• YAKHAK HOEJI
• /
• v.50 no.3
• /
• pp.160-165
• /
• 2006

Germanium is found in a range of minerals and ores and is present in foods including beans, tomato juice, oysters, tuna and garlic. Germanium is a non-metallic element, which can exist in valence states of 2 and 4. Clinical trials and use in private practices for more than a decade have demonstrated organic germanium's efficacy in treating serious disease including cancer, arthritis and senile osteoporosis. But it was rarely reported that inorganic germanium has biological properties. STB-BM contains mineral complex, rare earth elements and a little amount of Inorganic germanium. The experiment was carried out the anti-obesity effect. To investigate anti-obesity effect of STB-BM, we measured the effect of body weight, fat weight (subcutaneous fat, epididymal fat, visceral fat, kidney fat and total fat) and serum biochemical level in rats fed high fat diets. STB-BM 35 mg/kg suppressed the increasing ratio of body weight, epididymal fat weight, visceral fat weight, total fat weight, triglyceride and LDL-cholesterol (p<0.05).

• Journal of Radiation Protection and Research
• /
• v.10 no.1
• /
• pp.3-13
• /
• 1985

The sorption behavior of some typical fission products such as Cs-137, long-lived radionuclide; Ce-144, rare-earth element; and Co-60, corrosion product on zeolite A, zeolite F-9 (faujasite) and amorphous zeolite was determined with the salt concentrations, 0.01 M- to 2.0 M- nitric acid and ammonium nitrate, and the shaking time, 15 minutes interval from 15 minute to 90 minute. Kd values were obtained through the batch experiment. In conclusion, the optimal conditions for isolation and removal of the typical radionuclides are as following: zeolite, amorphous zeolite; concentration, $0.01\;M-HNO_3\;and\;0.1\;M-NH_4NO_3$; pH4; shaking time, one hour; the most effective species, Cs-137.

• Economic and Environmental Geology
• /
• v.33 no.1
• /
• pp.19-30
• /
• 2000

The Sannae-Eonyang granitic rocks are a large fossil hydrothermal system containing the Sannae Mo-W fissure-vein type and the Eonyang amethyst deposits in the southeastern Kyongsang Basin. They evolved through similar stages showing the similarities in chemical and mineralogical compositions, fractionation trends and early magmatic fluids. Major, trace and rare earth element(REE) variations can be accounted for fractional crystallization combined with variable degrees of metasomatism. Based on the aqueous fluids exsolved directly from the crystallizing melt, the Sannae-Eonyang granitic rocks were emplaced at similar depth or pressure conditions. High temperature fluid interaction with the granitic rocks affects the elements such as K, Na, Rb, Ba, Sr, Eu, and heavy REE (HREE) mostly through feldspar re-equilibration. Although hydrothermal fluids produced partly positive Eu anomalies and HREE depletion in the granitic rocks at the Sannae Mo-W mine, the chemical concentrations defining fractionnation trends have survived the effects of alteration. Aqueous fluids exsolved from the crystallizing melt appears to be widespread, whereas fluids of moderate to low salinity and low-density with relatively high homogenization temperatures and $Co_2$-rich fluids appear to be mainly restricted and responsible for Mo-W and amethyst mineralization, respectively. Hydrothermal system of the Sannae-Eonyang granitic rocks represents repeated fluid events; from exsolution of aqueous fluids from the crystallizing melt, through fluid immiscibility and meteoric convection to later mineralization.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.12
• /
• pp.2262-2267
• /
• 2010

In order to analyze the reason of wall blackening, which affect the decline of lifetime in a ceramic metal halide lamp, we carried out the deterioration of ceramic tubes by a change in operating conditions with arc tubes of two types of spherical and cylindrical, and we have confirmed the cause of wall blackening through the analysis of element composition and spectrum from SEM/EDS and spectrum analyzer. Wall blackening of tungsten was shown by sputtering from ignition in 20 minute on/off condition and wall blackening from chemical reaction between PCA wall and rare earth halides was shown significantly in a condition without on/off test. Especially, the wall blackening and the decline of luminous flux were reduced by inner convection in spherical type arc tube. Moreover, the color temperature and color coordinate were changed by reduction of emission spectrum of Dy which causes the chemical reaction with PCA wall.

• Journal of Korean Neurosurgical Society
• /
• v.56 no.6
• /
• pp.517-520
• /
• 2014

Cauda equina syndrome (CES) associated with dural ectasia is a rare neurologic complication in patients with longstanding ankylosing spondylitis (AS). We report a 68-year-old male with a 30-year history of AS who presented a typical symptom and signs of progressive CES, urinary incontinence and neuropathic pain of the lumbosacral radiculopathy. Computed tomography (CT) and magnetic resonance imaging (MRI) findings showed the unique appearances of dural ectasia, multiple dural diverticula, erosion of posterior element of the lumbar spine, tethering of the conus medullaris and adhesion of the lumbosacral nerve roots to the posterior aspect of the dural ectasia. Considering the progressive worsening of the clinical signs, detethering of the conus medullaris through resection of the filum terminale was performed through a limited laminectomy. However, the urinary incontinence did not improve and there was a partial relief of the neuropathic leg pain only. The possible pathogenetic mechanism of CES-AS and the dural ectasia in this patient with longstanding AS are discussed with a literature review.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.11
• /
• pp.1806-1812
• /
• 2016

