• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.17-27
• /
• 1998

Study on growth change of dental arch is considered to both an important data in orthodontic diagonsis and treatment planning as well as analysis of treatment results , also, arch form is important in anthropology and dentistry, even more so in prosthodontics and orthodontics. In the field of orthodontics, studies on the functional aspect of upper and lower teeth and maintenance of stability of dentition and occlusion were carried out from the early days. Some of the early studies include explanation of growth change in dental arch from measuring directly fom human stroll, and afterwards, cephalometrics x-rays were introduced; accordingly, studies using cephalometric measurement and linear measurements of study models were often performed. By this method, arch width, arch depth and perimeters were measured, and growth change or dental arch was studied. The subject ror this study were sn children(boys and girls or ages from 3 yens to 12 years from Kang-won district and Seoul, who has no history of orthodontic treatment and who show healthy status and normal growth and development. Cephalometric x-ray, panoramic x-ray, and study model were taken for each subject consecutively for 2 years, and the subjects are still followed up. 400 pairs of study models from the past two years were used in this study; mesio-distal diameater of each tooth, intercanine width, intermolar width, canine depth, molar depth and arch perimeters were measured. Afterwards, mean value and each standard deviation of each age group and each gender were obtained, and representation graph were drawn. The following conclusion were obtained. 1. Intercanine width showed gradual increase until the age of 10-years and after that, showed no increase. 2. Intermolar width in upper arch showed gradual increase : intermolar width in lower arch showed no significant chang, and after the age of 9-years, showed increase. 3. Cainine arch depth showed relatively rapid increase after the age of 6-years, and this pattern was more obvious in lower arch. 4. Molar arch depth increased gradually in both archs and it decrease after the age of 10-years : this phenomenon was more prominent in the lower arch. 5. Arch perimeter showed gradual inerease and convert to plateau at the age of 10-years, after that, it decreased. this pattern was more prominent in lower arch.

• Journal of the Korean Geographical Society
• /
• v.30 no.2
• /
• pp.146-168
• /
• 1995

problems involved in defining and identifying it. However, data on ownership of business establishments may be useful and one of the best alternatives for this empirical research because of use of limited information about control This study examines the spatial patterns of external control in the Korean manufacturing activities between 1986 and 1992. Using the data on ownership iinkages of multilocational firms between 15 administrative areas, it was possible to construct a matrix of organizational control in terms of the number of establishments. The control matrix was disaggregated by three types of manufacturing industries according to the capital and labor requirements of production processes used in. On the basis of the disaggregated control matrix, a series of measures were calculated for investigating the magnitude and direction of control as well as the external dependency. In the past decades Korean industrialization development has risen at a rapid pace, deepening integration into the world economy, together with the continuing growth of the large industrial firms. The expanded scale of large firms led to a spatial separation of production from control, Increasing branch plants in the nation. But recent important changes have occurred in the spatial organization of production by technological development, increasing international competition, and changing local labor markets. These changes have forced firms to reorganize their production structures, resulting in changes of the organizational structures in certain industries and regions. In this context the empirical analysis revealed the following principal trends. In general term, the geography of corporate control in Korea is marked by a twofold pattern of concentration and dispersion. The dominance of Seoul as a major command and control center has been evident over the period, though its overall share of allexternally controlled establishments has decreased from 88% to 79%. And the substantial amount of external control from Seoul has concentrated to the Kyongki and Southeast regions which are well-developed industrial areas. But Seoul's corporate ownership links tend to streteh across the country to the less-developed regions, most of which have shown a significant increase of external dependency during the period 1986-1992. At the same time, a geographic dispersion of corporate control is taking place as Kyongki province and Pusan are developing as new increasingly important command and control reaions. Though these two resions contain a number of branch plants controlled from other locations, they may be increasingly attractive as a headquarters location with increasing locally owned establishments. The geographical patterns of external control observable in each of three types of manufacturing industries were examined in order to distinguish the changing spatial structures of organizational control with respect to the characteristics of the production processes. Labor intensive manufacturing with unskilled iabor experienced the strongest external pressure from foreign competition and a lack of low cost labor. The high pressure expected not only to disinte-grate the production process but also led to location of production facilities in areas of cheap labor. The linkages of control between Seoul and the less-developed regions have slightly increased, while the external dependency of the industrialized regions might be reduced from the tendency of organizational disintegration. Capita1 intensive manufacturing operates under high entry and exit barriers due to capital intensity. The need to increase scale economies ied to an even stronger economic and spatial oncentration of control. The strong geographical oncentration of control might be influenced by orporate and organizational scale economies rather than by locational advantages. Other sectors experience with respect to branch plants of multilocational firms. The policy implications of the increase of external dependency in less-developed regions may be negative because of the very share of unskilled workers and lack of autonomy in decision making. The strong growth of the national economy and a scarcity of labor in core areas have been important factors in this regional decentralization of industries to less-developed regions. But the rather gloomy prospects of the economic growth in the near future could prevent the further industrialization of less-developed areas. A major rethinking of regional policy would have to take place towards a need for a regional policy actively favoring indigenous establishments.

