• Biomedical Science Letters
• /
• v.2 no.1
• /
• pp.49-55
• /
• 1996

The objective of this study was to develop a paper strip which could determine E. coli qualitatively and quantitatively in water, wastewater, drinks, or food. This paper strip method was a simple and rapid test method that determine E. coli by visual identification. In this study, nutrient culture media were formulated and characterized for optimum conditions. Paper strips were then prepared by impregnating into the media and dried at $60^\circ$C. The test procedure is quite simple to use. The paper strip was dipped into a sample, and excess sample was removed. The strip was then incubated at $37^\circ$C for 16 to 20 hours and the number of colonies on the strip was counted. The color of the colony spots produced by microorganisms varied depending on the media formulation. Violet-red spots were produced by E. coli. The test method was simple, rapid and no special laboratory equipment was necessary for visual identification. Therefore, this test method is applicable to on-site tests such as field tests or home tests. The paper strip method was compared with the standard agar plate method and Japanese commercial product. The method of the economical preparation of test strips was studied for production on industrial scale.

• The Journal of the Korean dental association
• /
• v.44 no.2 s.441
• /
• pp.115-122
• /
• 2006

Objective : The purpose of this study was to evaluate the dimensional errors between real tooth, 3D CT image and CARP model. Materials and Methods : Two maxilla and two mandible block bones with intact teeth were taken from two cadavers. Computed tomography was taken either in dry state and in wet state. After then, all teeth were extracted and the dimensions of the real teeth were measured using a digital caliper at mesio-distal and bucco-lingual width both in crown and cervical portion. 3D CT image was generated using the V-works $4.0^{TM}$ (Cybemed Inc., Seoul, Korea) software. Twelve teeth were randomly selected for CARP model fabrication. All the measurements of 3D Ct images and CARP models were made in the same manner of the real tooth group. Dimensional errors between real tooth, 3D CT image model and CARP model was calculated. Results : 1) Average of absolute error was 0.199 mm between real teeth and 3D CT image model, 0.169 mm between 3D CT image model and CARP model and 0.291 mm between real teeth and CARP model, respectively. 2) Average size of 3D CT image was smaller than real teeth by 0.149 mm and that of CARP model was smalier than 3D CT image model by 0.067mm. Conclusion : Within the scope of this study, CARP model with the 0.291 mm average of absolute eror can aid to enhance the success rate cf autogenous tooth transplantation due to the increased accuracy of recipient bone and donor tooth.

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.66-73
• /
• 2007

The Jewelry-relation industry is being placed in the crises which are serious with depression of domestic market, design development and a major force absence also high labor cost charge. The consumers have the value of the price preparation maximum and product differentiation which they want. The Jewelry CAD and RP equipment shorten cost of production enterprise which depended hand-metal work provided for the various design and a rapid new product. But until now, it was necessary to the original work of best condition casting vacuum cycle as difficult with direct casting of synthetic resin from RP equipment. I intend to imply significance about through the CAD and RP equipment application result with it analyses, after jewelry CAD and RP work applicable to direct casting will be possible and able to through the casting vacuum cycle produce the product which is suitable in the original production. Through the this paper jewelry secures a quality improvement of the product and discrimination characteristic being various competitive power of design and provide a new base in product production.

• Journal of the Korean Ceramic Society
• /
• v.45 no.11
• /
• pp.734-738
• /
• 2008

Ettringite$(3CaO{\cdot}Al_2O_3{\cdot}3CaSO_4{\cdot}32H_2O)$, one of the hydrated phase of Portland cement is usually formed in the early stage of hydration by the reaction of tricalciumaluminate$(C_3A)$ and gypsum. The rapid and strong crystal growth of separated rod-shaped ettringite have been utilized for the preparation of special cements of rapid setting, high strength and non-shrinking properties. The ettringite also has been noticed as a promising materials for the immobilization of various waste ions because of its unique crystal structure which has abundant channels and exchangeable ionic compounds. In this study, the formation and growth behavior of the ettringite was investigated in the system $C_3A-CaSO_4-H_2O$ using $C_3A$ clinker and gypsum to obtain a microporous body for waste ion immobilization. Ettringite was revealed to form by the dissolution-precipitation mechanism and the bulk body was by the entangled growth of rod-shaped ettringite crystals. The hardened body was composed of nearly pure rod-shaped ettringite interlocked each other with adequate mechanical strength. The homogeneity of structure, pore size, specific surface area and porosity of the hardened body were influenced by reaction temperature, water/powder ratio and the curing time. The hardened body prepared with water/powder ratio of 1 at $24^{\circ}C$ for one day showed excellent morphological properties for the purposed materials.

• Journal of Adhesion and Interface
• /
• v.14 no.3
• /
• pp.128-134
• /
• 2013

This study investigated the natural adhesives for ceramics conservation that can be used as a substitution for synthetic resins. Samples were prepared by mixing lacquer with animal glue and the structure and adhesion properties of the samples were analyzed. The structure analysis with FT-IR showed that carbonyl (C=O), amine (N-H) and aromatic (C=C) bonds are increased by adding animal glue on lacquer. Comparing to the viscosity and tensile strength of the sample to the Paraloid B-72 and Araldite rapid type, these natural adhesives can be a substitution for the synthetic resins. Through methodical and intensive study, we expect practical uses of this eco-friendly natural adhesives for ceramics conservation.

