF 화합물인 Brownmillerite가 관찰되었다. 또한, 공극율은 치환율의 증가에 따라 공극 크기가 크고 공극율이 높았다. 본 연구 결과 저온 소성으로 제조된 CAF는 CO2 흡착형 재료로 활용을 위해 단독 사용 및 일반 양생은 어려울 것으로 보인다.

광민감 광섬유로 제작한 광섬유 브래그 격자 센서의 방사선 민감도에 대한 연구 (The Study of Radiation Sensitivity on Fiber Bragg Grating Written in Photo-sensitive Optical Fibers)

  • 김종열;이남호;정현규
    • 한국정보통신학회논문지
    • /
    • 제18권8호
    • /
    • pp.2023-2028
    • /
    • 2014
  • 본 논문에서는 광민감 광섬유와 일반 단일모드 광섬유로 제작된 광섬유 브래그 격자 센서의 감마방사선 영향을 분석하였다. 제작된 광섬유 브래그 격자는 $Co^{60}$ 감마선원을 이용하여 300 Gy/min의 선량률로 총선량 17.8 kGy 감마선을 조사하였다. 실험결과를 통하여 수소로딩을 하지 않은 광민감 광섬유로 제작된 브래그 격자가 가장 낮은 약 18 pm의 브래그 파장 이동을 보였다. 또한 방사선 조사에 의한 브래그 파장변화는 광섬유 코어의 $GeO_2$ 함량보다는 수소로딩 공정에 훨씬 큰 영향을 받는다는 것을 확인하였다.

Quantitative Comparison of the Photocatalytic Efficiency of TiO2 Nanotube Film and TiO2 Powder

  • Jang, Jun-Won;Park, Sung Jik;Park, Jae-Woo
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제21권2호
    • /
    • pp.8-14
    • /
    • 2016
  • We compared the plausible reaction mechanism and quantitative efficiency of highly self-organized TiO2 nanotube (ntTiO2) film with TiO2 powder. Film was fabricated by electrochemical potentiostatic anodization of titanium thin film in an ethylene-glycol electrolyte solution containing 0.3 wt% NH4F and 2 vol% deionized water. Nanotubes with a pore size of 80-100 nm were formed by anodization at 60 V for 3 h. Humic acid (HA) was degraded through photocatalytic degradation using the ntTiO2 film. Pseudo first-order rate constants for 0.3 g of ntTiO2, 0.3 g TiO2 powder, and 1 g TiO2 powder were 0.081 min−1, 0.003 min−1, and 0.044 min−1, respectively. HA adsorption on the ntTiO2 film was minimal while adsorption on the TiO2 powder was about 20% based on thermogravimetric analysis. Approximately five-fold more normalized OH radicals were generated by the ntTiO2 film than the TiO2 powder. These quantitative findings explain why ntTiO2 film showed superior photocatalytic performance to TiO2 powder.

Non-thermal Plasma Process for simultaneous removal of SO2/NOx from a Sintering Plant of Steel Works

  • 남창모;목영선;권기홍;서유덕;조병락
    • 한국산업융합학회 논문집
    • /
    • 제6권1호
    • /
    • pp.81-86
    • /
    • 2003
  • For the simultaneous removal of $SO_2$/NOx from an iron-ore sintering plant, industrial plasma experiments have been conducted with a flue gas flow rate of $5,000Nm^3/hr$. The maximum 40kW power using the magnetic pulse compression (MPC) system generates a peak value of 100-150kV pulse voltage with its risetime of 200nsec and full width at half maximum (FWHM) of 500nsec, and with a frequency <300Hz. The plasma reactor module adopts a wire-plate structure with a gap of 200-400mm ID between plates. Initial concentrations of $SO_2$ and NOx were around 100-150ppm, respectively in the presence of 15% $O_2$ and <10% $H_2O$. Various reaction parameters such as specific energy ($Whr/Nm^3$), $NH_3$ injection with corona discharge, flow rate and injection of hydrocarbons were investigated for $SO_2$/NOx removal characteristics. About 90/65% of $SO_2$/NOx were simultaneously removed with a specific energy of $3.0Whr/Nm^3$ when both $NH_3$ and hydrocarbons were injected. Practical implications that the pilot-scale plasma results provide are further discussed.

