• 전자공학회논문지CI
• /
• 제48권2호
• /
• pp.106-116
• /
• 2011

USN(Ubiquitous Sensor Network) 환경은 언제, 어디서나 정보를 이용할 수 있게 한다. 이러한 환경의 기반이 되는 기술은 타겟의 정확한 위치설정을 전제로 한다. 특히 ITS(Intelligent Transportation Systems)는 USN 기술을 적용함으로써 쉽게 구축 될 수 있다. 위치측정은 Range-based 방식과 Range-free 방식으로 나눌 수 있다. Range-based 방식은 전파의 불규칙하고 추가 장비가 필요로 센서네트워크기반 위치측정에 적합하지 않은 것으로 알려져 있다. 반면에 Range-free 방식은 능동적인 통신을 수단으로 위치를 측정하므로 자원제약적인 센서네트워크에서는 적합한 것으로 알려져 있다. 그러나 Range-free 방식은 일반적으로 정확성이 부족하며, 특히 밀집도가 낮은 환경에서는 정확성이 매우 낮다. 따라서 이 두 기법은 장단점을 가지고 있다. 그러므로 두 기법을 혼합하여 위치추적의 정확성을 개선할 수 있는 새로운 기법이 요구된다. 본 논문은 Range-free 방식을 개선할 수 있도록 추가 장비가 요구되지 않은 RSSI(Received Signal Strength Indication) 신호 값을 분류하고 주변노드의 위치와 통신범위 및 세기정보를 최대한 활용하여 이동차량을 보다 정확하게 추적할 수 있는 Range-hybrid 기반의 위치추적기법을 제시한다. 추가적으로 예측기법을 활용하여 위치추적의 정확성을 획기적으로 개선할 수 있는 방안을 제시한다. 그리고 시뮬레이션 결과, 제안된 기법이 기존 위치추적 알고리즘 보다 교통 환경에서 위치추적의 정확도가 우수함을 증명하였다.

• 전자공학회논문지CI
• /
• 제47권2호
• /
• pp.54-64
• /
• 2010

위치측정은 사용자나 사물에게 주변 환경에 대한 인식을 가능케 하는 기본적인 요소이기 때문에 센서네트워크 환경에서는 가장 핵심적인 요소이다. 기존 위치측정 기법은 크게 Range-based방식과 Range-free방식으로 나눌 수 있다. Range-based방식은 전파의 불규칙하고 추가 장비가 필요한 반면에 Range-free방식은 능동적인 통신을 수단으로 위치를 측정하므로 자원제약적인 센서네트워크에서는 적합한 것으로 알려져 있다. 그러나 위치측정의 정확성이 주변노드의 수에 따라 크게 좌우된다. 특히 밀집도가 낮은 센서네트워크 환경에서는 위치측정의 정확성이 매우 낮다. 본 논문에서 제안된 DRTS(Distributed Range-hybrid Tracking Scheme)는 Range-based와 Range-free방식을 혼합하고 주변노드의 위치와 통신범위 및 세기정보를 최대한 활용하여 이동물체를 추적할 수 있는 기법을 제시한다. 특히 주변노드를 최대한 활용한 효율적인 위치측정기법과 제안된 EGP(Estimative Gird Points)의 예측기법을 활용하여 위치추적의 정확성을 획기적으로 개선할 수 있는 방안을 제시한다. 그리고 시뮬레이션 결과를 통해 기존 위치추적 알고리즘 보다 추적의 정확도 관점에서 제안된 기법의 성능이 우수함을 증명하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제5권1호
• /
• pp.1-9
• /
• 2016

Range-based wireless localization system must measure accurate range between a mobile node (MN) and reference nodes. However, non-line-of-sight (NLOS) error caused by the spatial structures disturbs the localization system obtaining the accurate range measurements. Localization methods using the range measurements including NLOS error yield large localization error. But filter-based localization methods can provide comparatively accurate location solution. Motivated by the accuracy of the filter-based localization method, a filter residual-based NLOS error estimation method is presented in this paper. Range measurement-based residual contains NLOS error. By considering this factor with NLOS error properties, NLOS error is mitigated. Also a process noise covariance matrix tuning method is presented to reduce the time-delay estimation error caused by the single dynamic model-based filter when the speed or moving direction of a MN changes, that is the used dynamic model is not fit the current dynamic of a MN. The presented methods are evaluated by simulation allowing direct comparison between different localization methods. The simulation results show that the presented filter is more accurate than the iterative least squares- and extended Kalman filter-based localization methods.

• 대한전자공학회논문지
• /
• 제27권9호
• /
• pp.1448-1455
• /
• 1990

In this paper, a range image segmentation method is proposed. This method consists of an initial segmentation stage by discontinuous edge detection and surface type labeling based on the sign of the principal curvatures. Initially type labeled image is oversegmented, this image is merged via stepwise optimal region merging stage based on polynomial function approxiamtion. The successful segmentation results are presented for two synthetic range images with noise and a real-world ERIM range image.