We propose an interior permanent magnet syhchronous motor (IPMSM) with arc-shape ferrite permanent magnets (PMs) as a substitute for the rare-earth permanent magnet, and determine its optimal design through parametric study. First, we use 2D finite element analysis to analyze 4-poles and 6-slots initial model according to performance requirements and design parameters. The current angle of the maximum average torque considered in the analysis is different compared with the current angle of the minimum torque ripple. Thus, the parametric study for optimal rotor design is performed by varying the thickness and the offset radius of the PMs according to current angle. In particular, a narrow bridge is required in conventional IPMSM for reducing flux leakage; however, the increase in cogging torque in the analysis model saturates the narrow bridge (large offset radius). Therefore, we suggest an appropriate shape considering limiting conditions such as DC link voltage, average torque, torque ripple, and cogging torque taking into account performance requirements.

• Journal of Powder Materials
• /
• v.26 no.6
• /
• pp.463-470
• /
• 2019

Fe₃O₄/SiO₂/YVO₄:Eu³⁺ multifunctional nanoparticles are successfully synthesized by facile stepwise sol-gel processes. The multifunctional nanoparticles show a spherical shape with narrow size distribution (approximately 40 nm) and the phosphor shells are well crystallized. The Eu³⁺ shows strong photoluminescence (red emission at 619 nm, absorbance at 290 nm) due to an effective energy transfer from the vanadate group to Eu. Core-shell structured multifunctional nanoparticles have superparamagnetic properties at 300 K. Furthermore, the core-shell nanoparticles have a quick response time for the external magnetic field. These results suggest that the photoluminescence and magnetic properties could be easily tuned by either varying the number of coating processes or changing the phosphor elements. The nanoparticles may have potential applications for appropriate fields such as laser systems, optical amplifiers, security systems, and drug delivery materials.

• Journal of Korea Foundry Society
• /
• v.21 no.2
• /
• pp.127-134
• /
• 2001

Misch metal (rare earth element, Ce, La, Nd, Pr) which has large influence on high-temperature stability and toughness was added to the Al-5%Ni-5%Mg alloy, and squeeze casting was used for Al-5%Ni-5%Mg-(Mm) alloys. The effect of applied pressure and misch metal additions on mechanical properties in Al-5%Ni-5%Mg alloy by direct squeeze casting has been investigated. The applied pressure were 0 MPa(gravity casting), 25, 50 and 75 MPa. Squeeze-cast Al-5%Ni-5%Mg-(Mm) alloys had better mechanical properties than those of non-pressurized cast alloys because of the increased cooling rate by the application of pressure during solidification. By the addition of misch metal in Al-5%Ni-5%Mg alloy, better combination of strength and elongation was obtained. The addition of 0.3%Mm in Al-5%Ni-5%Mg alloy improved the heat resistant property due to the formation of fine eutectic phases.

• Journal of Korean Neurosurgical Society
• /
• v.53 no.1
• /
• pp.49-51
• /
• 2013

A case of traumatic spondyloptosis of the cervical spine at the C6-C7 level is reported. The patient was treated succesfully with a anterior-posterior combined approach and decompression. The patient had good neurological outcome after surgery. A-51-year-old female patient was transported to our hospital's emergency department after a vehicle accident. The patient was quadriparetic (Asia D, MRC power 4/5) with severe neck pain. Plain radiographs, computerize tomography and spinal magnetic resonance imaging (MRI) showed C6-7 spondyloptosis and C5, C6 posterior element fractures. Gardner-Wells skeleton traction was applied. Spinal alignment was reachived by traction and dislocation was decreased to a grade 1 spondylolisthesis. Then the patient was firstly operated by anterior approach. Anterior stabilization and fusion was firstly achieved. Seven days after first operation the patient was operated by a posterior approach. The posterior stabilization and fusion was achieved. Postoperative lateral X-rays and three-dimensional computed tomography showed the physiological realignment and the correct screw placements. The patient's quadriparesis was improved significantly. Subaxial cervical spondyloptosis is a relatively rare clinical entity. In this report we present a summary of the clinical presentation, the surgical technique and outcome of this rarely seen spinal disorder.

• Structural Engineering and Mechanics
• /
• v.52 no.1
• /
• pp.19-33
• /
• 2014

Structural robustness refers to the ability of a structure to avoid disproportionate consequences to the original cause. Currently attentions focus on the concepts of structural robustness, and discussions on methods of robustness based structural design are rare. Firstly, taking basis in robust $H_{\infty}$ control theory, structural robustness is assessed by $H_{\infty}$ norm of the system transfer function. Then using the SIMP material model, robustness based design of grid structures is formulated as a continuum topology optimization problem, where the relative density of each element and structural robustness are considered as the design variable and the optimization objective respectively. Generalized elitist genetic algorithm is used to solve the optimization problem. As examples, robustness configurations of plane stress model and the rectangular hyperbolic shell model were obtained by robustness based structural design. Finally, two models of single-layer grid structures were designed by conventional and robustness based method respectively. Different interference scenarios were simulated by static and impact experiments, and robustness of the models were analyzed and compared. The results show that the $H_{\infty}$ structural robustness index can indicate whether the structural response is proportional to the original cause. Robustness based structural design improves structural robustness effectively, and it can provide a conceptual design in the initial stage of structural design.