• Journal of Korean Academy of Nursing
• /
• v.3 no.2
• /
• pp.15-30
• /
• 1973

Nursing education in Korea has made rapid progress recently. There is .: great deal of support with approval and encouragement of this progress. However, much disapproval of its validity has asserted some restraints on it. The aims of nursing education should be based on the principle that education is planned according to tile need much research has been made with such a viewpoint but much still remains unclear. The present study is aimed at establishing the needs for nursing manpower based on the biological demand for medical care. The needs for nursing manpower have been emphasized by many researchers and authorities on nursing education, and the prevailing medical trends also demand it. In this study, through the study of various hooks and records concerned, and the compiling of data analysis and questionnaires, I came to the following figures for the proposed needs of nursing manpower: There figures are greater than those calculated by another method by the government research program but it shows approximately the same final figure as that of the government report for the end of the target year. With these findings, I concluded that: 1) As the final purpose of the government medical project is to fulfill the needs of the national health (that is, to support the national needs for medical care), the plan of this project should follow the theory of biological demand for medical care, recognizing that the numbers will increase gradually. 2) Qualitative growth, based on the advanced and specialized nursing profession. should be promoted to meet the rapid growth of the medical needs of the nation in addition to promoting of investments for the facilities. and of the preparatory investments for education needs. 3) For efficient and economic utilization of nursing manpower, the improvement of wages, and the offering of free education is necessary. 4) Amendments to the low promising innovation and advancement of medical treatment; preparation of a national fund for medical care; and, changing of national attitudes to bring about greater concern are desirable.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.12 no.1
• /
• pp.62-68
• /
• 1999

Ferroelectric $Sr_{0.7}/B_{2.3}(Ta_{1-x}Nb_x)_2O_9$(x=0, 0.1, 0.2, 0.3) thin films were deposited on $Pt/SiO_2/Si$ substrate by MOD(Metalorganic Decomposition) process. Metal carboxylate and metal alkoxide were used as precursors, and 2-methoxyethanol, xylene as solvents. After spin coating, thin films were pre-annealed at $400^{\circ}C$, followed by RTA(Rapid Thermal Annealing) and final annealing at $800^{\circ}C$ in oxygen atmosphere. These procedures were repeated three times to obtain thin films with the thickness of $2000{\AA}$. To enhance the nucleation and growth of layered-perovskite phase, thin films were rapid-thermally annealed above $720^{\circ}C$ in oxygen atmosphere. As RTA temperature increased, fluorite phase was transformed to layered-perovskite phase. And the change of Nb contents affected dielectric / electrical properties and microstructure. The ferroelectric characteristics of $Sr_{0.7}/B_{2.3}(Ta_{1-x}Nb_x)_2O_9$ thin film were Pr=8.67 $\mu{C}/cm^2$, Ec=62.4kV/cm and $I_{L}=1.4\times10^{-7}A/cm^2$ at the applied voltage of 5V, respectively.

• Journal of Preventive Medicine and Public Health
• /
• v.39 no.2
• /
• pp.165-170
• /
• 2006

Objectives : The determination of oxalate in urine is required for the diagnosis and treatment of primary hyperoxaluria, idiopathic stone disease and various intestinal diseases. We examined the possibility of using Fourier transform near-infrared (FT-NIR) spectroscopy analysis to quantitate urinary oxalate. The practical advantages of this method include ease of the sample preparation and operation technique, the absence of sample pre-treatments, rapid determination and noninvasiveness. Methods : The range of oxalate concentration in standard urine solutions was $0-221mg/{\ell}$. These 80 different samples were scanned in the region of 780-1,300 nm with a 0.5 nm data interval by a Spectrum One NTS FT-NIR spectrometer. PCR, PLSR and MLR regression models were used to calculate and evaluate the calibration equation. Results : The PCR and PLSR calibration models were obtained from the spectral data and they are exactly same. The standard error of estimation (SEE) and the % variance were $10.34mg/{\ell}$ and 97.86%, respectively. After full cross validation of this model, the standard error of estimation was $5,287mg/{\ell}$, which was much smaller than that of the pre-validation. Furthermore, the MCC (multiple correlation coefficient) was 0.998, which was compatible with the 0.923 or 0.999 obtained from the previous enzymatic methods. Conclusions : These results showed that FT-NIR spectroscopy can be used for rapid determination of the concentration of oxalate in human urine samples.

• Nuclear Engineering and Technology
• /
• v.8 no.1
• /
• pp.1-8
• /
• 1976

For tile rapid production of fluorine-18 for medical use, the up-to-date methods of separation such as the recoil separation, the alumina column chromatography, and the distillation are reviewed. The amount of the residue, the gamma emitting impurity, and the tritium content in the product obtained by each separation method are determined. The product obtained by the nuclear recoil separation or by the alumina column chromatography is inferior to that obtained by the distillation in the purity point of view. Thus, the separation by the distillation is tile most effective especially in the case of using a natural lithium carbonate target. Carrier free fluorine-18 of about 2 mCi can routinely be produced by irradiating 7g of the natural lithium carbonate under the neutron flux of about 1$\times$10$^{13}$ n/$\textrm{cm}^2$/sec for 3 hrs, and subsequent separation by the distillation. The over-all processing time is 35-40n1in.

• The Journal of Society for e-Business Studies
• /
• v.26 no.1
• /
• pp.67-78
• /
• 2021

The number of domestic e-commerce transactions has been breaking its own record by an annual average growth rate of over 20% based on volume for the past 5 years. Due to the rapid increase in e-commerce market, retail companies that have difficulty meeting consumers in person are in fierce competition to take the lead in the last mile service, which is the only point of contact with customers. Especially in the delivery area, where competition is most intense, the role of the fulfillment center is very important for service differentiation. It must be capable of fast product preparation ordered by consumers in accordance with the delivery service level. This study focuses on the order picking system for rapid order processing in the fulfillment center as an alternative for companies to gain competitive advantage in the e-commerce market. A mixed integer programming model was developed and implemented to optimize the stock replenishment in order picking facilities. The effectiveness was scientifically and objectively verified by simulation using the actual operation process and data.