  • PDF

화학적 기계적 연마 공정을 통한 bulk AlN 단결정의 표면 가공 (Optimization of chemical mechanical polishing for bulk AlN single crystal surface)

  • 이정훈;박철우;박재화;강효상;강석현;이희애;이주형;인준형;강승민;심광보
    • 한국결정성장학회지
    • /
    • 제28권1호
    • /
    • pp.51-56
    • /
    • 2018
  • PVT법으로 성장된 AlN 단결정의 표면 평탄화 최적화 하기 위하여 기계적 연마 후 $SiO_2$ slurry를 이용한 CMP 공정을 진행하였고 이에 따른 표면 형상, slurry 변화에 따른 가공 특성을 분석하였다. Slurry의 pH가 표면 연마 과정에 미치는 영향을 알아보기 위해 $SiO_2$ slurry의 pH를 조절하였으며, 제타전위측정기를 통해 각각의 pH에 따른 zeta potential의 영향과 MRR(material removal rate) 결과를 비교하였으며, 최종적으로 원자간력 현미경(atomic force microscope)을 이용한 표면 거칠기 RMS(0.2 nm)를 얻을 수 있었다.

나노 실리카와 카본블랙이용 탄화열 반응으로 나노 SiC 합성 및 특성 (Synthesis of SiC Nanoparticles by a Sol-Gel Process)

  • 정광진;배동식
    • 한국재료학회지
    • /
    • 제23권4호
    • /
    • pp.246-249
    • /
    • 2013
  • Nano-sized ${\beta}$-SiC nanoparticles were synthesized combined with a sol-gel process and a carbothermal process. TEOS and carbon black were used as starting materials for the silicon source and carbon source, respectively. $SiO_2$ nanoparticles were synthesized using a sol-gel technique (Stober process) combined with hydrolysis and condensation. The size of the particles could be controlled by manipulating the relative rates of the hydrolysis and condensation reactions of tetraethyl orthosilicate (TEOS) within the micro-emulsion. The average particle size and morphology of synthesized silicon dioxide was about 100nm and spherical, respectively. The average particles size and morphology of the used carbon black powders was about 20nm and spherical, respectively. The molar ratio of silicon dioxide and carbon black was fixed to 1:3 in the preparation of each combination. $SiO_2$ and carbon black powders were mixed in ethanol and ball-milled for 12 h. After mixing, the slurries were dried at $80^{\circ}C$ in an oven. The dried powder mixtures were placed in alumina crucibles and synthesized in a tube furnace at $1400{\sim}1500^{\circ}C$ for 4 h with a heating rate of $10^{\circ}C$/min under flowing Ar gas (160 cc/min) and furnace cooling down to room temperature. SiC nanoparticles were characterized by XRD, TEM, and SAED. The XRD results showed that high purity beta silicon carbide with excellent crystallinity was synthesized. TEM revealed that the powders are spherical shape nanoparticles with diameters ranging from 15 to 30 nm with a narrow distribution.

아리큐민의 In-vitro 신경보호 효과 (In-vitro Neuroprotective Effect of Aricumin(Turmeric extract))

  • 윤남규;김병권;유현열;서보승;신창호;김관규;이한주
    • 문화기술의 융합
    • /
    • 제8권3호
    • /
    • pp.291-296
    • /
    • 2022
  • 퇴행성 신경질환 치료를 위한 AChE inhibitor 관련 연구로써 생물학적 유용성을 높인 커큐민에 대한 연구를 수행하게 되었다. 본 연구의 목적은 아리큐민(강황추출물)에 대한 in vitro 신경보호 효과를 확인하는데 있다. 신경보호효과를 확인하기 위해 아리큐민(강황추출물)에 대한 AChE inhibition을 평가하였고, HT-22 세포에 대한 세포생존율을 분석하였으며, 산화스트레스(glutamate, H2O2) 유발에 따른 HT-22 세포생존을 확인하였다. 아리큐민(강황추출물)의 AChE 저해율 변화결과 아리큐민 39.06㎍/㎖ 이상의 농도에서 약 20% 이상의 AChE 활성을 저해하는 것으로 확인하였다. 그리고 산화스트레스(glutamate 5 mM 및 H2O2 500 µM) 유발 HT-22 cell의 세포 독성을 0.01~0.1 mg/ml 농도에서부터 유의하게 억제하는 것을 확인하였다(p<0.05). 이와 같은 결과로 볼 때 아리큐민(강황추출물)은 신경보호 효과 효능이 우수한 것으로 확인되었다.

