• Structural Engineering and Mechanics
• /
• 제59권6호
• /
• pp.1055-1070
• /
• 2016

The aim of this experimental study is to investigate the free vibration and buckling behaviors of hybrid composite beams having different span lengths and orientation angles subjected to different impact energy levels. The impact energies are applied in range from 10 J to 30 J. Free vibration and buckling behaviors of intact and impacted hybrid composite beams are compared with each other for different span lengths, orientation angles and impact levels. In free vibration analysis, the first three modes of hybrid beams are considered and natural frequencies are normalized. It is seen that first and second modes are mostly affected with increasing impact energy level. Also, the fundamental natural frequency is mostly affected with the usage of mold that have 40 mm span length (SP40). Moreover, as the impact energy increases, the normalized critical buckling loads decrease gradually for $0^{\circ}$ and $30^{\circ}$ oriented hybrid beams but they fluctuate for the other beams.

• 가족자원경영과 정책
• /
• 제2권1호
• /
• pp.33-46
• /
• 1998

This study was designed to examine the propensity for conspicious consumption of housewives and its influential variables on it. The purpose of this study also is to suggest some fundamental information of consumer education program and policy, in order to prevent consumers from over consumption. The samples were selected from housewives lived in Seoul, in 1997. The 457 subjects were analyzed by Frequency, Mean, t-test, ANOVA, Duncan’s Multiple Range Test, and Regression. Consequently, the propensity for conspicious consumption of housewives is influenced not only by the individual factor, but also by the more effect of psychological and social effects. Therefore, based on the findings it is required that we will have to reinforce the consumer education, so that they have rational consumer’s conscious based upon desirable values. And this education is treated a matter as important by social view.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.113-114
• /
• 2015

In this study, 1D and 3D thermoacoustic analysis model were developed in order to predict fundamental characteristics of combustion instability in a gas turbine lean premixed combustor. The 1D network model can be used to analyze frequency and growth rate of combustor instability by simply dividing whole system into a couple of acoustic sub-elements, while the 3D Helmholtz solver model can predict directly acoustic modes as well as basic properties of combustion instability. Prediction results of both 1D and 3D models generally showed a good agreement with the measurements, even if there was a slight overestimation for instability range.

• 수산해양기술연구
• /
• 제33권3호
• /
• pp.183-188
• /
• 1997

어종의 식별을 위한 음향학적 정보를 추출해 내는 데 활용하기 위한 초음파 변환기를 설계하기 위한 시도의 하나로꺼 전극분할 원반형 압전진동자를 이용하여 공진주파기를 가변시켜 넓은 주파수 대역에 걸쳐 사용할 수 있는 어군탐지기용 송.수파기를 설계하였다. 본 연구에서 설계한 초음파 변환기는 전극분할형 압전진동자의 한쪽 전극에 발전기를 접속하고, 다른 쪽 전국에 2.7~15.0 mH 인덕턴스를 접속하였을 때, 경방향에 대한 공진 주파스는 49.5~ 55.7 kHz의 범위에서 가변시킬 수 있었고, 또한 외부에서 진동자에 인가한 임피던스의 영향에 의해 출현하는 공진주파수에는 61.3~121.7 kHz의 범위에서 가변시킬수 있었다. 그러나, 이들 주파수에 대한 전기음향효율을 고려 할때, 실제로 활용할 수 있는 주파수 범위는 이것보다 훨씬 좁은 폭이 될 것이라 판단된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권1호
• /
• pp.19-27
• /
• 2009

Globally, customer appreciation and demand for quieter products has driven noise control engineers to develop efficient and quieter products in a relatively short time. In the vehicles and ship industry, noise has become an important attribute because of the competitive market and increasing customer awareness. Noise reduction is often achieved through structural modifications by typical approaches. In the present paper, author describes a fundamental study on optimum design of curvature. Bezier curve. and rib attachment to reduce noise from simple panel using a genetic algorithm(GA). The acoustic optimization procedure employed p-FEM for structural analysis, the Rayleigh integral method for acoustic analysis and the GA for searching optimum design. In the optimization procedure. the objective function to be minimized is the average sound power radiated from an objective structure over a given frequency range $0{\sim}300$ Hz.

• 소음진동
• /
• 제7권5호
• /
• pp.781-787
• /
• 1997

A new method is presented to determine two fundamental acoustic quantities of sound-absorbing materials such as characteristic impedance and propagation constant. In this study, the surface acoustic impedances of sound-absorbing materials are measured using the impedance tube and the anechoic chamber to determine the above acoustic quantities. The measured results are given for two typical sound-absorbing materials(glass wool and urethane foam) int the frequency range between 150 and 1, 600 Hz. The results are verified by other two known methods, which are Smith & Parrott method and Utsuno et al. method. The absorption coefficients calculated from the empirical models(Miki model for glass wool and Jung model for urethane foam) and two quantities by present method are in good agreement with the measured values.

