• Journal of Sericultural and Entomological Science
• /
• v.7
• /
• pp.1-26
• /
• 1967

In order to develop the standards for the measurement of drought resistance in mulberry trees (Morus genus) the varietal differences of drought resistance were measured for 30 mulberry varieties, and the relationships between the drought resistance and the histological and physiological characteristics of mulberry leaves were investigated. The results were summarized as follows; 1. It is reasonable to use the drought resistance ratio, expressed by D/D'＊100, for the standard of drought resistance measurement for mulberry tree as a perennial tree crop. Where: D stands for growth amount(shoot length) in the plot of dry treatment, at the end of treatment. D' stands for an expected value of D which is expressed by B＊C/A. Here, A is the growth amount of wet treatment plot at the beginning of treatment, B is the growth amount of dry treatment plot at the beginning of treatment, and C is the growth amount of wet treatment plot at the end of treatment. 2. The results obtained from the application of above formula showed that the varieties Cadaneo, Tahozosaeng, Yongchunchuwu, Kaeryang suban. and Kabsun were highly resistant to drought and the varieties Jukmok, Shipyung, Sobun, Kaeryangzosaeng shipmoonza and Chungagokyo were highly susceptible. 3. Among leaf tissues. the rate of inter-cellular space showed the highest relationship with drought resistance. The correlation coefficient calculated (r=0.4153) was highly significant. Other leaf tissues such as epidermis and palisade showed no significant correlations with drought resistance. 4. The size and density of stomata were correlated to drought resistance. That is: Correlation between drought resistance and size of stomata(length ${\times}$ width)......r= -0. 3253(signif. at 5%) density(No. of stomata/l$\textrm{mm}^2$......r= +0.5047(signif. at 1%)

• The Korean Journal of Mycology
• /
• v.10 no.3
• /
• pp.119-124
• /
• 1982

The characteristics of the six different agricultural soil from Michigan were as follows. Colwood and Capac soil were loam, Gilford and Ceresco were sandy clay loam, Sission was clay loam, and Spinks was sandy loam. pH of Gilford sandy clay loam was 6.6 whereas that of the soil ranged $5.4{\sim}5.9$. Gilford sandy loam found to contain a relatively higher amount of organic matters as compared to other soils. Furthermore, the numbers of bacteria in Gilford sandy clay loam were significantly higher than those in other soils. The populations of fungi in Gilford sandy clay loam and Colwood loam soils were significantly greater than those in other soils. On the other hand, the densities of actinomycetes in Gilford sandy clay loam and Ceresco sandy clay loam soils were significantly different from those in other soils. The population of anaerobic bacteria varied depending on the soils; Ceresco sandy clay loam, Capac loam, Colwood loam soils have higher numbers of bacteria, whereas Gilford sandy clay loam was very lesser than the other soils. In the $^{14}C-glucose$ respiration by soil microorganisms after 10 hrs, the respiration rate was decreasing in the order of Ceresco sandy clay loam, Spinks sandy loam, Colwood loam, Sission clay loam, Capac loam and Gilford sandy clay loam. Germination of test propagules on natural soil soil was $0{\sim}5%$, and it was germinated $90{\sim}98%$ on autoclaved soil and PDA. The propagules differed in thier germination response to nutrients added to the soils. In general, more nutrients were required to promote germination on Capac loam and Gilford sandy loam soil than Spinks sandy loam soil. Especially Mortierella n. sp. required more nutrients for germination to obtain the same ratio as Helminthosporium victoriae.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.739-752
• /
• 2006

