• 한국응용과학기술학회지
• /
• 제4권1호
• /
• pp.67-71
• /
• 1987

The transesterification reaction between diethanolamine and methyl methacrylate was kinetically investigated in the presence of various metal acetate catalysts at $120^{\circ}C$. The amount of reacted methyl methacrylate was measured by gas chromatography and liquid chromatography, and the reaction rate also measured from the amount of reaction products and reactants under each catalyst. The transesterification reaction was carried out in the first order with respect to the concentration of diethanolamine and methyl methacrylate, respectively. The over-all order is 2nd. The apparent rate constant was found to obey first-order kinetics with respect to the concentration of catalyst. The maximum reaction rate was appeared at the range of 1.4 to 1.6 of electronegativity of metal ions and instability constant of metal acetates.

• 방송공학회논문지
• /
• 제8권2호
• /
• pp.163-171
• /
• 2003

고정 및 이동수신환경에서 결합 소스/채널 부호화 기법을 MPEG-4(Moving picture Experts Group) 비디오 전송에 적용하여 대역폭 사용 효율을 높이는 방안에 대하여 논하였다. 채널환경은 랜덤잡음환경과 이동수신환경을 고려하였다. 소스부호화기는 MPEG-4 비디오, 채널부호화기는 RCPC(Rate Compatible Punctured Convolution) 그리고 변조방식은 QPSK(Quadrature Phase Shift Keying)를 적용하였다. 이 논문에서는 여러가지 채널상태(Es/No)에 따른 율-왜곡특성에 대해 분석하여 소스비트율과 채널부호율 간에 최적의 상충점(Trade-off point)을 결정하였고, 결합 소스/채널 부호화 기법과 일반적인 고정부호율 전송기법을 비교하여 결합 소스/채널부호화의 효율성을 보였다.

• 수산해양기술연구
• /
• 제28권1호
• /
• pp.71-78
• /
• 1992

Zr-4 used for a cladding and an end plug of reactor component has creep deformation under operation at high temperature. Creep is regarded as the time dependent deformation of a material under constant applied stress. Although the major source of the deformation of zirconium component in water-cooled reactors is irradiation creep, the thermal creep may give a rise to significant deformation in reactor component especially at relatively high temperatures and at various constant stresses, and therefore it must be predicted accurately. Stress relaxation is the time dependent change of stress at constant strain and it is a process related intimately to creep. In this paper, the creep behavior and stress relaxation of Zr-4 is examined at the temperature of 50$0^{\circ}C$ that is 40% of the absolute melting temperature of Zr-4 under the stress below yield stress and under the various constant strains. The results obtained are summarized as follows: 1) With an increase of stress, the steady state creep rate increases and the creep rupture time decreases. 2) The steady state creep rate $\varepsilon$(%/s) for the stress $\sigma$sub(c) (kgf/mm super(2)) of Zr-4 increases outstandingly. All the empirical equations computed for Zr-4 increases outstandingly. All the empirical equations computed for Zr-4 are in accord with Norton's model equation($\varepsilon$=K$\sigma$ sub(c) super (n)). The constants of materials computed are as follows: K=3.9881$\times$10 super(-5), n=1.9608 3) The rupture time T sub(r) (hr) decreases linearly with the increase of stress on the log-log scaled graph. The empirical equations computed for Zr-4 are in accord with Bailey's model equation (T sub(r)=K sub(1)$\sigma$sub(c) super(m)). The constants of materials computed are as follows: K sub(1)=1.2875$\times$10 super(16), m=-3.467 4) It seems clear that the strain could be quantitatively dependent on the high temperature creep properties such as creep stress, rupture time, steady state creep rate and total creep rate. It is found that these relationships are linear on the log-log graph. 5) In stress relaxation test, as the critical constant strain that can be allowed to the specimen is larger, stress relaxation becomes more rapid, and as the constant strain is smaller, the stress relaxation becomes slower.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.106-111
• /
• 1994

We proposed a new variable sampling rate model which expresses the phenomena with both rapid and slow components. A method for determining the variable sampling rate and the older of the time series model was explained. The proposed variable sampling rate model was evaluated based oil an information criterion(AIC). Tile variable sampling rate model brought smaller an information criterion than one of a constant sampling rate model of conventional type, and was proved to be effective as a prediction model of the system with both rapid and slow components.

• KSBB Journal
• /
• 제13권6호
• /
• pp.730-734
• /
• 1998

An이ew식과 Aiba삭을 조합하여 에탄올 생산단주인 Saccharomyces cerevisiae ATCC 24858의 비성장속도를 당농도와 에탄올 농도의 함수로 표현하였다. 기침의 저해영향을 받지 않는 최대 당농도 $S_m$은 150 g/L이며 기질의 저해영향은 기질농도 S와 $S-S_{max}$항의 함수로 표현되었다. 최대 비성장 속도 ${\mu}max 는 0.49 hr^{-1}, Monod상수 K_s$는 19 g/L, Andrew식의 기질저해상수 $K_1$는 139 g/L이였다. 또한 비성장속도에 영향을 마치지 앓는 최대알콜농도 Pm이 존재하였으며 그 값은 2 g/L 이였다. 따라서 Aiba식에서 비성장속도에 영향을 미치는 에탄올 농도항은 P-Pm으보 표현되었다. 본 연구의 알코올생산균주에 대한 비성장속도의 완성된 수식은 디음과 같으며 이 수식에 위한 계산값은 평균오차 6% 내외의 범위에서 실험값과 일치하였다.