식각공정용 가스방전에서 이온 및 활성종 밀도의 전자밀도 및 온도 의존성에 대한 수치해석적 분석 (Numerical Investigation of Ion and Radical Density Dependence on Electron Density and Temperature in Etching Gas Discharges)

  • 안충기;박민혜;손형민;신우형;권득철;유신재;김정형;윤남식
    • 한국진공학회지
    • /
    • 제20권6호
    • /
    • pp.422-429
    • /
    • 2011
  • 식각공정에 주로 사용되는 $Cl_2$/Ar, $CF_4$, $CF_4/O_2$, $CF_4/H_2$, $C_2F_6$, $C_4F_8$, 그리고 $SF_6$ 가스 방전에서 이온, 중성종 및 활성종 밀도의 전자밀도와 온도에 대한 의존성을 수치해석적으로 분석하였다. 이온, 중성종 및 활성종 밀도에 대한 공간평균 유체방정식을 정상상태로 가정하여 상대적으로 측정이 용이한 전자밀도와 온도에 대한 식으로 표현하였고, 이 식을 수치해석적인 방법으로 풀었다. 계산에 사용된 반응계수들은 여러 문헌에서 수집되거나 산란단면적으로부터 계산되었고, 같은 반응에 대해 다른 값을 보일 경우, 계산 결과를 실험 결과와 비교하여 높은 일치도를 보이는 값이 선택되었다.

Study on Chemical Removal of Nitric Oxide (NO) as a Main Cause of Fine Dust (Air Pollution) and Acid Rain

  • Seo, Hyeon Jin;Jeong, Rak Hyun;Boo, Jang-Heon;Song, Jimin;Boo, Jin-Hyo
    • Applied Science and Convergence Technology
    • /
    • 제26권6호
    • /
    • pp.218-222
    • /
    • 2017
  • This study was conducted to remove $NO_x$, which is the main cause of fine dust and air pollution as well as acid rain. $NO_x$ was tested using 3% NO (diluted in He) as a simulated gas. Experiments were sequentially carried out by oxidizing NO to $NO_2$ and absorbing $NO_2$. Especially, we focused on the changes of NO oxidation according to both oxidant ($NaClO_2$) concentration change (1~10 M) and oxidant pH change (pH = 1~5) by adding HCl. In addition, we tried to suggest a method to improve $NO_2$ absorption by conducting $NO_2$ reduction reaction with reducing agent (NaOH) concentration (40~60%). It was found that NO removal efficiency increased as both concentration of oxidant and flow rate of NO gas increased, and NO decreased more effectively as the pH of hydrochloric acid added to the oxidant was lower. The $NO_2$ adsorption was also better with increasing NaOH concentration, but the NO removal efficiency was ~20% lower than that of the selective NO reduction. Indeed, this experimental method is expected to be a new method that can be applied to the capture and removal of fine dust caused by air pollution because it is a method that can easily remove NO gas by a simple device without expensive giant equipment.

Comparison of the anesthetic effects of 2,2,2-tribromoethanol on ICR mice derived from three different sources

  • Lee, Mi Ree;Suh, Hye Rin;Kim, Myeong Whan;Cho, Joon Young;Song, Hyun Keun;Jung, Young Suk;Hwang, Dae Youn;Kim, Kil Soo
    • Laboraroty Animal Research
    • /
    • 제34권4호
    • /
    • pp.270-278
    • /
    • 2018
  • This study was conducted to compare the anesthetic effects of 2,2,2-tribromoethanol (TBE, $Avertin^{(R)}$) in ICR mice obtained from three different sources. TBE (2.5%) was intraperitoneally injected at three doses: high-dose group (500 mg/kg), intermediate-dose group (250 mg/kg), and low-dose group (125 mg/kg). Anesthesia time, recovery time, end-tidal peak $CO_2$ ($ETCO_2$), mean arterial blood pressure, heart rate, oxygen saturation ($SpO_2$), body temperature, pH, $PCO_2$, and $PO_2$ of the arterial blood were measured. Stable anesthesia was induced by all doses of TBE and the anesthesia time was maintained exhibited dose dependency. No significant differences in anesthetic duration were found among the three different strains. However, the anesthesia time was longer in female than in male mice, and the duration of anesthesia was significantly longer in female than in male mice in the high-dose group. The recovery time was significantly longer for female than male mice in the intermediate- and high-dose groups. In the ICR strains tested, there were no significant differences in the mean arterial blood pressure, $SPO_2$, arterial blood $PCO_2$, and $PO_2$, which decreased after TBE anesthesia, or in heart rate and $ETCO_2$, which increased after TBE anesthesia. In addition, body temperature, blood biochemical markers, and histopathological changes of the liver, kidney, and lung were not significantly changed by TBE anesthesia. These results suggested that ICR mice from different sources exhibited similar overall responses to a single exposure to TBE anesthesia. In conclusion, TBE is a useful drug that can induce similar anesthetic effects in three different strains of ICR mice.