Deep-sea surface sediments acquired by multiple corer from 69 stations in the Clarion-Clipperton fracture zone of the northeast equatorial Pacific, were examined to understand the correlation of mass physical properties and sedimen-tological processes. The seabed of the middle part ($8-12^{\circ}N$) of the study area is mainly covered by biogenic siliceous sediment compared with pelagic red clays in the northern part ($16-17^{\circ}N$). In the southern part ($5-6^{\circ}N$), water depth is shallower than carbonate compensation depth (CCD). The mass physical properties such as grain size distribution, mean grain size, water content, specific grain density, wet bulk density, void ratio, and porosity of sediments are distinctly different among the three parts of the study area. Surface sediments in northern part are characterized by fine grain size and low water contents possibly due to low primary productivity and high detrital input. Conversely, sediments in the middle part are characterized by coarse grain size and high water contents, which might be caused by high surface productivity and deeper depth than CCD. The sediments show low water contents and high density in the southern part, which can be explained by shallower depth than CCD. Our results suggest that the variations in mass physical properties of sediments are influenced by combined effects including biogenic primary productivity of surface water, water depth, especially with respect to CCD, sedimentation rate, detrital input, and the geochemistry of the bottom water (for example, formation of authigenic clay minerals and dissolution of biogenic grains).

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.33-40
• /
• 2006

The characteristics of the aluminum waste melting and the distribution of the radioactive nuclides have been investigated for the estimation on the volume reduction and the decontamination of the aluminum wastes from the decommissioning of the TRIGA MARK it and III research reactors at the Korea Atomic Energy Research Institute(KAERI). The aluminum wastes were melted with the use of the fluxes such as flux $A:NaCl-KCl-Na_3AlF_6$, flux B:NaCl-NaF-KF, flux $C:CaF_2$, and flux $D:LiF-KCl-BaCl_2$ in the DC graphite arc furnace. For the assessment of the distribution of the radioactive nuclides during the melting of the aluminum, the aluminum materials were contaminated by the surrogate nuclides such as cobalt(Co), cesium(Cs) and strontium(Sr). The fluidity of aluminum melt was increased with the addition of the fluxes, which has slight difference according to the type of fluxes. The formation of the slag during the aluminum melting added the flux type C and D was larger than that with the flux A and B. The rate of the slag formation linearly increased with increasing the flux concentration. The results of the XRD analysis showed that the surrogate nuclide was transferred to the slag, which can be easily separated from the melt and then they combined with aluminum oxide to form a more stable compound. The distribution ratio of cobalt in ingot to that in slag was more than 40% at all types of fluxes. Since vapor pressures of cesium and strontium were higher than those that of the host metals at the melting temperature, their removal efficiency from the ingot phase to the slag and the dust phase was by up to 98%.

• Journal of the Korea Concrete Institute
• /
• v.26 no.5
• /
• pp.651-660
• /
• 2014

Structural members using ultra high strength concrete which usually used with steel fiber is designed with guidelines based on several investigation of SF-RPC(steel fiber reinforced reactive powder concrete). However, there are not clear design method yet. Especially, SF-RPC member should be casted with steam(90 degree delicious) and members with SF-RPC usually used with precast members. Although the most important design parameter is development method between SF-RPC and steel reinforcement(rebar), there are no clear design method in the SF-RPC member design guidelines. There are many controversial problems on safety and economy. Therefore, in order to make design more optimum safe design, in this study, we investigated bond stress between steel rebar and SF-RPC according to test. Test results were compared with previously suggested analysis method. Test was carried out with direct pull out test using variables of compressive strength of concrete, concrete cover and inclusion ratio of steel fiber. According to test results, bond stress between steel rebar and SF-RPC increased with increase of compressive strength of concrete and concrete cover. Increasing rate of bond stress were decrease with increase of compressive strength of SF-RPC and concrete cover significantly. 1% volume fraction inclusion of steel fiber increase the bond stress between steel rebar and SF-RPC with two times but 2% volume fraction cannot affect the bond stress significantly. There are no exact or empirical equations for evaluation of SF-RPC bond stress. In order to make safe bond design of SF-RPC precast members, previously suggested analysis method for bond stress by Tepfers were evaluated. This method have shown good agreement with test results, especially for steel fiber reinforced RPC.

