• 상하수도학회지
• /
• 제26권6호
• /
• pp.841-849
• /
• 2012

The effluent quality of phosphorus is strengthened by the national standard to conserve water resources to lessen the eutrophication threat. The soluble phosphate in the wastewater effluent can be removed using the converter slag as solid waste produced through the steel making process. The experiments for removal efficiencies and removal constants were performed for this research with the artificial wastewater following several different conditions, particle size, phosphate concentration and initial pH. The correlation coefficients of Freundlich adsorption isothem were 0.9505 for $PS_A$, 0.9183 for $PS_B$, respectively. The removal efficiency was 87-94 % for $PS_A$ and 90-96 % for $PS_B$ respectively. The pH of the wastewater was elevated to pH 11.8 for the initial pH 8.5, phosphate removal efficiency was the highest as 84 % ~ 98 %. In case of 10 mg/L of the intial phosphate, the removal efficiency was 96 ~ 98 %. The more initial pH increases, the higher the reaction rate constant is.

• BMB Reports
• /
• 제28권1호
• /
• pp.40-45
• /
• 1995

Acetolactate synthase purified from Serratia marcescens ATCC 25419 was rapidly inactivated by the thiol specific reagent p-chloromercuribenzoate (PCMB), the tryptophan specific reagent N-bromosuccinimide (NBS), and the arginine modifying reagent phenylglyoxal (PGO). Inactivation by PCMB was prevented by both ${\alpha}$-ketobutyrate and pyruvate, and the second order rate constant for the inactivation was $2480\;M^{-1}{\cdot}min^{-1}$. The reaction order with respect to PCMB was 0.94. The inactivation of the enzyme by NBS was also substantially reduced by both ${\alpha}$-ketobutyrate and pyruvate. The second order rate constant for inactivation by NBS was $15,000\;M^{-1}{\cdot}min^{-1}$, and the reaction order was 2.0. On the other hand, inactivation by PGO was partially prevented by ${\alpha}$-ketobutyrate, but not by pyruvate. The second order rate constant for the inactivation was $1480\;M^{-1}{\cdot}min^{-1}$ and the order of reaction with respect to PGO was 0.75. These results suggest that essential cysteine, tryptophan and arginine are located at or near the substrate binding site.

• 한국동물위생학회지
• /
• 제39권2호
• /
• pp.93-99
• /
• 2016

The anesthetic depth and cardiovascular effect of alfaxalone constant rate infusion in dogs premedicated with xylazine or acepromazine were evaluated. Ten dogs were randomly allocated into 2 groups. In group AA, dogs were premedicated with 0.02 mg/kg of intravenous acepromazine at 15 min before induction. In group XA 1.1 mg/kg of intravenous xylazine was premedicated at 5 min before induction. The anesthesia was maintained with 6 mg/kg/hr of alfaxalone after induction with 2 mg/kg alfaxalone in both groups. In both of groups, the qualities of induction were satisfactory without any adverse event, but adequate analgesia could not be provided, according to the withdrawal test. $PaO_2$ and $SaO_2$ implied a slight hypoxemia state in XA group, while those values of group AA were not significantly changed. The acepromazine and alfaxalone combination induce mild tachycardia. The bispectral index score were significantly decreased in group XA, compared with that in group AA. The premedication of xylazine before alfaxalone constant rate infusion in this study could provide adequate analgesia during 30 min, while the premedication with acepromazine could not.

• Bulletin of the Korean Chemical Society
• /
• 제26권1호
• /
• pp.139-145
• /
• 2005

Artificial neural networks (ANNs), for a first time, were successfully developed for the modeling and prediction of solvent effects on rate constant of [2+2] cycloaddition reaction of diethyl azodicarboxylate with ethyl vinyl ether in various solvents with diverse chemical structures using quantitative structure-activity relationship. The most positive charge of hydrogen atom (q$^+$), dipole moment ($\mu$), the Hildebrand solubility parameter (${\delta}_H^2$) and total charges in molecule (q$_t$) are inputs and output of ANN is log k$_2$ . For evaluation of the predictive power of the generated ANN, the optimized network with 68 various solvents as training set was used to predict log k$_2$ of the reaction in 16 solvents in the prediction set. The results obtained using ANN was compared with the experimental values as well as with those obtained using multi-parameter linear regression (MLR) model and showed superiority of the ANN model over the regression model. Mean square error (MSE) of 0.0806 for the prediction set by MLR model should be compared with the value of 0.0275 for ANN model. These improvements are due to the fact that the reaction rate constant shows non-linear correlations with the descriptors.

• 대한환경공학회지
• /
• 제22권2호
• /
• pp.217-229
• /
• 2000

입상 및 분말 활성탄에 대한 페놀의 흡착평형실험을 $25{\pm}1^{\circ}C$에서 행하였으며 그 결과를 Freundlich isotherm으로 나타내었다. 흡착속도 실험은 회분식 흡착법으로 입자외부 물질이동저항이 무시되는 조건하에서 행하였으며, 실험결과는 LDF 흡착속도상수를 구하기 위하여 Miller의 방법으로 해석하였다. 고정층 흡착칼럼에서 페놀-활성탄계의 흡착실험을 행하였다. 흡착칼럼실험은 온도를 $25{\pm}1^{\circ}C$로 일정하게 유지하면서, 흡착대의 길이는 추산한 흡착대 길이보다 크게 하여 정형농도분포가 이루어지도록 하였다. 그리고 각기 다른 두 가지 공탑유속의 경우에 대해 실험하였다. LDF 모델식의 흡착속도계수는 흡착율에 따라 변화되며, 이 가변성 흡착속도계수를 사용하여 정형 농도변화곡선을 추정한 결과 일정 평균치를 사용한 경우보다 실험결과와 더 일치하였다.