• 전기학회논문지
• /
• 제61권4호
• /
• pp.632-638
• /
• 2012

ZigBee network, based on PHY, MAC layer provides a specification for a suite of high level communication protocols using small, low-power digital radio based on an IEEE 802.15.4 standard. Meshing is a type of daisy chaining from one device to another. This technique allows the short range of an individual node to be expanded and multiplied, covering a much larger area. Each wireless technology that makes it to market serves a special purpose or function. Zigbee provides short-range connectivity in what is called a personal-area network (PAN). Within ZigBee PAN coordinator as manages an entire ZigBee network, the short range of frequency band was only selected because the technology allows typically less than 100 kbp or ZigBee troubles in retransmission processing and delaying data tranmission works to create unproductive condition of work. This research was proposed the method, based on short range frequency of zigBee nodes enable to long range of remote data transmission with specific algorithm tools.

• 대한인간공학회지
• /
• 제31권3호
• /
• pp.463-467
• /
• 2012

This study aims to empirically investigate population stereotype of burner-control linkage of four-stove gas range for Koreans. Background: The previous studies' results for gas range stereotypes were different depending upon methods adopted, i.e., whether using questionnaires, computer simulation or physical models. It is known that the physical model experiment should not be methodologically replaced by the computer simulation or paper-and-pencil tests. Stereotype of gas range for Koreans was surveyed based on questionnaires, but has not been dealt with by using physical models. Method: An experiment was conducted to investigate stereotype of four-burner gas range, in which 32 subjects participated and a real gas range available in the market was bought and used. Four types of burner-control linkage were used as independent variable, and reaction time as dependent variable. Results: ANOVA revealed that four types of burner-control linkage and subjects' gender were not significant on reaction time. Duncan's multiple range test showed that reaction times for type III was significantly lower than those for the other three types of burner-control linkage(${\alpha}$=0.05). Conclusion: It is concluded based on the results of this study that stereotype of gas range for Koreans is type III. This is in agreement with results of existing studies using questionnaire survey, while different from those based on physical models. Application: The results of this study would be useful as an ergonomic guideline when designing gas ranges or similar equipments for minimizing operation errors.

• 전자공학회논문지S
• /
• 제34S권5호
• /
• pp.66-72
• /
• 1997

In this paper, we propose a method improving the accuracy of th eregistration coefficients calculated form two range images considering the measurement error. The employed range finder is based on triangulation and the depth measurement error is described with an error covariance matrix, which is based on thesensitivity of the range measurements. Experimental results demonstrate that the registration coefficients obtained with the proposed method are better than the results when the measurment errors are neglected.

• Journal of the Korean Statistical Society
• /
• 제12권2호
• /
• pp.69-80
• /
• 1983

The purpose of this paper is to obtain representation of the mathematical special functions and the numerical values of the mean square errors for the quasi-ranges in random small smaples ($n \leq 30$) from the Weibull distribution with a shape and a scale parameters, and to estimate the scale parameter by use of unbiased estimator based on the quasi-range. It will be shown that the jackknife estimator of the range is worse than the range of random samples from the given distribution in the sense of the mean square error.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2359-2364
• /
• 2017

This paper proposes a scale factor based range estimation method using a sum of squares (SOS) method. Many previous studies measured distance by using a camera, which usually required two cameras and a long computation time for image processing. To overcome these disadvantages, we propose a range estimation method for an object using a single moving camera. A SOS-based Luenberger observer is proposed to estimate the range on the basis of the Euclidean geometry of the object. By using a scale factor, the proposed method can realize a faster operation speed compared with the previous methods. The validity of the proposed method is verified through simulation results.

• 산업경영시스템학회지
• /
• 제38권3호
• /
• pp.64-77
• /
• 2015

An effective method for produce munitions effectiveness data is to calculate weapon effectiveness indices in the US military's Joint Munitions Effectiveness Manuals (JMEM) and take advantage of the damage evaluation model (GFSM) and weapon Effectiveness Evaluation Model (Matrix Evaluator). However, a study about the Range Safety that can be applied in the live firing exercises is very insufficient in the case of ROK military. The Range Safety program is an element of the US Army Safety Program, and is the program responsible for developing policies and guidance to ensure the safe operation of live-fire ranges. The methodology of Weapon Danger Zone (WDZ) program is based on a combination of weapon modeling/simulation data and actual impact data. Also, each WDZ incorporates a probability distribution function which provides the information necessary to perform a quantitative risk assessment to evaluate the relative risk of an identified profile. A study of method to establish for K-Range Safety data is to develop manuals (pamphlet) will be a standard to ensure the effective and safe fire training at the ROK military education and training and environmental conditions. For example, WDZs are generated with the WDZ tool as part of the RMTK (Range Managers Tool Kit) package. The WDZ tool is a Geographic Information System-based application that is available to operational planners and range safety manager of Army and Marine Corps in both desktop and web-based versions. K-Range Safety Program based on US data is reflected in the Korean terrain by operating environments and training doctrine etc, and the range safety data are made. Thus, verification process on modified variables data is required. K-Range Safety rather than being produced by a single program, is an package safety activities and measures through weapon danger zone tool, SRP (The Sustainable Range Program), manuals, doctrine, terrain, climate, military defence M&S, weapon system development/operational test evaluation and analysis to continuously improving range safety zone. Distribution of this K-range safety pamphlet is available to Army users in electronic media only and is intended for the standing army and army reserve. Also publication and distribution to authorized users for marine corps commands are indicated in the table of allowances for publications. Therefore, this study proposes an efficient K-Range Safety Manual producing to calculate the danger zones that can be applied to the ROK military's live fire training by introducing of US Army weapons danger zone program and Range Safety Manual