• Clinical and Experimental Pediatrics
• /
• v.45 no.9
• /
• pp.1134-1140
• /
• 2002

Purpose : Childhood accidents have been increasing recently. Accidents rank as the leading cause of childhood mortality and morbidity. We performed this study to evaluate the causes of childhood accidents. Methods : The authors analysed retrospectively the medical records of 6,410 cases of childhood accidental injuries who visited the emergency room of Asan Medical Center from January 1990 to December 1999. Results : The most common type of accidents was trauma which accounted for 5,038 cases of the total accidents, followed by falls, burns, foreign body aspiration, and poisoning. The most common age of foreign body aspiration was under two years old and the male to female ratio was 2 to 1. The most common site of foreign body aspiration was the esophagus and the stomach, followed by the respiratory tract. In airways, the right and left main bronchus were the most common site for foreign body aspiration and were accompanied by the highest mortality. The most common foreign body in the gastrointestinal tract and respiratory tract were coins and peanuts, respectively. Conclusion : The most common cause of accidents was trauma, followed by falls, burns, foreign body aspiration, and poisoning. The incidence of foreign body aspiration and poisoning is increasing in infants. In cases of foreign bodies in airways, proper management is needed because of the high mortality rate.

• Pediatric Infection and Vaccine
• /
• v.17 no.1
• /
• pp.30-35
• /
• 2010

Purpose : We investigated the causative organism and its antibiotic susceptibility of community acquired urinary tract infection (UTI) in children at a secondary hospital to test the adequacy of the current guidelines. Methods : Children diagnosed with UTI at the Department of Pediatrics, Kwandong University MyMyongji Hospital by pyuria and bacterial growth of greater than $1.0{\times}10^5CFU/mL$ on clean catch midstream urine from January 2005 to December 2008 were studied retrospectively. The epidemiologic data, causative organism, and the antibiotic susceptibility were analyzed. Results : Sixty two children were diagnosed with sixty four cases of UTI's. Two bacteria were isolated in one case and thus data on 65 urine cultures were analyzed. The male:female ratio was 1.6:1 and 78.1% were less than 12 months of age. Escherichia coli was the predominant cause consisting of 53 cases (82.8%) of the cases. K. pneumoniae (5), Enterobacter (4), Enterococcus (1), $\beta$-streptococcus (1), Diphtheroides (1) were isolated. The antibiotic resistance of E. coli were as follows; ampicillin 69.8%, cefotaxime 1.9%, gentamicin 15.1%, amikacin 0.0%, levofloxacin 1.9%, and trimethoprim/sulfamethoxazole 26.4 %. Only one case of the E. coli was extended spectrum $\beta$-lactamase (ESBL) positive. Conclusion : Compared to prior reports from other tertiary hospitals in Korea, E. coli was the predominant cause in childhood UTI and the rate of ESBL positivity was low. The antibiotic resistance was also different compared to prior reports. We conclude that a difference in the cause and antibiotic resistance of childhood UTI exists between centers and this should be taken into consideration when prescribing antibiotics for childhood UTIs.

• Journal of Chest Surgery
• /
• v.35 no.11
• /
• pp.792-798
• /
• 2002

Although there is a controversy on the optimal timing for active infective endocarditis(IE), recently good results of early surgical intervention have been published. Herein, we analyzed the results of surgery for active IE according to the duration of preoperative antibiotic treatment. Material and Method : Retrospectively, we analyzed 51 patients who underwent operation for active IE at the department of thoracic and cardiovascular surgery of Samsung medical center from Mar. 1995 to Oct. 2001. Male to female ratio was 39:12, mean age of the patients was 44.5$\pm$17.8 years(range : 13~74). Infected valves were mitral valve in 17(33.3%), aortic valve in 15(29.4%), mitral and aortic valve in 12(23.5), and tricuspid valve in 5(9.8%) cases. Among them, prosthetic valve endocarditis was present in 10(19.6%) cases. Infecting organism was Staphylococcus in 19(37.3%), Streptococcus in 17(33.3%), Enterococcus in 3(5.9%), fungus in 3(5.9%), and other bacteria in 5(9.8%) cases. Organism was not isolated in 6(11.8%) cases, and two organisms were isolated in 4(7.8%) cases. Dividing these patients into two groups according to the duration of preoperative antibiotic treatment(A: less than 7 days, B: more than 8 days), we compared the surgical results between the two groups. Result : There were 16 cases in group A and 35 in group B. Annular reconstruction was performed in 10(62.5%) cases in group A and 10(28.6%) cases in group B, which has statistically significance(p＜0.05). There was one early death in group B. Forty nine patients(96.1%) except two were followed up with mean follow-up duration of 28.7 $\pm$ 23.6 months. Endocarditis was recurred in one in group A, and two in group B. Three late deaths occurred in group B. Recurrence rate and survival were not statistically different between the two groups. Conclusion : Early surgery for active IE showed good results as the result of that which was performed after prolonged antibiotic treatment; therefore, we believe that early surgery for active If could effectively eradicate the infection.