• 한국통신학회논문지
• /
• 제30권2A호
• /
• pp.107-113
• /
• 2005

본 논문에서는 통신소자의 경박 단소화 추세에 따라 적층 세라믹 SMD(surface mounted device) 패키지기술을 통하여 소형화한 $5{\times}7mm$의 크기의 VCXO를 개발한다. 이때 안정된 입력신호를 공급하기 위하여 양의 이미터결합논리(PECL)를 이용하고, 역메사형 HFF(high frequency fundamental) 기법을 이용하여 제작한 수정소자로 IC에 설계함으로써 동작전압은 3.3 V, 저전력하에서 120MHz-180MHz 범위의 주파수에서 발진하며, Q인자는 5 K이상, 3.5 ps rms의 낮은 지터(Jitter)와 위상잡음 특성 및 일정기간의 경화실험에서도 안정된 출력특성을 보인다.

• Advances in aircraft and spacecraft science
• /
• 제10권3호
• /
• pp.223-243
• /
• 2023

There is a burgeoning demand for minimizing the mass of satellites because of its direct impact on reducing launch-to-orbit cost. This must be done without compromising the structure's efficiency. The present paper introduces a relatively low-cost and easily implementable approach for optimizing structural mass to a maximum natural frequency. The natural frequencies of the satellite are of utmost pertinence to the application requirements, as the sensitive electronic instrumentation and onboard computers should not be affected by the vibrations of the satellite structure. This methodology is applied to a realistic model of Al-Azhar University micro-satellite in partnership with the Egyptian Space Agency. The procedure used in structural design can be summarized in two steps. The first step is to select the most favorable primary structural configuration among several different candidate variants. The nominated variant is selected as the one scoring maximum relative dynamic stiffness. The second step is to use perforation patterns reduce the overall mass of structural elements in the selected variant without changing the weight. The results of the presented procedure demonstrate that the mass reduction percentage was found to be 39% when compared to the unperforated configuration that had the same plate thickness. The findings of this study challenge the commonly accepted notion that isogrid perforations are the most effective means of achieving the goal of reducing mass while maintaining stiffness. Rather, the study highlights the potential benefits of exploring a wider range of perforation unit cells during the design process. The study revealed that rectangular perforation patterns had the lowest efficiency in terms of modal stiffness, while triangular patterns resulted in the highest efficiency. These results suggest that there may be significant gains to be made by considering a broader range of perforation shapes and configurations in the design of lightweight structures.

• 한국수산과학회지
• /
• 제34권2호
• /
• pp.151-155
• /
• 2001

해양 목장에서 음향 순치 대상 어종으로 사용할 수 있는 볼락의 청각 문턱치를 기본으로 하여 음향 어법의 기초 자료를 제공할 목적으로 볼락의 백색 잡음에 대한 청각 임계비와 학습 및 유집을 위한 방성 음압 강도를 조사한 결과는 다음과 같다. 음압 73, 78, 83dB의 3단계 백색 잡음을 방성하였을 때 볼락의 청각 문턱치는 백색 잡음이 없을 때보다 높게 나타나 마스킹 현상이 나타났고, 주파수 300Hz에서 보다 높게 나타났다. 볼락의 청각 임계비는 측정 주파수 80, 100, 200, 300, 500, 800Hz에서 음압이 대략 28, 34, 26, 30, 47, 52dB이고 마스킹 현상은 주파수 300Hz에서 음압 65dB의 잡음 레벨에서 나타나기 시작하였고 그 외의 주파수에서는 음압 68dB 이상에서 나타났으며, 볼락이 주파수 $200\~300$Hz에서 신호음을 인식하기 위해서는 음압 96dB 이상, 잡음 레벨보다 약 26dB 이상의 높은 음압이 요구되었다.

• 수산해양교육연구
• /
• 제12권1호
• /
• pp.1-10
• /
• 2000

해양목장에서 음향순치 대상 어종으로 사용할 수 있는 조피볼락의 청각능력을 파악하여 해양목장화의 기초자료를 제공할 목적으로 조피볼락의 백색잡음에 대한 청각 임계비와 학습 및 유집을 위한 방성음압 강도를 조사한 결과는 다음과 같다. 음압 74, 78, 83의 3단계 백색잡음을 방성하였을 때 조피볼락의 청각문턱치는 백색잡음이 없을 때보다 높게 나타나 마스킹 효과가 나타났고, 주파수 300Hz에서 보다 높게 나타났다. 조피볼락의 청각임계비는 측정주파수 80, 100, 200, 300, 500, 800Hz에서 음압이 대략 21, 19, 22, 30, 54, 46dB이고 마스킹 현상은 주파수 300Hz에서 음압 65dB의 잡음레벨에서 나타나기 시작하였고 그외의 주파수에서는 음압 70dB이상에서 나타났으며 주파수 100 - 200Hz에서 신호음을 인식하기위해서는 음압 90dB이상, 잡음레벨보다 약 20dB이상의 높은 음압이 요구되었다.