• Korean Journal of Occupational Health Nursing
• /
• v.6 no.2
• /
• pp.144-155
• /
• 1997

In December 1990, Occupational Safety and Health Law was amended to reinforce employer's responsibilities on employees' health and safety. Among the amended law it was important to expand the role of an occupational health nurse to the role of an occupational health manager. An occupational health manager should take charge of coordinating periodic health examination and environmental hazard evaluation, providing primary care, monitoring employees' health status, giving the workplace walk-through, selecting safe protection equipment, providing health information, counseling and health education, independently. This position of occupational health nurse is equivalent to the role of doctors or occupational hygienists. In 1991, government made a master plan to prevent occupational disease and injury. Under the plan, Korea Industrial Nursing Association (KINA) was established in 1994 with the purpose of improving health services and upgrading career opportunities for members. Therefore, this study was designed to analyze the transition of occupational health nursing education with the changes of law and policy in Korea between 1991 and 1996. In details, it was to analyze the rate of school providing occupational health nursing practice based lecture, lecture hours, lecture contents in undergraduate curriculum, program contents of graduate school, kinds of continuing education, etc. For this purpose, we conducted survey two times. In February 1991, baseline study was conducted with all nursing programs in Korea (19 BSN programs and 43 nursing departments of junior college). From April to May in 1996, the second survey was conducted with all nursing programs (38 BSN programs and 69 junior colleges). The first response rate was 66.1% and the second was 40.6%. Structured questionnaires were mailed to the deans or the community health nursing faculties. In the case of graduate school, telephone survey was conducted with 10 school of public health or environmental health area. Data from the yearbook of Industrial Safety Training Institute (ISTI), the history of Korea Industrial Health Association, and the journals of KINA were also included in the analysis. As the results, we found that there were remarkable improvement in undergraduate and graduate programs, obligatory as well as voluntary continuing education in terms of occupational health nursing expertise between 1991 and 1996. 1) The number of school providing occupational health nursing practice-based lecture was increased with the rate from 7.3% to 25.6%. The rate of school giving over 15 class-hours was increased from 33.3% to 46.6%. 2) Content areas were composed of introduction of occupational health, occupational epidemiology, industrial hygiene, occupational disease and injury, law and policy, health education, concept of occupational health nursing, role of occupational health nurse, occupational health nursing process, etc. Of content areas, occupational health nursing process was more emphasized with the increased rate from 43.9% to 88.4%. 3) In the case of graduate school, occupational health programs were increased from 4 to 10. One of them has developed occupational health nursing program as an independent course since 1991. 4) The law increased educational hours from 28 hours to 36 hours for introductory course at the time of appointment, and from 14 hours to 24 hours every 2 years for continuing education. Course contents were Occupational safety and health law, introduction of occupational health, health education methodology, planning and evaluation, periodic health exam, occupational disease care, primary care, emergency care, management, industrial environment evaluation, etc. In 1996, Korea Industrial Nursing Association has begun to provide continuing education after Industrial Safety Training Institute. 5) Various educational programs in voluntary base were developed such as monthly seminar, CE articles, annual academic symposium, etc. It was shown that changes of law and policy led rapid growth of occupational health nursing education in various levels. From this trend, it is expected that occupational health nurse expertise be continuously to be enhanced in Korea. Legal and political supports should proceed for the development of occupational health nursing in early stage.

