• Korean journal of applied entomology
• /
• v.36 no.3
• /
• pp.249-255
• /
• 1997

The sublethal temperature (5$^{\circ}$C for 2hr) led the fifth instar larvae of beet armyworm, Spodoprern exigucr (Hiibner), to increase cold tolerance to subzero lethal temperatures ( 'rapid cold hardening' ). The strength of rapid cold hardening was, however, varied among different populations which showed different cold tolerance in response to cold temperatures. To analyse the physiological factors affecting the rapid cold hardening, hernolymph osmolalities. supercooling points, glycerol contents, and cold stress proteins were measured by treating the fifth instar larvae with the sublethal low temperatures. The treated larvae showed increase of hemolymph osmolalities and glycerol contents. Changes of the osmolalities were greater in cold-hardy strains than in cold-susceptible strains. The sublethal temperature also induced them to express the cold-stress proteins (I0 - 20kD) in the hemolymph. but did not to change supercooling points.

• The Korean Journal of Soil Zoology
• /
• v.3 no.1
• /
• pp.9-16
• /
• 1998

Effects of temperature, pH, and salt concentration on the preservation of the infective juvenile entolopathogenic nematodes, Steinernema carpocapsae, were analyzed. The effects of acclimation to sublethal low temperature and glycerol concentrations on rapid cold hardening of the nematodes were also evaluated to set up the conditions for their cryopreservation. All tested environmental factors could change the storage effectiveness of the nematodes. These analyses indicated that the optinal storage condition for the nematodes consisted of $15^{\circ}C$, pH 8.5, and 0.5-1.0% salt concentration. The nematodes showed a rapid could hardening in response to $5^{\circ}C$ for 2h. Glycerol induced the nematodes to increase the cold hardiness. Its high concentration over 10%, however, gave a harmful effect on the nematode survival.

• Korean journal of applied entomology
• /
• v.60 no.2
• /
• pp.193-199
• /
• 2021

Solenopsis japonica, which is belonging to Formicidae in Hymenoptera, is a native ant species in Korea. However, it had not been studied for cold hardiness of S. japonica to understand on its overwintering mechanisms in field so far. Cold tolerance on developmental stages was measured at different cold temperature with various exposure times. Workers showed more survival at 5℃ and 10℃ compared with other stages and elevated cold tolerance when workers were exposed at 15℃ for more than 12h incubation as a rapid cold hardening (RCH) condition. RCH treatment not only increased survival of workers at cold temperatures, but also decreased supercooling point (SCP) and freezing point (FP). RCH group increased the survival rate by 44% at 10℃ compared with Non-RCH group. SCP and FP were depressed from -10.0 to -14.2℃ and from -11.3 to -15.3℃, respectively, after RCH treatment. Cold temperature increased expression level of cold- and stress-related genes such as glycerol kinase and heat shock protein. These results indicate unacclimated cold tolerance of S. japonica and its acclimation to low temperature by RCH.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.59-66
• /
• 2013

Because ordinary concrete cannot be hardened well under sub-zero temperatures, anti-freeze agents are typically added to prevent the frost damage and to ensure the proper hardening of concrete. With the advantage of a rapid exothermic reaction property, jet set concrete may be used as a cold weather concrete because it can reach the required strength before being damaged by cold weather. Recent studies are reported that magnesia-phosphate composites can be hardened very quickly and hydrated even in low temperature, which can be used as an alternative of severe cold weather concrete in arctic regions. This study developed the magnesia-phosphate composites that can be used in severe cold regions and suggested an appropriate mixture design from the experimental results.

• Composites Research
• /
• v.35 no.5
• /
• pp.309-316
• /
• 2022

The demand for cold-resistant cable material is increasing due to the rapid increase in the development of devices that operate in a low temperature environment. Cold tolerance of a thermoplastic polymer largely depends on the type and content of about 20 or more additives used to make the polymer. The phenomenon of polymer hardening at low temperature can be classified into hardening by simple temperature effect, embrittlement at the glass transition temperature, and hardening by crystallization of polymers that tend to crystallize. In this study, a thermoplastic polymer having a low glass transition temperature, a flame retardant, and an additive were mixed to evaluate the mechanical properties of a thermoplastic polymer composite material for electric wires. It has been confirmed that mechanical properties and processability are determined depending on the additives and compatibilizers added, and this study is considered to be useful as basic data for optimization to meet the performance requirements of wires developed for low-temperature use.