• Journal of Electrical Engineering and Technology
• /
• 제1권1호
• /
• pp.110-113
• /
• 2006

A high rate deposition sputtering process of magnesium oxide thin film in oxide mode has been developed using a 20 kW unipolar pulsed power supply. The power supply was operated at a maximum constant voltage of 500 V and a constant current of 40 A. The pulse repetition rate and the duty were changed in the ranges of $10\sim50$ kHz and $10\sim60%$, respectively. The deposition rate increased with rising incident power to the target. Maximum incident power to the magnesium target was obtained by the control of frequency, duty and current. The deposition rate of a moving state was 9 nm m/min at the average power of 1.5 kW. This result shows higher deposition rate than any other previous work involving reactive sputtering in oxide mode. The thickness uniformities over the entire substrate area of $982mm{\times}563mm$ were observed at the processing pressure of $2.8\sim9.5$ mTorr. The thickness distribution was improved at lower pressure. This technique is proposed for application to a high through-put sputtering system for plasma display panels.

• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.380-385
• /
• 2009

평판형 교반기를 사용하여 2-amino-2-methyl-1-propanol(AMP)가 용해된 methanol, ethanol, n-propanol, n-butanol, ethylene glycol, propylene glycol, 및 propylene carbonate와 같은 극성 용매에서 이산화탄소($CO_2$)의 흡수속도를 측정하였다. $CO_2$의 흡수속도와 carbamate 생성 반응 메커니즘을 사용하여 기-액 불균일반응계의 빠른 반응영역에서 $CO_2$-AMP의 반응속도론을 해석하였으며 용매의 용해도 매개변수와 반응속도상수와의 상관관계를 제시하였다.

• Journal of Pharmaceutical Investigation
• /
• 제5권2호
• /
• pp.51-56
• /
• 1975

In the course of the investigations on drug metabolism and drug disposition in man, it has been noted that there are often rather striking individual differences in the response to drugs and in the ability to metabolize and dispose of drugs. Some of the person-to-person differences are due to environmental factors, but some have clearly demonstrated to be genetically determined. This report determined the rate of acetylation and some constants of sulfa-methizole to korean. The results are as follows: The overall removal rate of drug from the body is 0.572(k, $hr^{-1}$) the rate constant for acetylation, 0.222($k_2$, $hr^{-1}$) the rate constant for excretion of unchanged drug, 0.350($k_3$, $hr^{-1}$) and the faction of a dose ultimately excreted in the urine as unchanged drug is 0.677. And this report determined the optimal time to make a single blood level determination after an oral dose of the drug and obtain a reasonable index of the rate of sulfamethizole metabolism. The resulting data(sulfamethizole levels at 5 hours after drug administration) clearly established bimodality even though only about 106 subjects were tested.

• Journal of Biosystems Engineering
• /
• 제11권1호
• /
• pp.52-63
• /
• 1986

This study was performed to find out drying characteristics and develop drying model for the design of an efficient dryer or drying system of red peper. The basic model which describes drying phenomenon of red pepper was firstly established, and drying tests were conducted at 14-different drying conditions. In this test, the effects of drying air temperature and relative humidity on the rate of drying were undertaken. Finally, a new drying model based on these experimental results was developed to describe the drying characteristics of red pepper. The results from this study may be summarized as follows. 1. Drying constant of the basic model established from Lewis' experimental model and diffusion equation was theoretically deduced as a function of moisture content and inner-temperature of red pepper. 2. From the results of drying tests, drying air temperature was found to have the greatest effect on the rate of drying. However, the effect of temperature was small for the condition of high relative humidity, and for low temperature, the effect of relative humidity was found to be large even though the range of relative humidity was low. 3. Modified Henderson equation was found to be better than Chung equation as the EMC model for the estimation of the equilibrium moisture content of red Pepper. 4. Constant-rate drying period did not exist in the red pepper drying test. And falling-rate drying period was divided into three distinct phases. Drying rate was dependent on the moisture content, the inner-temperature of red pepper and the change of physical property due to drying. 5. Drying constant increased with decrease of free moisture content, but it decreased at the end of the drying period. Also, drying constant was dependent on the drying air temperature and relative humidity. 6. The new drying model developed in this study was found to be most suitable in describing the drying characteristics of red pepper. Therefore, it may be concluded that drying time could be accurately estimated by the new drying model.

• Membrane and Water Treatment
• /
• 제5권4호
• /
• pp.281-293
• /
• 2014

The present work aimed to study the decolorization kinetics and characteristics of a selected azo dye under the influence of two key operational parameters including hydraulic retention time (HRT) and solid retention time (SRT). The decolorization efficiency and the two important criteria of k and normalized k (k/MLSS) were evaluated in lab-scale membrane sequencing batch reactors (MSBRs) at various HRTs of 48, 24 and 16 h (with constant SRT) and in addition, at various SRTs of infinity, 40 and 10 d (with constant HRT). According to the obtained results, both zero and first-order kinetics were properly fitted the decolorization profiles of the selected azo dye in all of the applied HRTs and SRTs. Increase of both HRT and SRT positively affected the decolorization efficiency. More MLSS concentrations corresponded to the lower HRTs and the higher SRTs resulted in higher decolorization rate constants (k). However, the effect of reducing the HRT was not compensated by increase of the MLSS concentration in order to reach higher decolorization efficiency. In addition, increase of the decolorization efficiency, as a consequence of the higher MLSS concentrations at longer SRTs, was restrained by decrease of the time-limited decolorization capability of biomass (represented by normalized k). Evaluation of both k and normalized k is suggested in order to have a more precise study on the decolorization kinetics and characteristics.