• Journal of Environmental Impact Assessment
• /
• v.27 no.2
• /
• pp.203-214
• /
• 2018

The purpose of this study is to estimate the concentrated distribution area of nutria (Myocastor coypus) and potential suitable habitat and to provide useful data for the effective management direction setting. Based on the nationwide distribution data of nutria, the cross-validation value was applied to analyze the distribution density. As a result, the concentrated distribution areas thatrequired preferential elimination is found in 14 administrative areas including Busan Metropolitan City, Daegu Metropolitan City, 11 cities and counties in Gyeongsangnam-do and 1 county in Gyeongsangbuk-do. In the potential suitable habitat estimation using a MaxEnt (Maximum Entropy) model, the possibility of emergency was found in the Nakdong River middle and lower stream area and the Seomjin riverlower stream area and Gahwacheon River area. As for the contribution by variables of a model, it showed DEM, precipitation of driest month, min temperature of coldest month and distance from river had contribution from the highest order. In terms of the relation with the probability of appearance, the probability of emergence was higher than the threshold value in areas with less than 34m of altitude, with $-5.7^{\circ}C{\sim}-0.6^{\circ}C$ of min temperature of the coldest month, with 15-30mm of precipitation of the driest month and with less than 1,373m away from the river. Variables that Altitude, existence of water and wintertemperature affected settlement and expansion of nutria, considering the research results and the physiological and ecological characteristics of nutria. Therefore, it is necessary to reflect them as important variables in the future habitable area detection and expansion estimation modeling. It must be essential to distinguish the concentrated distribution area and the management area of invasive alien species such as nutria and to establish and apply a suitable management strategy to the management site for the permanent control. The results in this study can be used as useful data for a strategic management such as rapid management on the preferential management area and preemptive and preventive management on the possible spreading area.

• Economic and Environmental Geology
• /
• v.34 no.3
• /
• pp.271-281
• /
• 2001

The characteristics of the heavy metal contamination in the soils affected by the tailings of the Palbong mine have been studied. The soils in the studied area consist mostly of loam by the particle size analysis, but a little of it, located near the stream, consist of loamy sand to sandy loam, finally to loam downward. The organic contents of soils are significantly low aoom 2 percent and the pH is in acidic ranging 6.0 $\pm$ 0.1. The samples of the parent rocks, the normal soils, the tailings and the channel deposits from the studied area were chemically analysed. From the result, the heavy metal concenlration of the soils is a little Jow compared with that of the parent rocks, shows the hydrologic process of the surface and the groundwater. The contamination of the tailings from the ore mining are high in lead, copper and arsenic. In the channel deposits the concenlrations of lead and copper are abnormally high but that of arsenic is uniquely low. And most of heavy metal contamination are decreased with the distance from the mine. It is caused by the properties of the surface and the ground water during the process of the heavy metal migration. The correlation-coefficient between sand and silt contents and the concentrations of Cd, Cu and Pb are significant but the amounts of As and Hg are increased with the clay contents. The dispersion of the heavy metals with the distance shows that the concentrations of them in the soils sampled at distance of 100 m to 200 m along the stream started near the Palbong mine are extremely high compared with those from other distances. These discrepancies are significant in Cd, Cu, Pb and Hg, but low in As. All the samples contain below detection limit of Cr+6 In the present stream water the concentrations of the heavy metals are not detected. So, it is interpreted that the concentrations in the soils are caused by the activities of the mining during the operation and have been continued by the dispersion from the tailings since after the closure of the mining, especially by the surface and ground water. The concentrations are diminished with the distance from the mining site, but in the interval of 800-2000 m increases abruptly. In the soil samples counted on the dispersion direction by wind, the lowering of the concentration is relatively uniform with the distance from the mining site. So, the rapid increase of the heavy metal concentrations is presumed to have been caused by the ground-water movement. In the migration of the heavy metals, the groundwater conditions, such as pH, Eh, the contents of colloidal particles, and Mn and Fe oxides are closely involveo. Integrating with these factors, it is interpreted that the groundwater conditions which have caused the heavy metal contamination of the studied area are those that the pH is about 3 in oxidized conditions, the contents of the colloidal particles are low, and Mn and Fe oxides are not involved in the migration of the heavy metals. Meanwhile, the vegetables growing on the soils in the studied area are not affected by the contamination of the heavy metals.