• Journal of Powder Materials
• /
• v.19 no.4
• /
• pp.317-321
• /
• 2012

In this study, Cu-5Ni-10Sn(wt%) spinodal alloy was manufactured by gas atomization spray forming, and the microstructural features and mechanical properties of Cu-5Ni-10Sn alloy have been investigated during homogenization, cold working and age-hardening. The spray formed Cu-5Ni-10Sn alloy consisted of an equiaxed microstructure with a mixture of solid solution ${\alpha}$-(CuNiSn) grains and lamellar-structure grains. Homogenization at $800^{\circ}C$ and subsequent rapid quenching formed a uniform solid solution ${\alpha}$-(CuNiSn) phase. Direct aging at $350^{\circ}C$ from the homogenized Cu-5Ni-10Sn alloy promoted the precipitation of finely distributed ${\gamma}$' or ${\gamma}-(Cu,Ni)_3Sn$ phase throughout the matrix, resulting in a significant increase in microhardness and tensile strength. Cold working prior to aging was effective in strengthening Cu-5Ni-10Sn alloy, which gave rise to a maximum tensile strength of 1165 MPa. Subsequent aging treatment slightly reduced the tensile strength to 1000-1100 MPa due to annealing effects.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.181-184
• /
• 2009

The hot press farming process, which is the press hardening of steel parts using cold dies, can utilize both ease of shaping and high strength due to the hardening effect of rapid quenching during the pressing. In this study, a thermo-elastoplastic analysis of the hot press forming process using the finite element method was performed in order to investigate the deformation behavior and temperature history during the process and the mechanical properties of the pressed parts.

• Journal of Welding and Joining
• /
• v.22 no.1
• /
• pp.43-49
• /
• 2004

Contact tip is located so near to welding arc that it is heated to high temperature during long time welding. In such a situation, tip changes in its microstructure and in turn its mechanical properties. This study was intended to investigate those changes by using simulated heat treatment. As a result of this study, it was confirmed that tip of Cu-P alloy hardened with severe cold deformation lose its initial hardness to a large extent within 60 min due to the occurrence of rapid recrystallization while that of Cu-Cr composition hardened by proper aging treatment can preserve its intial hardness for about 1,000 min or longer. Based on these results, suggested was a guideline that can classify contact tips into two different grades: deformation-hardened type and precipitation-hardened type. Following a guideline, a tip with Cu-Cr composition can be classified into the deformation-hardened type if it is in the over-aged condition. Such a guideline is well described.

• The Journal of the Korea Contents Association
• /
• v.16 no.1
• /
• pp.52-59
• /
• 2016

For almost of concrete structures by placing in cold weather, it is very important that the selection of curing method at early aged construction stage. The Exothermic curing method with hot wire and rapid hardening cement is used mostly to prevent the initial cracks and the strength decrease. Most of the construction sites, however, have not been applied to the optimal curing method caused by the simple approaches and the empirical judgements. Therefore, this paper has proposed a evaluation algorithm of the exothermic curing method for representing heating temperature, period, position of hot wire by analyzing the transient heat transfer solution. This has been implemented, moreover, using an object oriented programming language to develop structural analysis system taking account risk parameters. This system is composed of input module, database module, database store module, analysis module, and result generation module. Linkage interface between the central database and each of the related module is implemented by the visual c# concept. Graphic user interface and the relational database table are supported for user's convenience.

• Korean journal of applied entomology
• /
• v.36 no.3
• /
• pp.256-263
• /
• 1997

Supercooling points (SCP) and cold tolerance of the tobacco cutworm, Spodol~rera litura Fabricius. were measured in response to subzero temperatures. SCPs were varied among developmental stages. Eggs showed the lowest SCP (-27$^{\circ}$C). Pupae and adults had the intermediate SCP(- 18$^{\circ}$C). The SCPs (- I0 to - 16$^{\circ}$C) of larvae increased with their ages. Lethal low temperature of each stage was higher than its SCP. Preexposure of eggs and larvae to a sublethal low temperature increased their survival capacities under lethal low temperatures. The sublethal temperature also induced the fifth instar larvae to increase hemolymph osmolality and to produce cold-induced proteins of apparent molecular weights of 20 and 27 kD. These results indicate that this species is classified into a freeze-susceptible insect.