• 설비공학논문집
• /
• 제29권12호
• /
• pp.628-637
• /
• 2017

This study was conducted to present an effective control method for the common duct system to uniformly discharge volume flow rate exhausted from the kitchen and bathroom of each household in an apartment regardless of the position of household. Since the common duct system is installed vertically and the ventilator is installed in the terminal, the static pressure of each household decreases when vertical height increases. Therefore, the volume flow rate exhausted from each household is different. In order to improve such a phenomenon, a constant air volume damper shall be installed in a branch duct coupled with a common vertical duct system. The selected ventilator should also be able to handle the maximum volume flow rate considering diversity factor. Therefore, a uniform volume flow rate must be exhausted from all households where the hood is operated. This paper mainly focuses on suggestion of an optimum exhaust control method by comparing exhaust performance of each household according to the presence or absence of a constant air volume damper.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
• /
• pp.53-56
• /
• 2005

A Laboratory study was conducted to evaluate the kinetics of oxidation of trichloroethylene (TCE) in groundwater by potassium permanganate $(KMnO_4)$, Consumption of permanganate by TCE and aquifer materials was also evaluated to obtain an appropriate injection rate of $KMnO_4$. TCE degradation by $KMnO_4$ in the absence of aquifer material showed effective with pseudo-first order rate constant, $k_{obs}=1.8110^{-3}\;s^{-1}\;at\;KMnO_4=500mg/L$. TCE oxidation by $KMnO_4$ was found to be second order reaction and the rate constant, $k=0.65{\pm}0.08\;M^{-1}s^{-1}$, was independent of pH changes. $KMnO_4$ consumption rate by groundwater sampled from field site was not significant, indicating that groundwater containing negligible amount of dissolved organic matter does not have any influence on the $KMnO_4$ degradation. Meanwhile, aquifer materials from field site were actively reacted with permanganate, resulting in the significant consumption of $KMnO_4$. It might be attributed to the existence of metal oxides in aquifer materials, Based on the rate constants obtained from this study, appropriate injection rate of permanganate and TCE removal rate in groundwater could be estimated.

• 공업화학
• /
• 제25권2호
• /
• pp.167-173
• /
• 2014

정수 슬러지를 재활용하여 제조한 펠렛형 흡착제의 트리메틸아민과 암모니아의 흡착 특성을 연구하였다. 펠렛형 흡착제를 $110^{\circ}C$에서 건조 처리 했을 때보다 $500^{\circ}C$에서 소성했을 때 BET 표면적과 기공 부피가 증가하는 것을 알 수 있었다. 정수 슬러지를 재활용하여 제조한 펠렛형 흡착제는 브뢴스테드 산점과 루이스 산점을 보유하는 것을 확인하였다. 흡착질 가스인 트리메틸아민과 암모니아가 일정한 농도로 흡착제 층으로 유입되고, 흡착제의 중량과 흡착질의 선속도를 변화시키면서 흡착질 가스의 파과시간을 측정하였다. Wheeler의 흡착속도식을 사용하여 트리메틸아민과 암모니아의 동적흡착용량과 흡착속도상수를 결정하였다. 동적흡착용량과 흡착속도상수가 흡착질 가스의 선속도에 따라 변화함을 알 수 있었다. 정수 슬러지를 재활용하여 제조한 펠렛형 흡착제 상에서, 다양한 흡착조건에서 트리메틸아민과 암모니아의 파과시간을 예측하기 위한 실험식을 도출하였다.

• 한국전산유체공학회지
• /
• 제19권4호
• /
• pp.1-7
• /
• 2014

A numerical study of transient conjugate heat transfer on micro heater in a micro-channel substrate under a sinusoidal heat load was conducted. It was found that the time constant is not affected by the maximum heating magnitude of the sinusoidal heat load. However, the time constant increases with low duration of the sinusoidal heating period and low Reynolds number. Moreover, there is a threshold where a heater temperature do not reach to time constant at low thermal diffusivity, low flow rate, and low pulse duration of the sinusoidal heating. The time constant should be considered for transient convective heat transfer under transient sinusoidal heat load in a micro heat sink.

• 한국자동차공학회논문집
• /
• 제1권1호
• /
• pp.50-58
• /
• 1993

The ignition delay of diesel oil and fish oil blended with diesel oils was investigated at various pressure and temperature conditions in a constant volume combustion bomb. The evaporation and combustion duration of diesel oil and fish oil blended with diesel oils were respectively different in high and low temperature. The dependence of ignition delay on the temperature was different in high and low temperature ranges which were divided at the 773K. The dependence of ignition delay on the pressure was almost linear, regardless of the test fuels at the constant temperature(863K). The ignition delay became longer as the blending rate of fish oil increased at the constant temperature and pressure, but it was especially short with 20% fish oil blended with diesel oils.