• Journal of agricultural medicine and community health
• /
• v.38 no.1
• /
• pp.1-13
• /
• 2013

Objectives: This study is to investigate the prevalence and related factors of metabolic syndrome among Korean adults aged 20 years and above. Methods: From the database of the $5^{th}$ Korea National Health and Nutrition Examination Survey (KNHANES V) conducted in 2010, data of 5,670 adults who responded to all the questionnaires of health interview and had metabolic syndrome in the health examination were included in this analysis. SAS 9.2 was used for statistical analysis with complex sample survey modules and commands. Results: The prevalence rate of metabolic syndrome based on the criteria proposed by International Diabetes Federation (IDF) was 18.8%. The prevalence of metabolic syndrome in each group was: 20.7% of women, 43.1% among elderly over 70 years old, 40.6% of the divorced or the separated, 27.6% of recipients of economic support from the government, 23.6% of people who had alcohol dependency problem, and 43.7% of overweight or obese adults. Independent risk factors based on the multiple logistic regression analysis revealed that prevalence of metabolic syndrome was associated with female (odds ratio 1.59 [95% confidence interval 1.20-2.11]), age (50s 3.95 [2.11-7.37], 60s 5.62 [2.98-10.61], 70s 10.56 [5.25-21.25]), high school education (0.52 [0.37-0.74]), clerk occupation (2.14 [1.27-3.60]), divorced marital status (1.72 [1.15-2.59]), alcohol dependency (1.86 [1.16-2.98]), higher BMI (14.08 [10.60-18.70]). Conclusions: The metabolic syndrome is prevalent among Korean adult population according to IDF criteria. Several demographic characteristics and potentially modifiable factors are associated with metabolic syndrome. Identification of this high-risk group and management of these modifiable factors are warranted to reduce the prevalence of metabolic syndrome.

• Research in Plant Disease
• /
• v.11 no.1
• /
• pp.28-34
• /
• 2005

This study was conducted to investigate the control possibility of garlic white rot causing severe yield losses of Allium species and cultivars using cultural practices such as optimal sowing date and burial depth, and lime application. Inoculum density in infested field soil was investigated at different soil depth, and that on the diseased plant debris was done. Inoculum density and recovery ratio of white rot pathogen of garlic was highly different between two species of Sclerotium cepivorum forming comparatively small sclerotia and Sclerotium sp. forming comparatively large ones. It was confirmed that S. cepivorum formed more sclerotia on bulbs of garlic than S. sp., and sclerotial recovery of S. cepivorum was higher than that of S. sp. Inoculum density of white rot pathogen in the infested field at garlic seeding period ranged from one to thirteen sclerotia per 30 g soil. Inoculum density of white rot pathogen decreased remarkably with increasing soil depth and above 95% of sclerotia were distributed within 5 cm of soil depth. Disease severity of white rot was higher on slightly planted garlics than deeply-planted ones. Garlic seed bulbs infected by white rot pathogens were confirmed to be one of main inoculum sources of white rot in the field and the disease incidences caused by garlic seed transmission showed big differences among garlic varieties. When nine garlic varieties harvested from infested plots were sown in the field, highly susceptible varieties, ‘Wando’, ‘Daeseo’, ‘Namdo’ and ‘Kodang’ showed high disease incidences, whereas other five varieties were not infected at all. It was confirmed that white rot occurred higher on early-sown garlics, before middle October, than on late-sown ones, after late October. Meanwhile, increasing application rate of lime ranged from 100 to 300 g reduced disease severity of white rot.