• Journal of Animal Science and Technology
• /
• v.46 no.1
• /
• pp.83-90
• /
• 2004

Processed meals, such as a ground meat and hamburger patty, are required to ensure that no pathogens remain in the final products. However, there was no rapid method available to verify that the recommended end-point cooking temperature(EPT) was reached. Thus, the objective of this study was to rapidly determine EPT of ground pork hams using sodium dodecyl sulfate-polyacrylamide gel electrophoresis(SOS-PAGE), based on the disappearance of sarcoplasmic proteins after cooking. Fresh pork hams were added two levels of salt(0, 2%) and fat(15, 25%) combinations, and stored in refrigerator overnight, and cooked to internal cooking temperatures of $64^{\circ}C$ to $74^{\circ}C$ with $2^{\circ}C$ increments. Cooked pork hams were measured cooking loss(CL, %), protein solubility(PS) and SOS-PAGE. CL(%) was reduced with the addition of 2% salt, as compared to the control, regardless of fat contents. It was also increased with increasing eooking temperature. Protein solubility was affected by the cooking temperature, resulting in reduced PS up to $64^{\circ}C$(P < 0.05), but remained constant higher than $68^{\circ}C$. In SOS-PAGE analysis, protein bands with the molecular weights of 36 and 66 kDa were affected by the addition of salt and fat combinations. regardless of treatments. These protein fractions were decreased gradually with increased cooking temperatures up to $68^{\circ}C$ ${\sim}$ $70^{\circ}C$ and might be good indicators for the determination of EPT in ground pork hams.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.6
• /
• pp.373-379
• /
• 2001

The weathering rates and change of chemical composition of 6 residual Entisols derived from granite, granite-gneiss, limestone, sandstone, shale, amd basalt in Korea were studied. The chemical composition of each profile with parent rocks were determined using XRF with the physico-chemical properties and the morphology of soils. In the A horizons of all the soils except Euiseong series, the content of clay, organic matter and cation exchange capacity(CEC) showed higher than those of C horizon, but bulk density and pH showed lower than C horizon. Clay content in the soil from sandstone was decrease with soil depth, which may caused by the elluriation. In total element analysis. $SiO_2$ was high in the soil from granite. granite-gneiss, sandstone and compare with basalt and limestone. $Fe_2O_3$ and MgO was high in the soil from basalt, limestone and shale compare with granite. granite-gneiss and sandstone. And ignition loss was particularly high in the soil from basalt and limestone. The rate of element loss was higher in base cations(Ca, K, Mg, Na) than Si, Al, Fe in the soils. The concentrations of $TiO_2$ in the A horizon compare with that of the C horizon was due to resulting from losses of other less stable elements existed. Considering with relative rate of each elements in soils, $SiO_2$ and $Al_2O_3$ which originated from sandstone and granite, granite-gneiss, sandstone, shale, and basalt were lost higher than those from lime tone, but loss of basic cations were more in the soil from limestone which may be rapid weathering of calcite. The magnitude of losses of the overall elements were increased in the order of the soils from sandstone and granite ${\gg}$ limestone and shale) granite-gneiss and basalt.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.14 no.2
• /
• pp.197-202
• /
• 2010

Purpose: Recently, many hospitals have been tried to increase the satisfaction of the outpatients through blood-gathering, exam, result notice and process in a day. Each laboratory has been used the automatic equipment for the rapid requests of the result notice and the increase of the reliability and efficiency. Current automatic equipments that have been limited short TAT(Turn-Around Time)because of the restricted batch lists and 1 tip-5 detectors. The Gamma Pro which is made in Korea to improve the shortcomings of existing automation equipment, complemented with capacity to perform a wide range of domestic automation equipment. In this study, we evaluated the usefulness and reliability of short TAT by comparing Gamma Pro with current automatic equipment. Materials and Methods: We studied the correlation between Gamma Pro and RIA-mat 280 using the respective 100 specimens of low or high density to the patients who were requested the thyroid hormone test (Total T3, TSH and Free T4) in Samsung Medical Center Sep. 2009. To evaluate the split-level Gamma Pro, First, we measured accuracy and carry over on the tips. Second, the condition of optimal incubation was measured by the RPM (Revolution Per Minute) and revolution axis diameter on the incubator. For the analysis for the speed of the specimen-processing, TAT was investigated with the results in a certain time. Result: The correlation coefficients (R2) between the Gamma Pro and RIA-mat 280 showed a good correlation as T3 (0.98), TSH (0.99), FT4 (0.92). The coefficient of variation (C.V) and accuracy was 0.38 % and 98.3 % at tip 1 and 0.39 % and 98.6 % at tip 2. Carry over showed 0.80 % and 1.04% at tip 1 and tip 2, respectively. These results indicate that tips had no effect on carry over contamination. At the incubator condition, we found that the optimal condition was 1.0mm of diameter at 600RPM in 1.0mm and 1.5mm of at 500RPM or 1.0mm and 1.5 mm of diameter at 600 RPM. the Gamma Pro showed that the number of exam times were increased as maximum 20 times/day comparing to 6 times/day by current automatic equipment. These results also led to the short TAT from 4.20 hour to 2.19 hours in whole processing. Conclusion: The correlation of between the Gamma Pro and RIA-mat 280 was good and has not carry over contamination in tips. The domestic automation equipment (Gamma Pro) decreases the TAT in whole test comparing to RIA-280. These results demonstrate that Gamma Pro has a good efficiency, reliability and practical usefulness, which may contribute to the excellent skill to process the large scale specimens.

• Childhood Kidney Diseases
• /
• v.4 no.1
• /
• pp.48-56
• /
• 2000

Purpose: Alport SD., the most common herectitary rephriris, is a renal disease with rapid progression. Deafness, ocular abnormalities and a specific EM finding may be associated in addition to a family history. We have aralyged retrospectively. Methods: We observed 12 children with Alport syndrome who were diagnosed at Dept. of pediatrics in Kyunghee Univ., College of Medicine, from Apr. 1991 until Jun. 1999. We used four criteria for diagnosis: renal disease, family history, deafness or eye abnormalities, and a specific finding in electron microscopy Results: 2 of 12 patients had all features of the four diagnostic criteria. We could not trace an exact family history in 3 patients, and 6 patients did not exhibit deafness or eye abnormality. One could not have renal biopsy because offer chronic renal failure. Other three criteria were observed in her. The ratio of male to female observed was 1:2 respectively and the mean age of initial renal symptom was 5.6 years. 9 of 12 patients had a family history of renal disease. In the audiogram and ocular examination for 11 of 12 cases, sensorineural hearing loss was observed in 6 and ocular abnormality in 2 cases. In electron microscopic finding, irregular thickness of the capillary basement membranes with lamination of lamina densa and foot process obliteration was noted in 9 of 11 and thin basement membrane with splitting and foot process obliteration was noted in the other 2. The mean period of follow-up was 3 6/12 years. And one patient developed the chronic renal failure until now and had kidney transplantation. Conclusion: For the diagnosis of Alport syndrome, the following four diagnostic criteria are very important : renal disease, family history, deafness or eye abnormalities, and a specific finding on electron microscopy. We expect that more patients can be detected through the analysis of these characteristics.

• Journal of radiological science and technology
• /
• v.40 no.2
• /
• pp.187-195
• /
• 2017

Early diagnosis for upper facial trauma is difficult by using the standard Water's view (S-Water's) in general radiograph due to overlapping of anatomical structures, the uncertainty of patient positioning, and specific patients with obese, pediatric, old, or high-risk. The purpose of this study was to analyze appropriate exposure angles through a comparison of two different protocols (S-Water's vs. reverse Water's view (R-Water's)) by using a head phantom. A head phantom and general radiograph with 75 kVp, 400 mA, 45 ms 18 mAs, and SID 100 cm. Images of R-Water's were obtained by different angles in the range of $0^{\circ}$ to $50^{\circ}$, which adjusted an angle at 1 degree interval in supine position. Survey elements were developed and three observers were evaluated with four elements including the maxillary sinus, zygomatic arch, petrous ridge, and image distortion. Statistical significant analysis were used the Krippendorff's alpha and Fleiss' kappa. The intra-class correlation (ICC) coefficient for three observers were high with maxillary, 0.957 (0.903, 0.995); zygomatic arch, 0.939 (0.866, 0.987); petrous ridge, 0.972 (0.897, 1.000); and image distortion, 0.949 (0.830, 1.000). The high-quality image (HI) and perfect agreement (PA) for acquired exposure angles were high in range of the maxillary sinus ($36^{\circ}-44^{\circ}C$), zygomatic arch ($33^{\circ}-40^{\circ}$), petrous ridge ($32^{\circ}-50^{\circ}$), and image distortion ($44^{\circ}-50^{\circ}$). Consequently, an appropriate exposure angles for the R-Water's view in the supine position for patients with facial trauma are in the from $36^{\circ}$ to $40^{\circ}$ in this phantom study. The results of this study will be helpful for the rapid diagnosis of facial fractures by simple radiography.